SPL REPAIR REPLACEMENT OF OLD LT PANEL FEEDER PILLAR BOX UG CABLE AND PROVN OF NEW 26 25 LTRS GEYSERS FOR DSC BATHROOMS DSC GUARD POST COOK HOUSE AT IMA DEHRADUN

Amount

Taking down old LT panel indoor type complete, including MCCB. MCB, Timer, Contactor etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors etc, complete all as specified and directed.

Taking down old LT panel outdoor type complete, including MCCB. MCB, Timer, Contactor etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors etc,complete all as specified and directed.

Taking down old LT panel/busbar chamber outdoor type complete, including MCCB. MCB, Timer, Contactor etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors etc,complete all as specified and directed.

Supplying, install, commissioning and testing of factory made indoor type, Lt switchgear panel board of size not less than 1500mmx1500mmx500mm , IP-54 , 415 volts, 50 Hz, AC supply, three phase and neutral (4 wire), 1000 Amp Aluminium bus bar, 4 pole, duly insulated with heat shrinkable sleeves as per colour code supported on epoxy insulators, having independent compartment fot insulated bus bar, incoming feeder and each out going feeder i.e cubical type, made out of 2.0 mm thick CRCA sheet, rigid mild steel channel iron frame of 75mmx40mm (approx size (1500mm length and 500mm width x2 )with grouting in PCC 1:3:6 type C-2 block of Size 200x200x200mm, duly epoxy poweder coated internally and externally with approved shade, rubber gasketted, hinged front and back openable doors with proper locking arrangement for dust and vermin proof, complete including suitable size cable alley, lugs, cable glands, common earth bus bar of GI strip 32x6mm at bottom and making connection with MCCB sepreters, wiring with suitable size 1.5 Sqmm SC PVC insulated copper conductor cable, suitable compartment openable and locking arrangement with keys including old unserviceable taking our all as specified and directed:- (a) Aluminium bus bar 1000 Amps rating 3 phase 4 wire system. (b) Digital voltmeter 0-500 V - 01 Nos. (c) Digital ammeter 0-1000 Amps with CTs – 01 Set. (d) LED type indicator 230 volts for RYB – 01 Set. (e) ACB 4 Pole, 415 volts with Thermal Magnetic Release (Manual Drawout type) of capacity 630 Amps - 01 Nos (Incoming). Outgoings:- (a) MCCB 415 volts, 4 pole 400 Amps with breaking capacity 36 KA-01 No. (b) MCCB 415 volts, 4 pole 250 Amps with breaking capacity 36 KA-04 Nos. (c) MCCB 415 volts, 4 pole 100 Amps with breaking capacity 16 KA – 02 Nos. Make:- SHALABH INDIA LTD,BRIGHT PANEL DEHRADUN, POWER SYESTEM AND CONTROL

Supply, installation, commissioning and testing factory made LT panel,size not less than 1500mmx1500mmx500mm suitable for 3 phase, 4 wire, 440 Volts AC supply, outdoor cubical type, dust and vermin proof powder coated, made out of 3.15 mm thick CRCA sheet with angle iron frame made out of MS angle 50 x 50 x 6 mm both side openable double door type with proper locking arrangements duly finished with using powder coated paint of approved colour over a coat of red oxide primer all over steel surfaces with 75 cm high angle iron legs welded on four corners of frame embedded in PCC 1:2:4 using 20 mm graded stone aggregate upto 30 cm foundation and proper glanding, lugs and nuts bolts etc for all cables and comprising of following accessories including disconnecting and taking down existing panel etc complete all as directed with sufficient working space with and including to accomodate the following accessories: - (a) Aluminium bus bar 1000 Amps rating 3 phase 4 wire system. (b) Digital voltmeter 0-500 V - 01 Nos. (c) Digital ammeter 0-1000 Amps with CTs – 01 Set. (d) LED type indicator 230 volts for RYB – 01 Set. (e) MCCB 630 Amp, 4 Pole, 415 volts with breaking capacity 50 KA - 01 Nos (Incoming). Outgoings:- (a) MCCB 415 volts, 4 pole 200 Amps with breaking capacity 36 KA-05 Nos. (b) MCCB 415 volts, 4 pole 100 Amps with breaking capacity 16 KA – 02 Nos. (c) Power contactor for timer-01 (d) Time switch for security light-01 Make:- SHALABH INDIA LTD,BRIGHT PANEL DEHRADUN, POWER SYESTEM AND CONTROL

Supply, installation, commissioning and testing factory made LT panel board uitable for 3 phase, 4 wire, 440 Volts AC supply, outdoor cubical type, dust and vermin proof powder coated, made out of 3.15 mm thick CRCA sheet (not less than 1.2m x1m x .5m) with angle iron frame made out of MS angle 50 x 50 x 6 mm both side openable double door type with proper locking arrangements duly finished with using powder coated paint of approved colour over a coat of red oxide primer all over steel surfaces with 75 cm high angle iron legs welded on four corners of frame embedded in PCC 1:2:4 (using 20 mm graded stone aggregate) upto 30 Cm foundation and proper glanding, lugs and nuts bolts etc for all cables and comprising of following accessories including disconnecting and taking down existing panel etc complete all as directed with sufficient working space with and including to accomodate the following accessories: - (a) Aluminium bus bar 600 Amps rating 3 phase 4 wire system. (b) Digital voltmeter 0-500 V - 01 Nos. (c) Digital ammeter 0-400 Amps with CTs – 01 Set. (d) LED type indicator 230 volts for RYB – 01 Set. (e) MCCB 415 volts, 4 pole 400 Amps with breaking capacity 36 KA-01 Nos (Incoming). Outgoing:- (a) MCCB 415 volts, 4 pole 300 Amps with breaking capacity 36 KA – 01 Nos (b) MCCB 415 volts, 4 pole 100 Amps with breaking capacity 16 KA – 02 Nos. Make:- SHALABH INDIA LTD,BRIGHT PANEL DEHRADUN, POWER SYESTEM AND CONTROL

Supply, installation, commissioning and testing factory made LT panel board suitable for 3 phase, 4 wire, 440 Volts AC supply, outdoor cubical type, dust and vermin proof powder coated, made out of 3.15 mm thick CRCA sheet (not less than 1.2m x1m x .5m) with angle iron frame made out of MS angle 50 x 50 x 6 mm both side openable double door type with proper locking arrangements duly finished with using powder coated paint of approved colour over a coat of red oxide primer all over steel surfaces with 75 cm high angle iron legs welded on four corners of frame embedded in PCC 1:2:4 (using 20 mm graded stone aggregate) upto 30 Cm foundation and proper glanding, lugs and nuts bolts etc for all cables and comprising of following accessories including disconnecting and taking down existing panel etc complete all as directed with sufficient working space with and including to accomodate the following accessories: - (a) Aluminium bus bar 600 Amps rating 3 phase 4 wire system. (b) Digital voltmeter 0-500 V - 01 Nos. (c) Digital ammeter 0-400 Amps with CTs – 01 Set. (d) LED type indicator 230 volts for RYB – 01 Set. (e) MCCB 415 volts, 4 pole 400 Amps with breaking capacity 36 KA-01 Nos (Incoming). Outgoing:- (a MCCB 415 volts, 4 pole 160 Amps with breaking capacity 36 KA – 03 Nos (b) MCCB 415 volts, 4 pole 100 Amps with breaking capacity 16 KA – 01 Nos. Make:- SHALABH INDIA LTD,BRIGHT PANEL DEHRADUN, POWER SYESTEM AND CONTROL

Supply, installation, commissioning and testing factory made LT panel board suitable for 3 phase, 4 wire, 440 Volts AC supply, outdoor cubical type, dust and vermin proof powder coated, made out of 3.15 mm thick CRCA sheet (not less than 1.2m x1m x .5m) with angle iron frame made out of MS angle 50 x 50 x 6 mm both side openable double door type with proper locking arrangements duly finished with using powder coated paint of approved colour over a coat of red oxide primer all over steel surfaces with 75 cm high angle iron legs welded on four corners of frame embedded in PCC 1:2:4 using 20 mm graded stone aggregate upto 30 cm foundation and proper glanding, lugs and nuts bolts etc for all cables and comprising of following accessories including disconnecting and taking down existing panel etc complete all as directed with sufficient working space with and including to accomodate the following accessories: - (a) Aluminium bus bar 400 Amps rating 3 phase 4 wire system. (b) Digital voltmeter 0-500 V - 01 Nos. (c) Digital ammeter 0-250 Amps with CTs – 01 Set. (d) LED type indicator 230 volts for RYB – 01 Set. (e) MCCB 415 volts, 4 pole 250 Amps with breaking capacity 36 KA-01 Nos (Incoming). Outgoing:- (a MCCB 415 volts, 4 pole 160 Amps with breaking capacity 36 KA – 03 Nos ( WT Area near T-281, near th bn Kote, Kheterpal auditorium) Make:- SHALABH INDIA LTD,BRIGHT PANEL DEHRADUN, POWER SYESTEM AND CONTROL

