8581/e8

Amount

Demolition of cement concrete in ground floor and paving nexc 15 cm thickness (below or above ground level) all as specified and directed.

Demolition of concrete unreinforced of any description and in any position not otherwise specifically provided for all as specified and directed

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for cement concrete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, including ashlar facings, dressed stone work and precast concrete articles all as specified and directed.

Taking down cement plaster of any description on stone walls including raking out joints, hacking for key, scrubbing down with water etc. all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed trusses all as specified and directed..

Dismantling posts or struts (wood, steel or R.C.C.) of any section, including taking out embedded portion and making good disturbed ground all as specified and directed.

Dismantling fencing wire mesh, of any type all as specified and directed.

Dismantling of 150 mm dia CI pipes jointed in cement mortar and taking out of trenches if required all as specified and directed.

Dismantling of 100 mm dia CI pipes jointed in cement mortar and taking out of trenches if required all as specified and directed.

Demolition and breaking up 150mm dia drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar all as specified and directed.

Excavation in trenches nexc 1.5m wide and nexc 1.5m depth for man holes and sewage lines etc nexc 10 sqm on plan and getting out in hard dense soil all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm in hard dense soil all as specified and directed.

Removing excavated material nexc 50 metre and depositing where directed at a level nexc 1.5m above the starting point in hard dense soil all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggragates) as in foundation filling and mass concrete all as specified and directed.

M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in coping including form work all as specified and directed.

M&L precast cement concrete 1:2:4 type B-1, (using 20 mm graded crushed stone aggregate) as in landing, cover slab (for manholes etc), chullah hoods, chajjas, water trough, mangers, shelves, and similar articles with plain faces all as specified and directed.

M&L prepolished chequered cement concrete tiles 25cm x 25cm/ 30cmx30 cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 20 mm thick screed bed or bedding layer CM 1:6 all as specified and directed

M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channel and drain all as specified and directed.

Extra for forming fair finished drain and channel 30 cm inner grith in cement concrete using extra cement in forms mould mitred/stopped ends all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30 cm all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in concrete bed to 150 mm dia drain pipes including packing under and haunching against the side of pipes after they are laid and tested all as specified and directed.

M&L PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in concrete bed to 100 mm dia drain pipes including packing under and haunching against the sides of pipe after they are laid and tested all as specified and directed.

M&L pre cast cement concrete 1:3:6 type C1 (using 20mm graded crushed stone aggregate ) for solid block masonary exceeding 10 cm thick and set in cement mortar 1:6 all as specified and directed..

All as per item No.25 here in before but except PCC bolcks

M&L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 all as specified and directed.

All as per item No.27 here in before but except stones

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface nexc 20 mm all as specified and directed.

M&L raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:4 all as specified and directed.

M&L hand packing (any thickness) at back of walls etc with broken stone or boulder and raising (or lowring) to the required level all as specified and directed.

M&L rendering 15 mm thick in CM 1:4 on brick or concrete surfaces finished surfaces even and smooth without using extra cement all as specified and directed.

M&L for preparing of newly plastered wall surfaces and applying three coats of white wash all as specified and directed..

M&L 150 mm dia CI pipes (sand cast) soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors all as specified and directed..

All as per item No 34 above but except pipe all as specified and directed.

M&L 100 mm dia CI pipes (sand cast) soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors all as specified and directed.

All as per item No 36 above but except pipes all as specified and directed.

S&F 150mm dia salt glazed stoneware drain pipes laid in trenches and jointed all as specified and directed.

S&F in repair 150mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor all as specified and directed.

S&F in repairs PVC (SWR) bends of any radius 110mm bore pipe including all as specified and directed.

S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed.

M&L deformed/twisted TMT MS bars 6 to 8mm dia, cut to length, bent to shape required including crancking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips in quality all as specified and directed.

Taking out water from septic tank by pumping/manually in foul condition and removing to out side MD land all as specified and directed.

Removing of sludge mixed with water nexc 150 metre and depositing where directed at a level nexc 1.5 metre above the starting point and burried in ground by digging, including RFR working in foul condition all as specified and directed.

