M and R to C Category quarters C9 to C12 at port colony Morbi

BILL OF QUANTITIES

Sign of Contractor Executive Engineer ( C )

BILL OF QUANTITIES

1. The bill of Quantities shall be read in conjunction with the Instructions to Bidder,

Conditions of Contract, Technical Specifications and Drawings.

2. The quantities given in the Bill of Quantities are estimated and provisional, and are given

to provide a common basis forbidding. The basis of payment will be the actual quantities

of work ordered and carried out, as measured by the Contractor and verified by the

Engineer and valued at the rates and prices tendered in the priced Bill of Quantities,

where applicable, and otherwise at such rates and prices as the Engineer may fix within

the terms of the Contract.

3. The rates and prices tendered in the priced Bill of Quantities shall, except in so far as it

is otherwise provided under the Contract, include all constructional plant, layout,

supervision, materials, erection, maintenance, insurance, profit, taxes and duties,

together with all general risks, liabilities and obligations set out or implied in the

4. The rates and prices shall be quoted entirely in Indian Currency.

5. A rate or prices shall be entered against each item in the Bill Quantities, whether

quantities are stated or not. The cost of Items against which Contractor has failed to

enter a rate or price shall be deemed to be covered by other rates and prices entered in

the Bill of Quantities (in case of Item rate contract).

6. The whole cost of complying with the provisions of the Contract shall be included in the

items provided in the priced Bill of Quantities, and where no Items are provided the cost

shall be deemed to be distributed among the rates and prices entered for the related

7. General direction and descriptions of work and materials are not necessarily repeated

or summarized in the Bill of Quantities. References to the relevant sections of the

contract documentation shall be made before entering rates or prices against each item

in the Bill of Quantities.

8. The method of completed work of payment shall be in accordance with the specification

mentioned in this contract.

9. Errors will be corrected by the Employer for any arithmetic errors pursuant to

Clause29 of the Instructions to Bidder.

10. Rock is defined as all materials which, in the opinion of the Engineer, required blasting,

or the use of metal wedges and sledgehammers, or the use of compressed air drilling for

its removal, and which cannot be extracted by ripping with a tractor of at least 150 kw

with a single rear mounted heavy duty ripper.

Sign of Contractor Executive Engineer ( C )

BILL OF QUANTITIES

Name of work: M & R to “C” Category quarters C1 to C4 at port colony

(A) Percentage Rate Tender (Up to INR 50 Cr.)

Item Description of Item (with brief specification Quantity Unit Rate In Amount

No and reference to book of specifications) figures

Dismantling tiled or stone floors laid in mortar

including stacking of serviceable materials and`

disposal of unserviceable materials with all lead

Dismantling old plaster racking out joints and

cleaning the surface to make ready for new

plastering including disposal of rubbish to the

dumping ground with all lead and lift.

Providing 10 mm thick cement plaster in single

coat on walls for interior plastering up to floor two

level and finished even and smooth in cement

mortar 1:4 (1 cement : 4 fine sand )

Applying general insecticide pest control

treatment to walls, floors, wood work such as

doors, cup-boards, furniture etc. Including labour,

material etc. Complete.

Providing and applying plaster of paris putty of

5 average 2mm thickness over plastered surface to 621.00 sqm 211.30

prepare the surface even and smooth.

Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

WALL surface to give an even shade including

thoroughly brushing the surface free from mortar

droping and other foreign matter and sand

papered smooth.

Wall painting (two coat) with plastic emulsion

paint of approved brand and manufacture on

CEILING/SLOPING ROOF surface to give an

even shade including thoroughly brushing the

surface clean of all dirt, grease, loose pieces of

scales and sand papered smooth.

Painting two coat excluding priming coat on

new/previously painted wood and wood based

8 surfaces with enamel paint to give an even shade 196.00 sqm 107.90

including cleaning of all dirt, dust and other

foreign matter.

Painting one coat excluding priming coat on

previously painted steel and other metal surfaces

9 with synthetic enamel paint, bushing to give an 112.00 sqm 65.50

even shade including cleaning the surface of all

dirt, dust and other foreign matter.

Sign of Contractor Executive Engineer ( C )

Providing and Laying 24" x 24" vitrified 8mm thick

tile flooring over 20mm (average) base of cement

mortar 1:6 or LM 1:1.5 laid on new surface OR

fixing on existing flooring by adhesive materials

10 excluding dismantling of existing flooring and 278.00 sqm 779.40

jointed with colour apoxy slurry including finished

with flush pointing & cleaning the surface etc.

complete for Antiskid A directed by Architect &

Providing and Laying Polished Granamite vitrified

tiles of required size and 8 mm to 10mm thick of

approved make and colour having homogeneous

materials in skirting, dedo etc. on 10mm thick

cement plaster 1:3 (1 cement: 3 coarse sand) and

pointed with white cement slurry.

Providing and fixing LOW HEIGHT STORAGE

making of cup board with 18mm Gurjan Ply wood

with complete accessories and Hardware fittings

12 including kitchen basket with channel with inner 9.20 sqm 22500.00

laminate 0.80 mm thick and out side laminate

1mm thick as per Drawing and directed by

engineer in charge etc. complete

Providing and Fixing storage unit of specified

depth having 19 mm thick shutters of

plywood/HDHMR with laminate finish inner and

outer decorative for cupboards including partition

partition etc. including stainless steel

(nonmagnetic) butt hinges, screws & all fixtures

etc complete as directed by EIC/Architect(Fully

Repairing and refixing shutters for doors,

windows, and clearstory windows including

stainless steel (nonmagnetic) butt hinges, screws,

fixtures etc. . for fully / Partly paneled and partly

glazed (4mm thick glass) including cutting bottom

rail of door shutters for floor tiles fixing.

