LIGHTING WORK AT PILOT BUNGALOW TO DIGJAM CIRCLE UNDER SJMMSVY

Name of Work :- LIGHTING WORK AT PILOT BUNGALOW TO DIGJAM CIRCLE UNDER SJMMSVY

Description Qty Unit Rate

Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole should be made

as per IS. and shall be coated with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local

wind speed with integral Junction box consist of terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and arrangement for cable termination to

be erected With Suitable foundation (Included) as per details given by manufacturer considering site

(G) 8 Mtr. Long 70 mm Top X 155 mm bottom dia, 3 mm thickness with 260mmX260mmX16mm base

plate, 4-M20 Bolts and 600mm long with necessary G.I. J Bolts Approx Pole weight 84 kg

Creative design cum functional decorative brackets cap type Hot Dip Galvanized Iron (HDGI) Double Arm

2 Bracket 1.5 Mtr. 48 mm OD size + SS Ball. (GCI 25)

Supplying and erecting Flat plate strip of Bakelite material in pole door reinforcement place for fixing

3 of double pole MCB and other accessories like porcelain type connector 5 way of 60 Amp. With mounting 50 Each 400.00

screws, with nuts bolts & washers suitable for erection on pole & earth bolt

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate, modules erected with necessary

connections as per site situation directed by Engineer In charge. (13) 6A/10A/16A/20A/25A/32A Single

pole Modular MCB Switch. ( Make :- L&T/Legrand/Havells/Siemens/Schneider)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for

5 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (C) 4 1600 Mtr. 152.00

core 16 Sq. mm (Make :- Allcab/polycab/RR/Finolex)

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq.

mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following

size. (c) 3 wire 1.5 sq. mm (Make :- Relexo, Fenolex, R.R brand)

Providing C:C foundation and Pole installation at site including G.I. octagonal pole foundation structure

with necessary G.I. J Bolts M-20 J-bolt of 750 mm length - 4 bolt Foundation of 500x500x1.0 mtr and

cement concrete as per 1:2:3 (20 to 25mm stone metal C:C: plinth with necessary curing and finishing in

approved manner for 6/7/8 mtr pole C C

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron pipe with

8 coupling and buch buried in specially prepared earth pit complete with necessary 8 SWG earth wire for 50 Each 365.00

Galvenised Octagonal Poles.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any size

9 of cable or locating the fault all over the run and back filling the same and making the surface as normal 1000 Mtr 74.00

10 (B) If additional machinery like hammer driller or JCB use [Add] 150 Mtr 354.00

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to

11 IS 14930 II )with necessary connecting accessories of same material at required depth in existing trench 1000 Mtr 62.00

for laying of cable. below ground / road surface for enclosing cable (A)50 mm outer dia

Dismantling the existing underground cable without damaging it with glands, cable end box including

refilling the trench up to ground level and making coils complete to be placed at different store.

Installation the existing any type of fittings above 6 mtr height pole from pole with bracket complete.

(fitting provide by JMC)

Dismantling work of still tubular pole/guarder pole and carting at destination provide by JMC (only labour

Dismantling the existing any type of street light fittings on pole up to 6 mt height with bracket and making

the site as original complete.

Labour Work for removing the Existing Pole Junction Box, and Installation of New MCB

Cap type bracket fitting/removing as per in charge instructions on the top of Octagonal pole with

17 wiring of 1.5sq.mm with necessary fasteners. and installation of MCB with Bakelite strip do the 40 Each 100.00

Supplying and erecting Control Panel with Procelin cut out complete with Zinc oxide

copper terminal/contacts rewireble (as per IS) 100 Amp X 500 volt Stainly, Single Dial

Time switch , L & T Brand, Water proof Plywood 25 MM thick 3" X 2" side, Copper bus

18 bar of 19MM X 5MM thick from 100 Amp cutout to contactor point with hole & fixing 1 Each 37740.00

with support RYB connection incoming & Out going side, Control panel box of 3 X 2.5 X

1 feet with double door haldraft can be locked with necessary fasteners one coat red oxide

and two coat of oil paint, L & T contactor ML-6

Excavation for foundation upto 1.5 mt dept incl. sorting out and staking of useful

materials and disposing off excavated stuff upto 3.0 K.M. lead and lift

(SOR P.No. 67, I.C.No. 04001A to 04001E 1 No.0)

(d) Soft rock not required blasting

( 0.36 Cum X 50 Nos. Pole = 18 Cum)

Description Qty Unit Rate

Provinding and Laying controlled cement concrete for various grade as mention below

including temping, vibrating, finishing curing etc. complete including the cost of from

work but excluding the cost of reinforcement, and filling the expansion joint including

20 proposing the and washing with water etc. complete 18 CUM 4347.01

(c) M250 ( SOR P.No. , item. No. 5.8.3)(05025AA)

( 0.36 Cum X 50 Nos. Pole = 18)

Provinding & laying cement concrete 1:2:4(1-Cement:2-Coarse Sand:4-Crushed stone aggregate

20 mm nominal size) and curing complete excluding cost of from work in

(A) Foundation & plinth

(SOR P.No. 74 IC No. 05010AA Item No. 5.3.13)

( 0.036 Cum X 50 Nos. Pole = 1.8)

“B” class Galvanised iron pipe having smooth finished bore of the pipe on both ends erected

22 nuts and bolts along the pole / wall shaping the pipe as per site requirement. Pipe dia as 100 Rmt 298.00

following. (d) 50 mm dia

I/we We I / We am/are willing to carry out the work at ____% above / below the estimated rates:-

I/We hereby declare that I/We studied the conditions of contract, detailed technical specification and

other tender documents of this work and agree to execute the same accordingly. Deputy Engineer

Jamnagar Municipal Corporation