Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.5 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | Rejected-Technical THIRUVILAKKIL SANATHANAPURAM P O ALAPPUZHA AMBALAPPUZHA TALUK ALAPPUZHA DISTRICT | - | Rejected-Technical L2 | |
| 3 | Rejected-Technical | - | Rejected-Technical L3 |
| Sl No | Description | Qty | Unit | PT APPACHAN L1 | BAIJU V L2 | SAI CONSTRUCTIONS L3 |
|---|---|---|---|---|---|---|
| 1.00TRUSS WORK | ||||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 1.28 | cum | 251.8 ₹322.3 Lowest | 294.25 ₹376.64 | 337.42 ₹431.9 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1.01 | cum | 6,465.18 ₹6,516.9 Lowest | 7,555.02 ₹7,615.46 | 8,663.34 ₹8,732.65 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1,195 | kg | 160.86 ₹1,92,227.7 | 153.01 ₹1,82,846.95 Lowest | 175.45 ₹2,09,662.75 |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 104.38 | sqm | 724.24 ₹75,596.17 | 688.87 ₹71,904.25 Lowest | 789.93 ₹82,452.89 |
| 1.00 | OD304522/2025-2026:Supplying and fixing 6inch dia PVC rain water gutter square section including fitting with 32mmx5mm MS flat supporters etc. complete | 32 | metre | 304.54 ₹9,745.28 Lowest | 355.87 ₹11,387.84 | 408.08 ₹13,058.56 |
| 1.01 | 50.18.9.17.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall | 28 | metre | 203.95 ₹5,710.6 Lowest | 238.33 ₹6,673.24 | 273.3 ₹7,652.4 |
| 1.01 | 50.12.2.2:Providing & fixing Poly carbonate multi wall plain sheet 4 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size (5.5x55mm) with EPDM seal complete upto any pitch in horizontal / vertical / curved surfaces, but excluding the cost of purlins, rafters, trusses and including cutting to size and shapes where ever required. | 36.8 | sqm | 535.75 ₹19,715.6 Lowest | 626.06 ₹23,039.01 | 717.91 ₹26,419.09 |
| 1.01 | 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | 3,000 | Litre | 8.51 ₹25,530 Lowest | 9.94 ₹29,820 | 11.4 ₹34,200 |
| 1.01 | 18.50.1:Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore | 2 | each | 627.68 ₹1,255.36 Lowest | 733.49 ₹1,466.98 | 841.1 ₹1,682.2 |
Tender Value
₹4.2 L
EMD Value
₹10,583
Closing Date
1 Nov 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Assistant Engineer
LSGD PUNNAPRA SOUTH
Annual Plan- Punnapra South GP 2025-26 Truss work in panchayath market-S0231/26
2025_LSGD_814656_18
05T/AE/LSGD/PSGP
Open Tender
Civil Works - Buildings
Item Wise
180 days
punnapra south gp
Please refer Tender documents.
7 documents required · 7 mandatory
₹935
Yes
₹10,583
Yes
17 Nov 2025
25 Oct 2025
3 Nov 2025
25 Oct 2025
1 Nov 2025
25 Oct 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1363047.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.85 MB
viewsbd.pdf
Tender Documents • 1.66 MB
BOQ_1363047.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .