Provison of Fire Fighting system at CHC building (Gplus1), Boden in the Dist of Nuapada.

Supplying, installing and commissioning of Diesel Engine driven stand by pump, horizontal centrifugal end suction backpull out radiator cooling type with gland packing and capable to deliver 1620 LPM (96 m³/ Hr) at 70 MWC with all necessary accessories like bronze impeller, stainless steel shaft,1800 RPM along with anti-vibration mounting, coupling, gear box, base plate for pump, fabricated mild steel channel with foundation bolts etc., It includes providing and fixing fuel oil tank (capacity as perTAC requirements) with supports and necessary pipe works for diesel engine, battery and battery charger to be connected to control panel of diesel engine and exhaust silencer including necessary pipe work and lagging, pump should have the dry run sensor provision, etc., and shall be automatic in operation with diesel engine control diesel engine control panel with 24V DC storage battery & its battery charger with required Ampere - hour rating, terminal box (2 nos. of 12volts), as per TAC including all associated electrical works. Make-Wilo/Kirloskar/KSB/Grundfoss

b) 4 core x 10 sqmm Aluminium conductor cable

c) 8 core x 2.5 sqmm Aluminium conductor cable

d) 2 core x 1.5 sqmm Aluminium conductor cable

e) 3 core x 6 sqmm Aluminium conductor cable

CABLE TRAY Supplying and fixing of perforated G.I.sheet cable tray with neccessory angle iron suspension supports, anchor fasteners etc. complete. Maximum height of suspension shall not exceed 500 mm.Size of the tray shall be suitable for laying the above mentioned cables.

G.I. Earthing strips of 50mm x 6mm thick, strip shall be run on floor / ceiling / walls from the equipment to the nearest Earth pit with necessory accessories as required.

S/F of Special Earthing complete with provision of 600x600x6mm thick GI plate along with 25x5mm GI strip in 40mm dia GI pipe including soldering of strip if necessary and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal and salt as required.

Supplying, installation testing and commissioning of the following-: ‘C’ class MS Pipe as per IS1239 for underground/over ground pipes with welded / flanged connection with saddles, supports (all with screwed/welded joints) as required including pipe of shorter lengths, tapering connecting pieces, short or long bends, specials like sockets, union nuts, elbows, reducers, plugs, Tees etc. Complete to make the system operative as required by LFA / TAC authorities the pipes will have to be laid and fixed in trenches. The work includes excavation in all types of soils and back filling, dewatering, etc., making holes in brick or RCC walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction of the client and painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for overheads pipes and providing and fixing pyp kote (corrosion protection tape) including supply and application of pipe coating and spiral Wrapping for underground piping (wrapping should have overlap of 15 to 20 mm) etc.Complete as per ASTM standards/IS: 10221 for corrosion protection of pipes for the underground installation.Note: The piping installation has to be put to hydraulic test to1.5 times the working pressure & as per latest applicable codes & standard before applying paint or pipe coating or wrapping etc. complete Make-Tata/Jindal/Sail. 200mm nominal dia

150mm nominal dia

80mm nominal dia

50mm nominal dia

25mm nominal dia

SITC of NRV conforming to IS 5312 (swing type) or to API 594/598 (dual plate check type) with CI body & brass trim part, PN 1.0 having necessary companion flanges, CS hardwares. Gaskets, arrow indicating direction of flow, etc. complete. It shall be ISI Marked and approved make.Make-Zoloto/Audco/Leader 200 mm nominal dia

150 mm nominal dia

100 mm nominal dia

80 mm nominal dia

Supply and installation, testing and commissioning of double flanged Isolation Sluice valves conforming to IS 14846 tested to ISI marked ,PN 1.6 with CI body, bonnet & brass trim parts, & having necessary companion flanges, bolts, nuts, gasket packing, support and any other spares, including indicator for open and shut position.Make-Zoloto/Audco/Leader Size : 200 mm (GEAR OPERATED)

Size : 150 mm

Size : 80 mm

Supply and installation, testing and commissioning of CI Butterfly valves ( control of each shaft) ) conforming to BS 5155 ,PN 1.6 tested to 1.5 times working pressure with necessary companion flanges, bolts, nuts, gasket packing and any other spares, including indicator for open and shut position as per fire practice etc complete.Make-Zoloto/Audco/Leader. 150mm nominal dia

100mm nominal dia

80 mm nominal dia

50mm nominal dia

Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type. Make-Zoloto/Audco/Leader. 25 mm nominal dia

Supply,Installation,Testing & Commissioning of Pressure Switch with cut-off bronze ball valves with integral strainer & flare nut (mixed ends) of suitable size with all accessories as per direction of Engineer-in-charge. Make- Danfoss/ Grundfoss/ Indfoss

Supply,Installation,Testing & Commissioning of Pressure gauge of 0-16 Kgf/sq.cm. range with cut-off bronze ball valves of suitable size with all accessories as per direction of Engineer-in-charge. Make- H.Guru/ G.Guru

Supply,Installation,Testing & Commissioning of Air vessel made of 250mm dia, 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia Gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint as required.

HYDRANT SYSTEM Supplying, installation testing and commissioning of the following-: ‘C’ class MS Pipe as per IS1239 for underground/over ground pipes with welded / flanged connection with saddles, supports (all with screwed/welded joints) as required including pipe of shorter lengths, tapering connecting pieces, short or long bends, specials like sockets, union nuts, elbows, reducers, plugs, Tees etc. Complete to make the system operative as required by LFA / TAC authorities the pipes will have to be laid and fixed in trenches. The work includes excavation in all types of soils and back filling, dewatering, etc., making holes in brick or RCC walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction of the client and painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for overheads pipes and providing and fixing pyp kote (corrosion protection tape) including supply and application of pipe coating and spiral Wrapping for underground piping (wrapping should have overlap of 15 to 20 mm) etc.Complete as per ASTM standards/IS: 10221 for corrosion protection of pipes for the underground installation.Note: The piping installation has to be put to hydraulic test to1.5 times the working pressure & as per latest applicable codes & standard before applying paint or pipe coating or wrapping etc. complete Make-Tata/Jindal/Sail. 150mm nominal dia

100mm nominal dia

80mm nominal dia

SITC of NRV conforming to IS 5312 (swing type) or to API 594/598 (dual plate check type) with CI body & brass trim part, PN 1.0 having necessary companion flanges, CS hardwares. Gaskets, arrow indicating direction of flow, etc. complete. It shall be ISI Marked and approved make.Make-Zoloto/Audco/Leader 150mm nominal dia

100 mm nominal dia

Supply and installation, testing and commissioning of CI Butterfly valves ( control of each shaft) ) conforming to BS 5155 ,PN 1.6 tested to 1.5 times working pressure with necessary companion flanges, bolts, nuts, gasket packing and any other spares, including indicator for open and shut position as per fire practice etc complete.Make-Zoloto/Audco/Leader. 150mm nominal dia

100mm nominal dia

Providing, fixing, testing & commissioning of Stainless steel single headed ISI marked oblique pattern hydrant landing valves with 80mm dia flanged inlet & 63 mm dia instantaneous type female outlet complete with stainless steel cap and GI chain, twist release type plugh and all accessories as per IS : 5290 -1993 (Type 'A') including fixing with anchor fasteners and flanged tapping from wet riser all complete as per specification & direction of EIC. (Make: -Minimax/ Newage/ Fireshield/ Safex)

Providing, fixing, testing & commissioning of 63 mm dia Instantaneous Pattern (male) Stainless Steel short size branch pipe with nozzle of 20 mm nominal bore outlet as per IS:903 : 1993 suitable to fit with standard instantaneous type 63mm dia coupling ISI marked (IS:903:1993) complete. (Make: Make-Minimax/Newage/Fireshield/Safex)

Providing supply & fixing of MS Hose Box for of suitable size(750 X 600 X 250mm) to accomodate 2 nos. of 15/ 1 no of 30 mtr long fire hose and a branch pipe, wall mounted type as per direction of Engineer-in-charge. Make- Minimax/ Newage/ Fireshield/ Safex

Providing, fixing, testing & commissioning of 15 m long non-perlocating, rubber reinforced lined fire hose pipe (as per IS : 636-1979, Type A) of 63 mm dia and length as described below. The hose shall be rated for brust pressure of 35.7 Kg/sqcm. Hose shall be complete with ISI marked SS male & female coupling (IS:903) bound & rivetted to hose pipe with copper rivets & 1.5 mm copper wire as per the instruction of EIC. (Internal fire hydrant) (Make: Make-Minimax/Newage/Fireshield/Safex)

Supply,Installation,Testing & Commissioning of Swinging pattern wall fixing first aid hose reel made from MS sheet and waterways and moving parts with rubber hose of 20 mm dia. and 30 mtrs. long with ABS(Plastic) shut-off nozzle as per IS: 444/IS: 12585 Type-I., complete with all accessories as per direction of Engineer-in-charge. Make- Minimax/ Newage/ Fireshield/ Safex

Providing, fitting & fixing of 4-Way GM fire brigade connection consisting of 63 mm dia instantaneous type male couplings with built-in check valves, 150mm dia flanged outlet complete with bolts, nuts and rubber insertions confirming to IS:904 with ISI mark including testing & commissioning the system etc. all complete as per apporoved specification & direction of EIC. Make-Zoloto/Audco/Leader

Providing & fixing of 25 mm size Gunmetal air Release Valve with isolation valve and all accessories conforming to IS3233:1965 as per direction of Engineer-in-charge. (Make-Zoloto/ Audco/ Leader) 25 mm

AUTOMATIC SPRINKLER SYSTEM Supplying, installation testing and commissioning of the following-: ‘C’ class MS Pipe as per IS1239 for underground/over ground pipes with welded / flanged connection with saddles, supports (all with screwed/welded joints) as required including pipe of shorter lengths, tapering connecting pieces, short or long bends, specials like sockets, union nuts, elbows, reducers, plugs, Tees etc. Complete to make the system operative as required by LFA / TAC authorities the pipes will have to be laid and fixed in trenches. The work includes excavation in all types of soils and back filling, dewatering, etc., making holes in brick or RCC walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction of the client and painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for overheads pipes and providing and fixing pyp kote (corrosion protection tape) including supply and application of pipe coating and spiral Wrapping for underground piping (wrapping should have overlap of 15 to 20 mm) etc.Complete as per ASTM standards/IS: 10221 for corrosion protection of pipes for the underground installation.Note: The piping installation has to be put to hydraulic test to1.5 times the working pressure & as per latest applicable codes & standard before applying paint or pipe coating or wrapping etc. complete Make-Tata/Jindal/Sail. 150mm nominal dia

100mm nominal dia

80mm nominal dia

65mm nominal dia

50mm nominal dia

40mm nominal dia

32mm nominal dia

25mm nominal dia

Supply and installation, testing and commissioning of CI Butterfly valves ( control of each shaft) ) conforming to BS 5155 ,PN 1.6 tested to 1.5 times working pressure with necessary companion flanges, bolts, nuts, gasket packing and any other spares, including indicator for open and shut position as per fire practice etc complete.Make-Zoloto/Audco/Leader. 100mm nominal dia

50mm nominal dia

Supply,Installation,Testing & Commissioning of Pendent/ Upright type Standrd Sprinkler with QB of 68 /79 deg. C temperature rating and 1/2" end connection confirming to IS: 15105 with ISI mark for all floors etc. all complete as per direction of Engineer-in-charge. Make- Tyco/ HD/ Viaking Pendent sprinkler

Sidewall sprinkler

SITC of standard response glass bulb type UL approved 79 degree rated brass concealed pendent sprinklers having 15 mm NPT connection with all accessories. Make- Tyco/ HD/ Viaking 5 mm glass bulb 79 deg. Side Wall Sprinkler

Supplying, installing, testing and commissioning of 150 mm hydralically operated Sprinkler control valve complete with water motor gong bell, basic trims as required, pressure gauges, pressure switch, drain valves, ball valves etc. complete. Alarm valve shall be UL Listed / FM approved.Make-Newage/HD/Honeywell 150mm dia.

Providing, laying, testing & commissioning of Flexible Sprinkler Hose Corrugated Unbraided type of length 1mtr for Fire Sprinklers, with 1'' Inlet Nipple BSPT,1/2" Outlet Reducer BSPT,0.7 m Square Supports Bar & Brackets(UL Listed) with all complete accessories as per direction of Engineer-in-charge. Make-Tyco/HD/Viaking

Supply,Installation,Testing & Commissioning of 25NB C. I. Sight glass with Gunmetal Ball Valve with CI hand wheel ISI Mark for all floors etc. all complete as per direction of Engineer-in-charge.

Providing and fixing of electric flow switch with mechanical time delay feature capable of sensing a minimum of flow of one sprinkler , including making electrical cable termination through input module & integrated with Fire Alarm System. Make-Honeywell/ eq.

AUTOMATIC FIRE DETECTION AND ALARM SYSTEM Supply, installing, testing and commissioning of of 2 Loop Network Panel Micro processor based 2 wire fault tolerant loop,with inbuilt network port (each loop accessing 99 or more detectors and 99 or more modules ) fire alarm/detection control panel. The Panel shall have 10000 or more event log history . Panel shall be capable of having 1600 or more configurable zones .The panel shall be able to give location of all fire/fault conditions of addressable units via the address codes. Further, the panel must be able to automatically switch ON /OFFrespective control module when ever any alarm is triggered. The panel shall have 7 Inch Touch Screen unit to indicate Fire/Fault Signal with address and analog output, external/inbuilt printer to log all fire or fault events complete in all respects.The Panel Shallbe Sheet Steel Painted, selaed to IP30. The Panel Shall have provision for 40 or more Zones with Individual LED Indicators expdable upto 200 Zones or higher. The panel shall have a built in power supply and battery charger along with maintenance free 7 AH, 2 x 12 volt SMF Lead acid batteries capable of running for a minimum of 48 hours with battery charger complete as required.and as per specifications. conforming to BS5839 Standards and Duly Approved by EN54 The panel shall support detection logics like coincidence & verification detections for the false alarm management. The Panel shall adjust the sensitivity between day and night to maintain the better detection/reponse time. The Panel shall be capabale of programming through PC ; Touch Screen of USB .This panel having facility of MODBUS protocol over TCP/IP for BMS integration.The panel should have provision for inbuilt RJ45 connection terminal for connecting to the LAN with inbuilt BACNET Protocol. Make- Make-Honeywell(MAX) /Siemens/Bosch/Edward/NOTIFIER/GST/Schneider 2 Loop Panel

Supplying, installing, testing and commissioning of OEM make ( 2 loop )Cloud based service through universal gateway, which shall be enabled through internet. Remote health monitoring solution shall utilize cloud-based software-as-a-service web application & supplementary network gateway hardware. System shall provide secure web access to cloud-based web application using any of the web browsers like Google Chrome (preferable), Internet Explorer etc. from any computer/ tablet/ smartphone connected over internet via defined credentials – username and password. It shall also have the facility to monitor the cloud service over the mobile apps. The cloud-based web application shall capture all fire alarm system data points as received from the system via supplementary gateway hardware of the same make as Fire Alarm Panel. The software shall display real time view of fire system effectiveness, multi-location unified view, custom dashboard, device level information, scheduled reporting, e-mail of critical alarms. The cloud service shall be capable of monitoring 250000 datapoints scattered across multiple install bases spread across multiple geographical locations. The Gateway Card shall be UL Listed.It should have 5 nos. or more user license. Internet/Wi-Fi Connectivity Required.The cost is inclusive of 2 years subscription charges.Software and panel shall be of same make.

Supply, Installation, Testing & commissioning of Addressable Manual Call Point soft addressable type with in built fault isolator as required. Make-Honeywell(MAX) /Siemens/Bosch/Edward/NOTIFIER/GST/Schneider

Supplying, installing, testing and commissioning of addressable Hooter at 85 dBA @ 3m for Audible annunciation and 75cd flashing at 1 Hz for visual indication with all accessories etc., complete. Make-Honeywell(MAX) /Siemens/Bosch/Edward/NOTIFIER/GST/Schneider

Supplying, installing, testing and commissioning of adressable multi sense smoke detector with inbuilt isolator module/isolator base,base, junction box and other accessories.Make-Honeywell(MAX) /Siemens/Bosch/Edward/NOTIFIER/GST/Schneider

FIRE EXTINGUISHERS FIRE EXTINGUISHERS :- Providing & fixing ABC type (Dry powder type ) extinguishers. Including all accessories as per IS specification (IS :15683) Consisting of welded MS cylindrical body with discharge hose ,discharge valve ,suspension brackets,initial filling etc. complete as required., initial filling etc complete as required. Capacity - 6 kg . Make : Fireshiled/ Kanex/ Safex/ ceasefire/Flameklog

Providing & fixing Water based Carbon-di-oxide 4.5 ltrs. fire extinguishers as per IS specification consisting of welded MS cylindrical body ,squeeze lever discharge valve fitted with internal discharge tube ,30 cm long high pressure discharge hose ,discharge nozzle,suspension brackets,finished exteranally with red enemel paint and fixed to wall with brackets with rawl plug/dash fastners complete with initial charging. Make : Fireshield/Kanex/ Safex/ ceasefire/Flameklog

SITC of 2 kg capacity Eco friendly stored pressure type filled with HFC 236(Clean agent fire extinguisher having zero ozone depletion potential) clean agent fire extinguisher s with safety seal,pressure gauge, controlable discharge mechanism helium leak detection tested and confirming to IS:15683 complete with initial charge as required. Make : Fireshield/Kanex/ Safex/ ceasefire/Flameklog

Supplying and installing at approved location approved make fire buckets at 24 gauge galvanized stseel sheet, standard 9 liters capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letter "FIRE" in black and gold. Cost shall be inclusive of Providing MS stand duly painted over a coat of primer (one stand shall be suitable for hanging 5 buckets.

SIGNAGES SIGNAGES: SITC flexyl of Photoluminescent based Glow-in-the-dark sheeting with luminious properties enclosed in a weather-proof UV stabilized film with UV screen printing by imported inks pasted over 3 mm Thick Cast Acrylic Sheet with the Protection of 3 mm Thick Cast Acrylic from Front side with stud type mirror screw with lifespan of 5 years, visible upto 4-6 hrs in total darkness for floor indication, fire exit, hydrant, hose reel, fire extinguisher, MCP, fire alarm panel, in case of fire, lift, alarm valve signages

SIGNAGES: SITC flexyl of Photoluminescent based Glow-in-the-dark sheeting with luminious properties enclosed in a weather-proof UV stabilized film with UV screen printing by imported inks pasted over 5 mm Thick Cast Acrylic Sheet with the Protection of 3 mm Thick Cast Acrylic from Front side with stud type mirror screw with lifespan of 5 years, visible upto 4-6 hrs in total darkness for fire evacuation plan, fire action(For all floors)

EMERGENCY EVACUATION SYSTEM/PUBLIC ADDRESS SYSTEM-Supplying, installing, testing and commissioning of 12 Watt wall mounted speakers with built in line matching transformer, grill flush mounting type in side the utility rooms.Make-Bosch/Bose/Honeywell.

Supplying, installing, testing and commissioning of Power amplifier of 480 watt.The amplifier should be clean reliable audio for public address amplification.Line input less than 1 volt, unbalanced& line output less than 1 volt unbalanced.Make-Honeywell/Bose/Bosch.

Supplying, installing, testing and commissioning 8 zone voice alarm controller with USB mp3 am/fm player included 8 zone button paging station and microphone.Make-Honeywell/Bose/Bosch.

Supplying, installing, testing and commissioning of 12 U Rack for amplifier, Controller & Microphone. Make-Valrack/Legrand/Netrack

Supplying, installing, testing and commissioning approved make PVC FRLS conduits on ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Bends etc.Make-AKG/Precision.25 mm dia.

1,00,000 LTR WATER SUMP:- CIVIL WORKS:- Const. of 100000 Ltr. Water sump. Earth work in excavation of foundation in hard soil within 50m lead and 1.5m lift including rough dressing and breaking clods to maximum 5cm. To 7cm. And laying in layers not exceeding 0.3m in depth and as per specification complete

Supplying filling foundataion & plinth with sand well watered & rammed with cost, conveyance, taxes royality etc. complete.

Cement concrete (1:3:6) with 4cm size hard granite metal including cost, conveyance,royality,taxes, watering and curing etc. complete.

Brick work with Fly Ash bricks having crusing strength not less than 75kg/cm^2 in cement motar (1:6) in F&P with cost,coveyance,royality watering&curing etc. complete

R.Cement concrete (M-20) with 12mm size hard granite chips including cost, conveyance,royality,taxes,watering and curing etc. complete. a) Raft

b)Wall

c) Slab

Cutting,bending,binding M.S Rod for R.C.C work including placing in position and cost of M.S.Rod & binding wire etc. cpomplete

Cement concrete (M-25) with 12mm size hard granite chips including cost, conveyance,royality,taxes, watering and curing etc. complete.

2.5 cm thick grading concrete (1:2:2) with 4.7mmsize hard granite chips including cost,conveyance,royality, taxes,watering& curing etc. complete

6mm thick cement plaster (1:4) over brick work with cst of all materials and all labour etc.

12mm thick cement plaster (1:4) over brick work with cst of all materials and all labour etc.

Cement Washing two coats over wall surface including cost of all materials and labour (T&P) etc. complete

Finishing walls with water proofing cement paint two coat including cost of cement with all labour T&P etc. complete.

STORAGE TANK OF 10,000 LTRS.;- Storage Tank of 10000 Lts. (Above the top Roof slab) R.Cement concrete (M-20) with 12mm size hard granite chips including cost, conveyance, royality,taxes,watering and curing etc. complete. a) Column + b) Beam

c) Bottom Slab

d) Wall (0.25mt Thick)

Cutting,bending,binding M.S Rod for R.C.C work including placing in position and cost of M.S.Rod & binding wire etc. complete.

12mm thick cement plaster (1:4) over brick work with cost of all materials and all labour etc. (puning & skirting).

Cement Washing two coats over wall surface including cost of all materials and labour (T&P) etc. complete

Finishing walls with water proofing cement paint two coat including cost of cement with all labour T&P etc. complete.

PUMP HOUSE:_ Construction of Pump House for fire Fighting system ofMCH Building Earth work in excavation of foundationin hard soil with in 50m lead and 1.5m lift including roughdressing and breaking clods to maximum 5cm. To 7cm laying inlayers not exceeding 0.3m in depth and as per specification complete.

Supplying filling foundation & Plinth with sand well watered & rammed with cost,conveyance,taxes royalty etc. Complete.

Cement concrete(1:3:6) with 4 cm size hard granite metal including cost,conveyance, royalty,taxes, watering and curing etc. Complete.

R.cement concrete(M-20) with 12 mm size hard granite chips including cost,conveyance,taxes,watering and curing etc. Complete. a) Column base

b)Plinth Beam

c)Column/Beam

d)Linte

e)Chajja

f)Roof Slab

g)Window Sill

Cutting,Bending,binding M.S rod for R.C.C work including placing in position and cost of M.S.Rod & binding wire etc. Complete.

Brick work with Fly ash bricks having crusing strenth not less than 75 Kg/cm^2 in cement mortar(1:6) in F&P with cost,conveyance,royalty.watering & curing etc. Complete.

Brick work with fly ash bricks having crusing strength not less than 75Kg/Cm^2 in cement mortar(1:6) in superstructure with cost,conveyance,royality,watering & curing etc.complete.

2.5 cm thick grading concrete (1:2:2) with 4.7 mm size hard granite chips including cost,conveyance,royality,taxes,watering 7 curing etc.complete.

16mm thick cement plaster(1:6) over brick work with cost of all materials and all labour etc.

12mm thick cement plaster(1:6) over brick work with cost of all materials and all labour etc.

6mm thick cement plaster(1:4)over brick work with cost of all materials and all labour etc.

2.5 cm A.S.flooring with cement concrete(1:2:4) including punning usingg 12mm size c.b.granite chips with cost conveyance,royality,watering & curing etc.complete

12mm thick cement plaster(1:4) over brick work with cost of all materials and all labour etc.

Providing of M.S.Door/Window/Grill gates made out of M.S Angle flat,sheet etc. Including cost,conveyance taxes etc.complete

Finishing walls with water proofing cement paint two coat including cost of cement paint & labour charges

Painting two coats over coat of primer to steel surface including cost of paint and primer with cost, conveyance,taxes etc. Complete

Please Enable Macros to View BoQ information