Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.4 LAccepted-AOC | L1 | Accepted-AOC Lowest and reasonable | |
| 2 | L2₹10.5 L+₹1.6 L (17.9%)Rejected-Finance 129 A NICHLI CHOWKI DEVI NAGAR SECTOR 32 PANCHKULA HARYANA 134109 | PANCHKULA | HARYANA | 134109 | L2 | Rejected-Finance Not lowest |
Tender Value
₹12.2 L
EMD Value
₹24,300
Closing Date
15 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Surya Shreedhar GE (AF) Bareilly
Garrison Engineer (AF) Military Engineer Services Bareilly - 243002
PERIODICAL REPAIR AND MAINT ALONGWITH MINOR OVERHAULING SERVICES ETC OF VARIOUS TYPES OF GEN SETS OF VARIOUS CAPACITY WITH MISC CONNECTED ITEMS AT AF STATION BAREILLY
2022_MES_535649_2
8666/E8
Open Tender
Electrical and Maintenance Works
Item Rate
335 days
BAREILLY
CLASS E CATEGORY b(i)
7 documents required · 7 mandatory
₹500
Yes
GE (AF) Bareilly
₹24,300
Yes
13 Sept 2022
1 Aug 2022
17 Aug 2022
1 Aug 2022
15 Aug 2022
3 Aug 2022
Amount
Repair to DG Set engine of capacity 160 KVA make Kirlosker/ Cumins 1500 RPM, water / air cooled by dismantling/strip opening of the DG Set for overhauling by removing the cylinder head piston, connecting rod, cylinder liner, oil sump and injector etc including commissioning, testing as per manufacturer's instructions complete all as specified and as directed. Note:- Repair work shall be carried out by the OEM/Authoirised dealer only. All the spare/ parts shall be of OEM only and shall be measured and paid for separately under item no 2.00 to 16.00.
Supply only of Piston, Piston ring with piston pin complete all as specified and directed.
Supply only Liner with packing O ring complete all as specified and as directed.
Supply only LE Bearing complete all as specified and as directed.
Supply only Small end Bush complete all as specified and as directed.
Supply only Engine Gasket set complete all as specified and as directed.
Supply only Head gasket set complete all as specified and as directed.
Supply only Thrust Washer complete all as specified and as directed.
Supply only Barrel plunger and cup complete all as specified and as directed.
Supply only Main bearing complete all as specified and as directed.
Supply only Oil seal rear complete all as specified and as directed.
Supply only Oil seal front complete all as specified and as directed.
Supply only Valve guide complete all as specified and as directed.
Supply only Valve seat complete all as specified and as directed.
Supply only Valve seal complete all as specified and as directed.
Supply only Valve complete all as specified and as directed.
Maintenance /servicing of DG Set 320 KVA, 6 cylinder make Kirlosker, water cooled type including replacement of 02 nos fuel filter and 01 no oil filter, air filter-01 etc, by carrying out `B` check as per manufacturer's maintenance chart complete all as specified and as directed.
Maintenance /servicing of DG Set 200 to 250 KVA 6 cylinder make Kirlosker, water cooled type including replacement of 02 nos fuel filter and 02 nos oil filter, air filter-01 No etc, by carrying out `B` check as per manufacturer's maintenance chart complete all as specified and as directed.
Maintenance /servicing of DG Set 160 KVA mke Cummins/Kirlosker, diesel engine 6 cylinder including replacement of 02 nos fuel filter and 02 nos oil filter, Air filter-01 no etc, by carrying out `B` check as per manufacturers maintenance chart complete all as specified and as directed.
Maintenance /servicing of DG Set 100 KVA to 125 KVA make Kirlosker/ Cummins, diesel engine any model including replacement of 02 nos fuel filter and 02 nos oil filter, air filter-01 etc, by carrying out `B` check as per manufacturer's maintenance chart complete all as specified and as directed.
