MW(cons)providing public amenities (booking counter, baby care room, drinking water, and toilet block) at Undavalli, Guntur Dist. for the year 2022-23

Amount

Earth work excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete as directed by the Engineer in-charge

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) including laying, curing etc complete as directed by the Engineer in-charge

Construction of Random rubble masonry with hard stone in foundation and with : Cement mortar 1:6 (1 cement : 6 coarse sand) including laying, curing etc complete as directed by the Engineer incharge

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)Including cost, conveyance of the materials, labour charges, fixing charges, GST and other applicable taxes etc. complete

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers etc Including cost, conveyance of the materials, labour charges, fixing charges, GST and other applicable taxes etc. Complete as directed by the Engineer in-charge

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing, cost, conveyance of the materials, labour charges, fixing charges, GST and other applicable taxes etc. Complete etc complete as directed by the Engineer in-charge.

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)Including cost, conveyance of the materials, labour charges, fixing charges, GST and other applicable taxes etc. complete as directed by the Engineer in-charge

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) Including cost, conveyance of the materials, labour charges, fixing charges, GST and other applicable taxes etc. Complete as directed by the Engineer in-charge

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)Including cost, conveyance of the materials, labour charges, fixing charges, GST and other applicable taxes etc. complete as directed by the Engineer in-charge

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers etc complete Including cost, conveyance of the materials, labour charges, fixing charges, GST and other applicable taxes etc. complete as directed by the Engineer in-charge

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level : Thermo-Mechanically Treated bars of grade Fe-500D or more as directed by the Engineer in-charge

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc as directed by the Engineer in-charge

Providing 20 mm cement plaster (2 coats in 12mm and 8mm) of mix : 1:4 (1 cement: 4 fine sand) including all material and labour charges etc complete as directed by the Engineer in-charge

Laying vitrified floor tiles including grouting the joints with white cement and matching pigments etc., complete

Providing and fixing dado/skirting of 10 mm thick acid and/or alkali resistant tiles of approved make and on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand), and filling of joints complete as per the direction of Engineer-in- Charge

Finishing walls with textured exterior paint of required shade for New work in Two or more coats including priming coat complete as per the direction of Engineer-in- Charge

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 100 mm nominal dia Pipes as per the direction of Engineer-in- Charge

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc 32 mm nominal dia Pipes as per the direction of Engineer-in- Charge

Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section, uPVC extruded glazing beads of appropriate dimension, G.I fasteners for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. complete as directed by the Engineer in charge of work.

Cost, supply and fixing of prefabricated WPC Door with frame Including cost, conveyance of the materials, labour charges, fixing charges, GST and other applicable taxes etc. complete

Electrification system in the toilet block and Ticket Counter complete item of work as directed by the site in-charge (Please refer Annexure-A)

Cost, supply and fixing of Sanitary & Plumbing items including cost, conveyance of all materials, labour charges, laying and fixing in position charges etc. complete item of work as directed by the site in-charge (Please refer Annexure-B)

T NARASIMHULU NAIDU

CHINTHADA VENKATA RAO