Cleaning of existing sewage lines of any size by rodding with split bamboo or any other means as approved and removal of blockage including taking out existing RCC cover slabs of manholes of any size without damaging the slab covers to facilitate cleaning and replacing back in original position & cleaning debris/sludge in pipe line of any type all as specified and directed.

Cleaning of manhole of any size by removing of sludge mixed with water nexc 50 metre away from the point all as specified and directed.

Material and labour for cleaning of blockage manually by rodding, pumping, etc and removing the deposited sludge/solid/liquid material outside of MD land all as directed for water closet (Indian or European), trap & CI pipe line upto first manhole all as specified and directed.

All as per item No 49 here-in-before but for floor/nahni trap of kitchen/bathroom upto gully trap (excluding gully trap) all as specified and directed.

All as per item No 49 here-in-before but for Gully trap upto first manhole all as specified and directed..

S&F mild steel work as in post and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.and similar work conforming to Fe-290 Gde E-165 all as specified and directed.

Supply only chain link MS galvanised fencing,of any size or type all as specified and directed.

Fixing only chain link fencing including line wire, of any mesh, size and type to any type of standards, rails, straining bolts, etc including provission of binding wire. all as specified and directed.

S&F in repair for galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of atandred rails straining bolt including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc all as specified and directed..

M&L Mild steel screw bolts (machine made) 5mm to 10mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long each bolt all as specified and directed..

S&F for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc confirming to Fe 410 -W (Gde- E- 250) quality- A all as specified and directed.

M&L for preparing new steel surfaces of any description not otherwise described exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L mild steel round bars cut to length required including bending hooks/ends as directed by Engineer incharge or welding for overlaps as in ties for fencing etc., conforming to Grade-I IS-432 (Part-1) or Fe-410-W (Grade E-250) Quality 'A' or Fe-290 (Grede-E-165) all as specified and as directed

M&L for preparation of new steel surfaces of any description, nexc 10cm in width or girth when unconnected with other painting or when painted in a different tint all as specified and directed..

M&L for preparation of old decorated surfaces of walls and applying one coat of white wash all as specified and directed.

M&L for preparation of old decorated surfaces of walls and applying two coats of white wash all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling and applying one coat of white wash all as specified and directed.

M&L for preparation of old decorated surfaces of walls and applying one coat of cement base paint all as specified and directed.

M&L for preparation of old decorated surfaces of walls and applying one coat of colour wash all as specified and directed.

M&L for preparation of old decorated surfaces of walls and applying one coat of oil bound distemper all as specified and directed.

M&L for preparation of old decorated plastered surfaces and applying two coats of distemper oil emulsion on walls all as specified and directed..

M&L for preparation of surfaces of any description and applying one coat of exterior weather proof emulsion (Apex of Asian or equivalent) all as specified and directed.

M&L for preparation of old decorated wooden surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M&L for preparation of old wooden surfaces and applying two coats of synthetic enamel paint as specified and directed..

M&L for preparation of old steel surfaces and applying one coat of synthetic enamel paint all as specified and directed..

M&L for writing letter or figures (block, Roman, Italic or Indian) upto 150 mm height all as specified and directed.

Taking down of cement plaster on brick walls/stone wall including racking out joints, hacking for key, scrubbing down etc on walls including material & labour for rendering 15 mm thick in cement plaster on brick work or concrete surfaces in CM 1:6 finished surfaces even and smooth without using extra cement all as specified and directed

Taking down of cement plaster on brick walls/Stone Wall including racking out joints, hacking for key, scrubbing down etc on walls including material & labour for rendering 15 mm thick cement plaster on brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement all as specified and directed

M&L for preparation of newly plastered surface of walls and applying two coats of distemper oil emulsion all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of suitable primer all as specified and directed.

S&F PVC water tank cover of capacity 500/1000 litres all as specified and directed.

Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc.of capacity exc 250 but nexc 500 litres all as specified and directed.

Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc. capacity exc 500 but n exc 1000 litres all as specified and directed.

Jahori Singh Pokhriyal

JHURI PRASAD AND SONS