Maintenance /servicing of DG Set 30 KVA to 75 KVA make Kirlosker/Cummins, diesel engine any model including replacement of 02 nos fuel filter and 02 nos oil filter, air filter-01 etc, by carrying out `B` check as per manufacturer's maintenance chart complete all as specified and as directed. NOTE FOR ITEM NO. 17.00 TO 21.00:- The Servicing/Maintenance/Repair has to be carried out by the OEM/Authorised dealer only. All the spares of OEM only as required is included in the quoted rates. Engine oil as required shall be issued by the Deptt as free for use under schedule'B' and cost of the replacement of engine oil shall be deemed to be included in the unit rate of these items.
M&L for washing, cleaning and repairing of Radiator assembly of DG set of size 30 KVA to 75 KVA by proper opening and refixing back after repair, washing & cleaning in same existing position properly complete all as specified and as directed by Engr- in -Charge.
M&L for washing, cleaning and repairing of Radiator assembly of DG set of size 100 KVA to 160 KVA by proper opening and refixing back after repair, washing, cleaning in same existing position properly complete all as specified and as directed.
M&L for washing, cleaning and repairing of Radiator assembly of DG set of size 200 KVA to 320 KVA by proper opening and refixing back after repair, washing, cleaning in same existing position properly complete all as specified and as directed by Engr- in- Charge.
M&L for taking out FIP from DG Sets of cap 200 KVA to 320 KVA and replace the following items:- Plunger - 06 Nos, Delivery valve – 06 No, Bearing - 02 Nos, Bearing Bush – 02 Nos, Niddle valve– 06 Nos & grinding of nozzles complete and re-fixing the same complete all as specified and as directed by Engr- in- Charge.
M&L for taking out FIP from DG Sets of cap 100 KVA to 160 KVA and replace the following items:- Plunger - 06 Nos, Delivery valve – 06 Nos, Bearing - 02 Nos, Bearing Bush – 02 Nos, Niddle valve– 06 Nos & grinding of nozzles complete and re-fixing the same complete all as specified and as directed by Engr- in- Charge.
M&L for taking out FIP from DG Sets of cap 30 KVA to 75 KVA and replace the following items:- Plunger - 04 Nos, Delivery valve – 04 Nos, Bearing - 02 Nos, Bearing Bush – 02 Nos, Niddle valve– 04 Nos & grinding of nozzles complete and re-fixing the same suitable for DG sets complete all as specified and as directed by Engr- in- Charge. NOTE FOR ITEM NO 25.00 TO 27.00:- Repair work shall be carried out by the OEM/Authorised dealer only. All the spares of OEM only as required deemed to be included in the quoted rates.
S&F as in replacement of Water circulatting pump/water body suitable for 200 KVA to 320 KVA capacity DG Sets, make Kirlosker/ Cummins, complete all as specified and as directed by Engr-in charge.
S&F as in replacement of Water circulatting pump/water body suitable for 100 KVA to 160 KVA capacity DG Sets, Kirlosker/ Cummins make complete all as specified and as directed by Engr-in charge.
S&F as in replacement of Water circulatting pump/water body suitable for 30 KVA to 75 KVA capacity DG Sets, Kirlosker/ Cummins make, complete all as specified and as directed by Engr-in charge.
S&F in replacement of shut down valve for 200 to 320 KVA DG set of make Cummins/Kirlosker diesel engine including necessary electric connection to AMF panel and engine control panel board complete all as specified and as directed.
S&F in replacement of shut down valve for 100 to 160 KVA DG set of make Cummins/Kirlosker diesel engine including necessary electric connection to AMF panel and engine control panel board complete all as specified and as directed.
S&F in replacement of shut down valve for 30 to 75 KVA DG set of make Cummins/Kirlosker diesel engine including necessary electric connection to AMF panel and engine control panel board complete all as specified and as directed.
Supply and fixing groved belt of size A-47 as per manufacturer's requirement complete all as specified and as directed. Make- Fenner or as approved by the GE.
Supply and fixing groved belt of size A-50 as per manufacturer's requirement complete all as specified and as directed. Make- Fenner or as approved by the GE.
Supply and fixing groved belt of size A-52 as per manufacturer's requirement complete all as specified and as directed. Make- Fenner or as approved by the GE.
Supply and fixing groved belt of size B-35 as per manufacturer's requirement complete all as specified and as directed. Make- Fenner or as approved by the GE.
Supply and fixing groved belt of size B-38 as per manufacturer's requirement complete all as specified and as directed. Make- Fenner or as approved by the GE.
Supply and fixing groved belt of size B-39 as per manufacturer's requirement complete all as specified and as directed. Make- Fenner or as approved by the GE.
Supply and fixing groved belt of size B-42 as per manufacturer's requirement complete all as specified and as directed. Make- Fenner or as approved by the GE.
Supply and fixing groved belt of size C-48 as per manufacturer's requirement complete all as specified and as directed. Make- Fenner or as approved by the GE.
Supply and fixing groved belt of size B-46 as per manufacturer's requirement complete all as specified and as directed. Make- Fenner or as approved by the GE.
Supply and fixing groved belt of size SPA-1250 as per manufacturer's requirement complete all as specified and as directed. Make- Fenner or as approved by the GE.
Supply and fixing groved belt of size A-58 as per manufacturer's requirement complete all as specified and as directed. Make- Fenner or as approved by the GE.
M&L for dismantling of complete fuel tank, disconnect fuel pipe from DG Sets for capacity 200 KVA to 320 KVA and refixing same after proper cleaning of fuel tank and replacement of fuel pipe of existing size with and including two coat of synthetic enamel paint by spray painting over a coat of red oxide primer complete with PCC Work & welding work complete all as specified and as directed by Engr- in- charge. Note:- Quoted rates deemed to be included for opening of DG set canopy for removing of Fule tanks which are provited bottoms base plate of DG sets.
Description all as per srl item no 45.00 bere in before but of DG Sets of capacity 100 KVA to 160 KVA complete all as specified and as directed.
Description all as per srl item no 45.00 bere in before but of DG Sets of capacity 30 KVA to 75 KVA complete all as specified and as directed.
S&F in replacement of Solenoid coil 24 volts DC operated with lead and fixing clamps complete all as specified and as directed by Engr-in-charge.
S&F in replacement of Solenoid coil 12 volts DC operated with lead and fixing clamps complete all as specified and as directed by Engr-in-charge.
M&L for replacement of hose pipe set complete with clamp and other fitting as required at site for 200 to 320 KVA capacity DG sets of make Kirlosker/ Cummins complete all as specified and as directed by Engr-in-charge.
M&L for replacement of hose pipe set complete with clamp and other fitting as required at site for 100 to 160 KVA capacity DG sets of make Kirlosker/ Cummins complete all as specified and as directed by Engr-in-charge.
M&L for replacement of hose pipe set complete with clamp and other fitting as required at site for 30 to 75 KVA capacity DG sets of make Kirlosker/ Cummins complete all as specified and as directed by Engr-in-charge.
S&F diesel fuel inlet/outlet wire, braided flexible hose pipe of 20mm dia with clamps clips for make Cummins/Kirlosker DG set complete all as specified and as directed.
M&L for disconnecting & opening of alternator and removing existing stator, rotor, AVR, Diode etc from DG sets of capacity 200 to 320 KVA for rewinding of stator, rotor and exciter etc, and refixing same complete all as specified and as directed by Engr - in charge. Note;- Repair work shall be carried out by the OEM/Authoirised dealer only. Rewinding of stator, rotar and exciter shall be measured and paid seperately.
Rewinding of stator complete of supper enamelled copper wire as per existing size for DG sets of capacity 200 to 320 KVA for making complete serviceable of alternator complete all as specified and as directed by Engr-in-charge.
Rewinding of Rotor main winding complete of supper enamelled copper wire as per existing size for DG sets of capacity 200 to 320 KVA for making complete serviceable of alternator complete all as specified and as directed by Engr-in-charge.
Rewinding of Rotor Exciter winding complete of super enamelled copper wire as per existing size for DG sets of capacity 200 to 320 KVA for making complete serviceable of alternator complete all as specified and as directed by Engr-in-charge.
Replacement of Auto Voltage Regulation with wire connection and connecting to existing field coil 24 volt DC for capacity of DG set 200 KVA to 320 KVA complete all as specified and as directed. Make-Kirlosker/cummins.
Replacement of Auto Voltage Regulation with wire connection and connecting to existing field coil 24 volt DC for capacity suitable for DG set 125 KVA to 160 KVA complete all as specified and as directed. Make-Kirlosker/cummins.
S&F Auto voltage regulation with wire connection and connecting to existing field coil 12 Volt DC for capacity suitable for 63 to 100 KVA DG set complete all as specified and directed. Make-Kirlosker,/cummins.
S&F Auto voltage regulation with wire connection and connecting to existing field coil 24 Volt DC for capacity suitable for 30 to 50 KVA DG set complete all as specified and directed. Make-Kirlosker,/cummins.
S&F in replacement of alternator 24 Volts (for charging of battery) complete all as specified and as directed. Make:- LUCAS or approved by GE.
S&F in replacement of alternator 12 Volts (for charging of battery) complete all as specified and as directed. Make:- LUCAS or approved by GE.
M&L for repair /replacement of DG Sets canopy's door hinges and repair to lock system by welding as per existing site complete all as specified and as directed by Engr-in charge.
M&L for rewinding to self starter of capacity 24 volts by taking out old burnt out copper winding wire and rewinding with supper enameled copper wire of same gauge as per existing including replacement of unserviceable pinion, bush, solenoid coil, carbon brushes and tension spring complete and commissioning and testing complete all as specified and as directed.
M&L for rewinding to self starter of capacity 12 volts by taking out old burnt out copper winding wire and rewinding with supper enameled copper wire of same gauge as per existing including replacement of unserviceable pinion, bush, solenoid coil, carbon brushes and tension spring complete and commissioning and testing complete all as specified and as directed.
Replacement of slip ring made out of brass or copper moulded in epoxy compound with lead etc. Suitable for 30 KVA to 320 KVA DG Sets of make Kirlosker/Cummins complete all as specified and as directed.
M&L as in replacement of Engine starting control Relay for on and off of DG set suitable for capacity 200 to 320 KVA DG Set complete all as specified and as directed. Make : Kirlosker /Siemens/BCH.
M&L as in replacement of Engine starting control Relay for on and off of DG set suitable for capacity 100 to 160 KVA DG Set complete all as specified and as directed. Make : Kirlosker /Siemens/BCH.
M&L as in replacement of Engine starting control Relay for on and off of DG set suitable for capacity 30 to 75 KVA DG Set complete all as specified and as directed. Make : Kirlosker /Siemens/BCH.
S&F RPM meter showing hour run on same dial 90 mm dia size, range 0-2500 RPM with adaptor including cable connection suitable for 30 to 320 KVA capacity Kirloskar DG set complete all as specified and as directed. Make:- Pricol.
M&L for disconnecting & opening of alternator for servicing of capacity 200 to 320 KVA DG Set including coupling alligment and replacement of ball bearing & bearing bush -02 Nos and cleaning of insulation with backtol varnishing of windings complete all as specified and as directed by Engr - in -charge.
M&L for disconnecting & opening of alternator for servicing of capacity 100 to 160 KVA DG Set including coupling alligment and replacement of ball bearing & bearing bush -02 Nos and cleaning of insulation with backtol varnishing of windings complete all as specified and as directed by Engr - in -charge.
M&L for disconnecting & opening of alternator for servicing of capacity 30 to 75 KVA DG Set including coupling alligment and replacement of ball bearing & bearing bush -02 Nos and cleaning of insulation with backtol varnishing of windings complete all as specified and as directed by Engr - in -charge.
S&F Battery lead with thimble and terminal heavy duty made out of brass & 2 mtr length of lead complete all as specified and as directed.
S&F Battery lead with thimble and terminal heavy duty made out of brass & 60 cm length of lead complete all as specified and as directed.
Re-conditioning of userviceable battey 12 Volts 150/180 AH, 25 plates by replacing the dead cells and providing proper electrolyte solution including wash the corroded terminal with ammonia solution complete all as specified and as directed by Engr-in-Charge.
S&F of control panel governor PCB plate suitable for DG sets of capacity 200 KVA to 320 KVA make and model as per existing including taking out old unserviceable control panel governor plate and necessary testing and commissioning of DG sets complete all as specified and as directed .
S&F DG Base Card suitable for DG sets of capacity 200 KVA to 320 KVA make and model as per existing including taking out old unserviceable Base Card and necessary testing and commissioning of DG sets complete all as specified and as directed .
S&F ampere transformer of control panel suitable for DG Sets of capacity 30 KVA to 320 KVA make and model as per existing including taking out old unserviceable Amp transformer of control panel and necessary testing and commissioning of DG Sets complete all as specified and as directed.
S&F EMS 907 digital display of control panel suitable for DG Sets of capacity 75 KVA to 125 KVA make and model as per existing including taking out old unserviceable EMS 907 digital display of control panel and necessary testing and commissioning of DG Sets complete all as specified and as directed.
S&F EMS 907 digital display of control panel suitable for DG Sets of capacity 200 KVA to 320 KVA make and model as per existing including taking out old unserviceable EMS 907 digital display of control panel and necessary testing and commissioning of DG Sets complete all as specified and as directed.
S&F control panel without digital display suitable for DG Sets of any make, model, type and capacity as per existing including taking out old unserviceable control panel unit, making all electric and eletronic connections and necessary testing and commissioning of DG Dets complete all as specified and as directed.
S&F in replacement of moulded case circuit breaker adjustable thermal and adjustable magnetic setting of capacity 160 Amps, 415V, four pole of CN frame, breaking capacity 25 kA complete all as specified and as directed. Make:- Cat part no IHLANDC40160 of make Havells or equivalent of make L&T /ABB /Indo Asian/ HPL.
S&F in replacement of moulded case circuit breaker adjustable thermal and adjustable magnetic setting of capacity 200 Amps, 415V, four pole of CN frame, breaking capacity 25 kA complete all as specified and as directed. Make:- Cat part no IHLANDC40200 of Make Havells or equivalent of make L&T /ABB /Indo Asian/ HPL.
S&F in replacement of moulded case circuit breaker adjustable thermal and adjustable magnetic setting of capacity 250 Amps, 415V, four pole of CN frame, breaking capacity 25 kA complete all as specified and as directed. Make:- Cat part no IHLANDC40250 of Make Havells or equivalent of make L&T /ABB /Indo Asian/ HPL.
S&F in replacement of moulded case circuit breaker adjustable thermal and adjustable magnetic setting of capacity 320 Amps, 415V, four pole of CN frame, breaking capacity 36 kA complete all as specified and as directed. Make:- Cat part no IHLLSEC40320 of Make Havells or equivalent of make L&T /ABB /Indo Asian/ HPL.
S&F in replacement of moulded case circuit breaker adjustable thermal and adjustable magnetic setting of capacity 400 Amps, 415V, four pole of CN frame, breaking capacity 36 kA complete all as specfied and as directed. Make:- Cat part no IHLLSEC40400 of Make Havells or equivalent of make L&T /ABB /Indo Asian/ HPL.
S&F as in replacement under or over voltage relay suitable for 03 phase AC supply, 415 volts complete all as specified and as directed.
S&F as in replacement ET type electronic timer suitable for 12/24 volts DC supply for 0-30 seconds as per manufacturer of DG set complete all as specified and directed
S&F as in replacement ET type electronic timer suitable for 12/24 volts DC supply for 0-180 seconds as per manufacturer of DG set complete all as specified and as directed.
S&F as in replacement engine starting relay with sequence timer and master timer suitable for 24/12 volts DC supply as per recommendations of the manufacturer of DG sets complete all as speified and as diected.
S&F in replacement Battery charging transformer Engine starting relay wih sequence timer and master timer suitable for 24/12 volts DC supply as per recommendations of the manufacturer of DG sets complete all as specified and as directed.
S&F in replacement Auto/Manual/Test switch complete all as specified and as directed.