Providing & Laying Granite slab (18mm th) one

side polished over 20 mm (average) base of

cement mortar 1:5 (1 cement : 5 coarse sand)

and jointed with cement slurry OR fixing on

existing flooring by adhesive materials excluding

dismantling of existing flooring and jointed with

colour apoxy slurry including mirror polishing

Dismantling doors, windows, ventilators etc.

(wood or steel) shutters including chowkhats,

16 holdfasts and other attachment etc. complete and 8.00 Each 249.10

stacking them within all lead and lift. ( i ) Not

exceeding 3 sq.m. in area

Providing and Fixing glazed louvered glass

17 windows and ventilators fixed at spacing not 2.00 sqm 2256.30

exceeding 100mm c/c etc. complete

Dismantling sanitary fittings like wash basin, W.C. pan

18 (Indian and European type), flushing tank etc. 12.00 Each 357.90

Including stacking the materials with all lead and lift.

Providing and fixing water closet squatting pan

(indian type w.c. Pan) size 580 mm (earthwork,

bed concrete foot rests and trap to be measured

and paid for separately.)(a) vitreous china

Sign of Contractor Executive Engineer ( C )

( i ) long pattern white colour

Providing and Fixing 100 mm size 'P' or 'S' trap

for water closet squatting pan including jointing

20 the trap with the pan and soil pipe in cement 4.00 Each 487.80

mortar 1:1 ( 1 cement : 1 fine sand)

(A) Vitreous china pattern - I

Providing & fixing (Simpolo make) or Equivalent

Crystal wall vit pan of size 490L 360W 350H with

fitting & s trap of approved design complete

including painting of fittings and brackets, cutting

and making good the walls and floors wherever

required complete as directed by EIC/ Architect

Providing and Fixing PVC flushing tank 12.5 litre

capacity of approved quality with all accessories

including making inlet and out let connections etc

Providing and Fixing wash basin with single hole

for pillar tap with CI or MS Brackets painted white

including cutting holes and making good the

same but excluding fittings. (a) Vitreous china

(ii) flat back wash basin 550 x 400 mm size in

Providing and Fixing C.P. Brass towel rail

complete with C.P. Brass brackets fixed to

wooden plugs with C.P. Brass screws.

( B ) 600 x 20 mm size

Providing and Fixing cast iron (spun) nahni trap of

the following nominal diameter or self-cleaning

25 design with CI screwed down or hinged grating 4.00 Each 965.10

including cost of cutting and making good the

walls and floors 100 mm inlet and 50 mm outlet.

Proiding and Fixing 15 x 15 cm stainless steel

grating for gully, floor or nahni trap

Proiding and Fixing rectangular mirror of

approved quality and size 600x 450 mm with

plastic moulded frame of approved make and

shade with 6mm thick hard board backing.

Providing and Fixing C.P. Brass shower rose with

28 15 mm or 20 mm inlet. 4.00 Each 326.00

( A ) 100 mm dia.

Providing and Fixing screw down bib tapes of the

following size.

( A ) Brass screw down bib polished bright

( I ) 15 mm dia C.P.

Providing and Fixing pillar tap capstan head

screw down high pressure lettered "HOT" or

30 "COLD" with long screws, shanks and back nuts 4.00 Each 443.00

of following nominal bore ( A ) 15 mm dia

Providing and fixing two way bib taps of Jaquar :

FLR 5041 N / Cera / Benelave or equivalent

31 make following size complete as directed by EIC / 4.00 Nos 1601.00

Architect (A) Brass screw down bib taps

polished bright (i)15mm

Providing & fixing hand shower health faucet of a

brass body with wall hook and 1.5 m hose of

Jaquar : ALD : 573 / Cera / Benelave or

equivalent complete as directed by EIC/ Architect

Sign of Contractor Executive Engineer ( C )

Providing and Fixing chromium plated brass half

turn flush cock of approved quality including fixing

in pipe line complete.

( I ) 20 mm dia

Providing and fixing 25mm and 15mm dia CPVC

& UPVC pipe as per requirement for tap,

valve,etc. including material and labour charge for

34 making chases fixing the pipe with clamps jointing 4.00 Each 3050.00

of pipes and fittings with suitable solvent

complete as per direction of engineer in charge

concealed work for 1 washroom/Bathroom

Providing and fixing 25mm and 15mm dia UPVC

pipe as per requirement for tap, valve,etc.

including material and labour charge for making

35 chases fixing the pipe with clamps jointing of 4.00 Each 2601.00

pipes and fittings with suitable solvent complete

as per direction of engineer in charge concealed

work for 1 toilet -W/C

Providing & Laying white glazed tiles 6 mm thick

in flooring, treads of steps and landing laid on a

36 bed of 12 mm thick cement mortar 1:3 (1 cement 14.50 sqm 1499.10

: 3 coarse sand) finished with flush pointing in

Providing & Laying white glazed tiles 6 mm thick

in skirting, risers of steps and dado on 10 mm

thick cement plaster 1:3 (1 cement : 3 coarse

sand) and jointed with white cement slurry.

I/We am/are willing to carry out the work at… .................. %above/below percent (Should

Be written in figures and words) of the estimated rate mentioned above. Amount of my / our tender

works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………%below Add………%Above

In words In words

1 The Contractor shall exhibit a board with detailed specification and details of work as

directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rulesi.e.1%oftheworkdone.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R.: PRC-10/2017 Cement Consumption/16/CDate:11/05/2017as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item

At the rate of input rate mentioned in all the tender.

Sign of Contractor Executive Engineer ( C )