Supply, installation, commissioning and testing factory made LT panel board suitable for 3 phase, 4 wire, 440 Volts AC supply, outdoor cubical type, dust and vermin proof powder coated, made out of 3.15 mm thick CRCA sheet (not less than 1.2m x1.3m x .6m) with angle iron frame made out of MS angle 50 x 50 x 6 mm both side openable double door type with proper locking arrangements duly finished with using powder coated paint of approved colour over a coat of red oxide primer all over steel surfaces with 75 cm high angle iron legs welded on four corners of frame embedded in PCC 1:2:4 using 20 mm graded stone aggregate upto 30 cm foundation and proper glanding, lugs and nuts bolts etc for all cables and comprising of following accessories including disconnecting and taking down existing panel etc complete all as directed with sufficient working space with and including to accomodate the following accessories: - (a) Aluminium bus bar 600 Amps rating 3 phase 4 wire system. (b) Digital voltmeter 0-500 V - 01 Nos. (c) Digital ammeter 0-400 Amps with CTs – 01 Set. (d) LED type indicator 230 volts for RYB – 01 Set. (e) MCCB 415 volts, 4 pole 400 Amps with breaking capacity 36 KA-01 Nos (Incoming). Outgoing:- (a MCCB 415 volts, 4 pole 250 Amps with breaking capacity 36 KA – 02 Nos (b) MCCB 415 volts, 4 pole 160 Amps with breaking capacity 16 KA – 02 Nos. Make:- SHALABH INDIA LTD,BRIGHT PANEL DEHRADUN, POWER SYESTEM AND CONTROL

Material and labour for bus bar chamber, outdoor type, pedestal type of size 75 cm x 60 cm x 40 cm out door dust and vermin proof front opening made out of 3.15 mm thick MS sheet duly painted and consisting with aluminium bus bar 3 phase and neutral 4 Nos 300 Amp fixed on insulators and one MCCB FP 250 Amp, 25 KA rupturing capacity including necessary angle iron legs fixed in PCC 1:3:6 using 20 mm graded stone aggregate including danger plate etc complete all as specified and directed. Make:- SHALABH INDIA LTD,BRIGHT PANEL DEHRADUN, POWER SYESTEM AND CONTROL

Material and labour for bus bar chamber, outdoor type, pedestal type of size 75 cm x 60 cm x 40 cm out door dust and vermin proof front opening made out of 3.15 mm thick MS sheet duly painted and consisting with aluminium bus bar 3 phase and neutral 4 Nos 150 Amp fixed on insulators and one MCCB FP 100 Amp, 16 KA rupturing capacity including necessary angle iron legs fixed in PCC 1:3:6 using 20 mm graded stone aggregate including danger plate etc complete all as directed. Make:- SHALABH INDIA LTD,BRIGHT PANEL DEHRADUN, POWER SYESTEM AND CONTROL

Supply, laying, jointing and testing 300 Sqmm, 3.5 Core XLPE insulated, armoured heavy duty under ground electric cable with stranded aluminium conductor 1100 volt grade including taking out/down old existing unserviceable cable all as directed of following sizes. Note: Excavation, sand cushioning and brick protection shall be measured and paid separately under respective items of BOQ.

Supply, laying, jointing and testing 95 Sqmm, 3.5 Core XLPE insulated, armoured heavy duty under ground electric cable with stranded aluminium conductor 1100 voltage grade including taking out/down old existing unserviceable cable all as directed of following sizes. Note: Excavation, sand cushioning and brick protection shall be measured and paid separately under respective items of BOQ.

Material and labour for 80 mm bore galvanised steel tube light grade ISI marked for protection of LT UG cable laid in trenches/ under road/drain and floor including FI clamps, nuts, bolts, washers etc all as required at site fixed in repairs complete all as directed.

Material and labour for cable end termination indoor/outdoor heat shrinkable type suitable for XLPE cable size 240 to 300 Sqmm 3.5 core fixed in repairs complete all as directed. Make: 'M’ Seal, Raychem, Denson

Material and labour for cable end termination indoor/outdoor heat shrinkable type suitable for XLPE cable size 70 to 150 Sqmm 3.5 core fixed in repairs, complete all as directed. Make: 'M’ Seal, Raychem, Denson

Earthing complete for machinery equipment installed at power house/sub station with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to GI strip 32 mm X 6mm main earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron and steel protected with 40mm dia light grade GI pipe all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) for earth pit with 40 x 40 x 6 mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 40mm dia GI light grade earth lead protection pipe etc complete all as specified and directed. Note: (i) Earth strip and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth lead & protection pipe, if any, required at site shall be measured and paid for separately under appropriate item of sch 'A'. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted.