S&F in replacement battery charging indicator lamp complete all as specified and as directed. Make:- L&T, LEGRAND, SIEMENS, C&S, ABB.
S&F in replacement LED type indicating lamp for DG set Mains side each complete all as specified and as directed. Make:- L&T, LEGRAND, SIEMENS, C&S, ABB.
S&F in replacement complete rewiring of DG set as per recommendations of manufacturer of the DG set as given in circuit diagram, suitable for DG set of capacity 30 KVA to 320 KVA as per existing size/gauge of wire with and including replacement of all uncerviceable connectors, fuses, minor electric parts and necessary testing and commissioning complete all as specified and as directed.
Supply only Aluminium Lugs suitable for cable of size 240 sqmm x 3.5 core complete all as specified and as directed.
Supply only Aluminium Lugs suitable for cable of size 185 sqmm x 3.5 core complete all as specified and as directed.
Supply only Aluminium Lugs suitable for cable of size 95 sqmm x 3.5 core complete all as specified and as directed.
Supply only Aluminium Lugs suitable for cable of size 70 sqmm x 3.5 core complete all as specified and as directed.
Supply only Aluminium Lugs suitable for cable of size 50 sqmm x 3.5 core complete all as specified and as directed.
S&F offload change over switch AC -20 with side handle operation in sheet steel enclosure 415 Volt AC 50 Hz of capacity 400 Amp TPN complete all as specified and as directed. Make:- Cat part No IHBFFE0400 of Make Havells or equvivalent in make Indo Asian/HPL.
S&F offload change over switch AC -20 with side handle operation in sheet steel enclosure 415 Volt AC 50 Hz of capacity 200 Amp TPN complete all as specified and as directed. Make:- Cat part No IHBFFE0200 of Make Havells or equvivalent in make Indo Asian/HPL.
S&F onload change over switch AC -23 with side handle operation in sheet steel enclosure 415 Volt AC 50 Hz of capacity 100 Amp TPN complete all as specified and as directed. Make:- Cat part No IHBFFE0100 of Make Havells or equvivalent in make Indo Asian/HPL.
S&F onload change over switch AC -23 with side handle operation in sheet steel enclosure 415 Volt AC 50 Hz of capacity 32 Amp TPN complete all as specified and as directed. Make:- Cat part No IHBFFE0032 of Make Havells or equvivalent in make Indo Asian/HPL.
Supply and filling of coolant suitable for DG set of capacity 30 KVA to 320 KVA of make Kirlosker, Cummins, TATA as per recommendations of the manufacturer for DG sets complete all as specified and as directed.
M&L for attending, identifying and rectification of minor faults pertaining to DG sets and connected accessories/machinery, repairing/making serviceable on day to day complaint basis or as per requirement by providing a team of 01 No skilled Mechanic/skilled electrician and 01 No multi tasking staff/helper complete all as specified and as directed.
S&F in replacement Fuel indicating assembly complete of DG Set of capacity upto 320 KVA complete all as specified and as directed.
M&L as in replacement of fuel pipe line as per existing size and make suitable for 30 KVA to 320 KVA DG Set complete all as soecified and directed.
M&L as in replacement of maintenance free Battery 12 Volts, 180 AH (As per sample) complete all as specified and as directed. Make:- EXIDE, AMCO, SINETRAC, AMRON, LUMINUOUS.
S&F in replacement Battery charger 180-270 volt 50 Hz single phase AC current input and 12/24 volts 20 Amp DC output suitable to charge the batteries ranges from 60 Ah to 220 Ah, boost and float type with full charge cutoff mode complete with all protectionie short circuit, over load, reverse polarity, surge protection with voltmeter, ammeter, indication display complete all as specified and as directed. Make :-Sinetrac, model- 12-24BC 20A or equivalent to Elnix / Subtech.
Visit of the OEM Engineers for the rectification of any type fault pertaining to DG Sets and connected accessories/machineries ie. change of controller, sensor, thermostat, malfunction of harness wiring etc and making serviceable as per requirement complete all as specified and as directed. NOTE:- Spare/ parts shall be measured and paid seprately.
SONI ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .