SPECIAL REPAIRS TO ROOF OF BLDG NO P-30 OF 91 INF BDE CAMP, SPECIAL REPAIRS TO BLDG NO P-379 AND P-384 OF GE(ARMY) TRIVANDRUM, PROVN OF PAVER BLOCK FLOORING NEAR BLGD NO P-494, AND PROVN OF EXHAUST FANS IN DIFFERENT LOCATIONS IN MH TRIVANDRUM AT PAN

Amount

Dismantling of single layer Mangalore pattern or similar tiles in roofing all as specified and directed

Dismantling wooden fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed

Dismantling of timber scantlings 40 Sqcm and over in section as in unframed work in any position complete all as specified and directed

M&L 2nd class HW clean sawn fillets/battens for tiles sectional area exc 6 and n exc 13 sqcm incl creosote oiling complete all as specified and directed

M&L 2nd class HW clean sawn fillets/battens for tiles sectional area exc 6 and n exc 13 sqcm except battens, any of the foregoing complete all as specified and directed

M&L timber framed and fixed second class Hard Wood in scantling, clean sawn complete all as specified and directed

M&L timber framed and fixed second class Hard Wood in scantling, clean sawn but except timber complete all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheeting, 0.50 mm thick, of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws or fixed with L or J type in lieu of screws complete all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheeting, as in ridges, hip, valey gutar etc, 0.50 mm thick, of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws or fixed with L or J type in lieu of screws complete all as specified and directed

S&F of mild steel section as in wind tie of size 40 mm width and 3 mm thick for roof incl securing bollts, all necessary drilling, bolting or riveting etc conforking to Fe 290 Gde E-165 complete all as specified and directed

Taking down cement plaster on brick or stone wall including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed

Rendering 15mm thick on fair faces of brick work or concrete surface in cement plaster 1:4. including preparing new plastered surface and applying two coats of Oil bond distemper over a coat of chalk whiting or primer complete all as specified and directed

M/L Preparing surfaces of wood and wood based materials,new or old of any description and gith and treated with creosote oil complete all as specified and directed

M&L for Brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed

M&L for rendering 15mm thick on fair faces of brick work or concrete surface inexternal surfaces, cement plaster 1:4. finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 10mm thick on fair faces of brick work or concrete surface on internal surfaces in cement plaster 1:6. finished even and smooth without using extra cement complete all as specified and directed

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and making good, cutting n exc 10 cm girth completed all as specified

M &L for providing cement concrete 1:2:4 type B1 (20 mm graded aggregate ) as in para pets and railings , bed plates upto 60 cm height incl necessary formwork complete all as specified and directed

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates. Fe 410-W (Gde-E-250) quality-A. IS 808 (Part I) - 1989 complete all as specified and directed

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of redoxide zinc chrome complete all as specified and directed

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

M&L for preparation of old painted wooden surfacesof any description and applying one coats of synthetic enamel paint complete all as specified and directed

M & L for prepartion of old surfaces of wall and applying one coats of acrylic exterior emulsion water proofing painting as per manufacturers instruction complete all as specified and directed.

S&F in repairs 150mm aluminum anodized barrel tower bolts of extruded section complete all as specified and directed

All as in item No. 24 here-ibefore above but for 125mm size

S&F in repairs 150 mm extruded aluminum alloy handle fabricated type anodized complete all as specified and directed

All as in item No.26 here-in-before but 125mm

S&F stainless steel butt hinges medium weight; 100mm size complete all as specified and directed

All as in item No.28 above but 75mm size.

M&L for surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed

M&L Plain cement concrete 1:3:6 Type C2 (using 40 mm graded stone aggregate) as in sub base in 100mm thick complete all as specified and directed

Sand filling/cushioning under floors or in foundations including watering and consolidation complete all as specified and directed

M&L for machine pressed precast concrete interlocking coloured paver block any shape and size confirming to IS 15658-2006 of 100mm thickness , M-50 Grade with grey cement and pigment complete all as specified and directed

M&L for PCC type B1 1:2:4 ( 20 mm graded aggregate in kerbs or mud stops rounded or chamfered edges complete all as specified and directed

M&L for removing excavated surplus soil removing from drainage to a distance not exeeding 50 m and dipositing where directed at a level not exeeding 1.5 m above the starting point complete all as specified and directed

Taking down carefully existing unserviceable point wiring any type (Light, fan, socket or power) with complete fittings, fixtures and pendant, regulator, switches, lamp holders, switch sockets etc. including making good to disturbed surface/concealed in wall/ceiling/floors etc by colouring with existing matching colour complete all as directed

Point wiring complete for One light point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multi-stranded, copper conductor FRLS grade cable of 1100 volts grade conforming to IS:694 drawn through and including non metalic rigid PVC FRLS conduit medium grade, ISI marked, 20mm/25mm bore with conduit accessories concealed on wall and ceiling/roof etc, with modular metal flush boxes 1.2 mm thick of suitable modules, concealed in walls with modular white plated cover 3mm thick as top cover fixed with screws for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade, multistranded single core green colour copper conductor for earth continuity connected to earth dolly complete all as directed NOTE: (a) Cost of modular metal flush boxes concealed in wall with suitable white cover plate for mounting switch/sockets, regulator, bell push, etc., shall be deemed to be included in the quoted rate (b) Cost of cutting chases & making good to disturbed surface with cement mortar, if required any shall be deemed to be included in the quoted rate. Make: Finolex or equivalent make of Plaza/Havells/Anchor/V-Guard/MESCab/RRKabel

S&F switch piano, flush type, single pole, one way 5 Amp, 240 volt, white or ivory ISI marked complete all as specified Make: Anchor/Havells/Legrand/Cona/Crabtree

S&F ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal complete all as specified Make: Anchor or equivalent make of Havells/Legrand/Cona/Crabtree/Indo asian

M&L for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, SPN 8 way, 240 volts grade with 200 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 54 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing suitable for fixing MCB SPN, SP etc, including taking down existing unserviceable one and removing from site complete all as specified and directed Make: Cat No. 811825 of IndoAsian or equivalent make of L&T/Legrand/Havells

S & F MCB single pole 5 to 32 Amps, 240 volt, 10 KA, C curve with IP-20 protected terminals including contact indication window for visual indication and safety of operator, IP-20 protection, energy limitation Class-3, airflow channels on both sides, bi-connect terminals etc., complete all as specified and directed Make: IndoAsian or equivalent make of L&T/Legrand/Schnider/C&S

All as per ser item No.41 above but for MCB SPN 25 to 32 Amps Make: IndoAsian or equivalent make of L&T/Legrand/Schnider/C&S

Supply and fix sub main wiring with 2 runs of 4 sqmm single core PVC insulated, FRLS, unsheathed cable with stranded copper conductor, 1100 Volts grade drawn through and including non metalic PVC conduit with all fitting such as Tee, Bends, Elbow, etc., fixed surface on wall/ceiling including 4 Sqmm multistranded PVC insulated, FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly complete. NOTE: Two runs of 4 sqmm copper cable and one run of 4 sq mm copper cable alongwith non metallic PVC conduit will be measured as one length Make: Plaza/Havells/Anchor/finolex/V-Guard/MESCab/RRCabel

M&L for Earthing complete in replacement with galvanised iron mild steel earth plate electrode 60 cm x 60 cm x 6.3mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below normal ground level, connected to glavanised earthwire 4mm diameter by means of GI Bolts, Nuts, check nuts and washers including earthing pit in PCC (1:3:6) type C-1 RCC pre-cast (1:2:4 type B-1) cover slab 50 mm thick with 8 mm CTD bars reinforcement both ways at 140 mm centre to centre with two handles, 20 mm dia GI pipe medium grade for watering pipe , wire mesh, funnel and providing charcoal or coke and salt in alternative layers of 15 cm and 15 mm dia light grade GI pipe for protection of earth wire from earth plate to MCB DB including necessary earth work in soft/loose soil, returning, refilling and removing of surplus soil to a distance not exceeding 50 mtr and testing on completion complete all as shown in electrical plate No-3 as specified and directed.

Supply and fixing surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver for and including 1 x 18/20 watt ultra bright LED with extruded aluminium body, tubelight 1200mm, 6500K etc including prewired with 3 core flexible cables with copper conductor from connector to light fittings & connecting up complete all as specified and directed. NOTE: LED tube light and LED batten fittings should be two different items. Make: Cat No. LTT8-20 (for tube rod) & DMLN1LT8-16 (for batten) of Cromptonn or equivalent make of Havells/Philips/Bajaj/Wipro

Supply & fixing Nexus+ pressure die-cast, roadway luminaries with excellent thermal management, epoxy powder coated sheet aluminium housing, with epoxy white powder coated CRCA sheet steel gear tray, clear acrylic cover as diffuser with IP66 protection and accessories, including supply and fixing LED security light 1x45 watt 6000K with fixing bracket made of 40mm bore galvanised iron light grade pipe made to shape, fixed on the wall through mild steel clamp, nuts,bolts & washers fixed to wall with all other fittings complete including connecting wire with 3 core flexible cables with copper conductor from ceiling rose to fitting complete and testing all as specified and directed. Make: Cat No. LSTP-45-CDL of Crompton or equivalent make of Havells/Philips/Bajaj/Wipro

Point wiring complete for one light point controlled by one switch and regulator with 1.5 sqmm PVC insulated unsheathed wiring cable with single core, multi-stranded, copper conductor in and including non metallic PVC casing and caping sheet 25mm (minimum size) on surface of wall with recessed, pressed steel terminal boxes not less than 1.2mm thick concealed etc , incl 3mm thick laminated sheet cover etc, including prov of 1.5Sqmm PVC insulated, FR, unsheathed, 1100 Volt grade, multi-stranded single core green colour copper conductor for earth continuity connected to common earth dolly all as specified and directed

Supply,install & testing exhaust fan, metal body 300mm sweep heavy duty, 240 volts, single phase, 900RPM complete fixed to wall with suitable MS bolts, grouted to wall and connecting up including provision of MS louver, cable from connected to fan with 3 core flexible cable of size 24/0.2mm with copper condutor from ceiling rose to exhuast fan including writing MES No of 2cm height with synthetic enamel black paint complete all as specidied and directed Make:Crompton/ Havells/ Bajaj / Almonard

Supply,install & testing exhaust fan, metal body 450mm sweep heavy duty, 240 volts, single phase, 900RPM complete fixed to wall with suitable MS bolts, grouted to wall and connecting up including provision of MS louver, cable from connected to fan with 3 core flexible cable of size 24/0.2mm with copper condutor from ceiling rose to exhuast fan including writing MES No of 2cm height with synthetic enamel black paint complete all as specidied and directed Make:Crompton/ Havells/ Bajaj / Almonard

Cutting holes into or through brick walls built in cement motor exc 400 sqcm but n.exc 0.10 sqm superficial area and making good to facings i.e. wall surface with the existing specification in cement mortar 1:3 to ends or edges or cement concrete 1:2:4 type B-1 for ventilating openings complete all as specified and directed at site

JEETH CONSTRUCTION

Ms Karthik Enterprice

AKASH CONSTRUCTIONS

M/S AARJAY ASSOCIATES

Shilpa Engineers and Contractors

DJ Group

K R JOSEPH AND SONS

KENZ CONSTRUCTIONS