Supply and fixing LT cable root indicator of cast iron embedded in PCC 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate) of size 100x100x200 mm foundation upto ground level including necessary earth work in any type of soil complete all as specified and directed.

Excavation in trenches n. exc. 1.5 mtr wide and n. exc. 1.5 mtr in depth in soft/lose soil for laying cable/taking out under ground cable, GI pipes and bricks laid under cable and getting out in soft/loose soil complete all as directed.

Returning, filling in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick in soft/lose soil after cable/pipes are laid and tested complete all as directed.

Removing the excavated soil to a distance n. exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point complete all as directed.

Material and labour for sand cushioning to under ground cables 8 Cm thick before laying the cable and 15 Cm, thick after laying, stretching and testing the cable complete all as directed. Note: Punned thickness shall be measurement and paid.

Material and labour for un-reinforced precast concrete cable cover LV type I, flat size 250 mm X 150 mm X 40 mm as protection to underground cable laid dry and flat adjoining each other complete all as directed.

S & F sub main wiring with PVC insulated unsheathed FRLSH cable 1100 Volt grade, with multi stranded copper conductor drawing in and including rigid PVC conduit in concealed / surface as required at site including one run PVC insulated unsheathed cable with multi stranded copper conductor colour code as a earth continuity and connected upto DB of 2 x 4Sqmm + 1 x 4 sqmm sizes complete all as specified and directed. Make: Finolex, Polyacab, GEMSCAB,Gloster Note:Two/Four run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface with using PVC rawl plugs etc.

S & F sheet metal enclosure, single pole and neutral with two pin and earth plug and socket with and including one single pole MCB 20 Amps, , complying to IS/IEC 60898, 240 volts 'C' Curve 10 KA with energy limiting class 3. The MCB shall have 50% lower watt loss as required by IS/IEC 60898 from 6A to 63A . The mcb shall have the unique property of di-electric strength, arc resistance, insulation, flame retardancy and temperature resistance, including connection with suitable size copper lugs, The MCB shall give visible flag indication when MCB trips on Short Circuit Fault. The MCB shall have safety shutter to avoid any wrong insertion of cable. The MCB shall have the termination capacity of 35 Sq mm. The MCB shall have electrical life 20,000 operations up to 32A and 12,000 operation up to 63A including connection with suitable size copper lugs complete all as directed. All the above-mentioned speces technical documents from OEM shall be provided at the time of bidding.

Supply and fix Electric water heater ,storage type steel body with copper inner tank and heating element upto 2 kw capacity 25 ltr BEE 5 star rating complete with all acessories such as safety valve, thermostate, NRV, connection pipe and fastener for fixing geyser, complete all as directed. Make:- JAQUAR, CROMPTION, HAVELLS, BAJAJ

S & F MCB SP complying to IS/IEC 60898, 240 volts 'B' Curve 10 KA with energy limiting class 3. The MCB shall have 50% lower watt loss as required by IS/IEC 60898 from 6A to 63A . The MCB shall have the unique property of di-electric strength, arc resistance, insulation, flame retardancy and temperature resistance, including connection with suitable size copper lugs, The MCB shall give visible flag indication when MCB trips on Short Circuit Fault. The MCB shall have safety shutter to avoid any wrong insertion of cable. The MCB shall have the termination capacity of 35 Sq mm. The MCB shall have electrical life 20,000 operations up to 32A and 12,000 operation up to 63A including connection with suitable size copper lugs complete all as directed. All the above-mentioned speification/ technical documents from OEM shall be provided at the time of bidding of MCB SP6 to 32 Amp.240 volts capaity. Make: Legrand, L&T, ABB, Schneider

M & L for Drilling and Tapping water mains ( in position) for branch connectionby inseting tee as per site requirement including saddle piece and nuts and bolts, complete all as directed.

Supply and Fixing tube medium grade galvanised 15mm dia with all fitting and fixed complete to wall and ceiling or laid under floors, complete all as directed.

Supply and fix Hot water pipe duly insulated with glass wool and alluminium clading 15mm bore, complete all as directed.

Supply and Fix Self closing tap cast copper alloy,chromium plated 15mm dia, complete all as directed.

Supply and Fix angle cock cast copper alloy,chromium plated 15mm dia, complete all as directed. Make- Jaquar Essco (Orbit series)/ Cera(Victor series)/Prayag Polymer (700 series).

Ansh Enterprises

JS CONSTRUCTION COMPANY

M/s Kamal Traders

Amit Engineering