ADDN/ ALTN/ IMPROVEMENT TO CERTAIN MAP DUs (OMQs/ SMQs) AT DARJIPURA AT AF STATION VADODARA

Amount

Taking down chowkats or frames exceeding 1.5 sqm and not exceeding 4 sqm each with shutters (without taking off shutter from the frame) complete all as specified and as directed.

Taking down chowkats or frames not exceeding 1.5 sqm each (without taking off shutter from the frame) complete all as specified and as directed.

Taking down shutters only of any description not exceeding 1 sqm each complete all as specified and as directed.

Taking down shutters only of any description exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and as directed.

Supply and fix powder coated aluminium work for doors, windows and ventilators and partition walls with one or more rebates fixed in position as per manufacturer's instruction including necessary joining cleat, glazing clips, rubber packing, beading, plaster work on edges during fixing (if required) etc. complete all as specified and as directed.

Supply and fix 4mm thick sheet glass, ordinary quality and glazing with glazing clip and powder coated aluminium beading in square not exceeding 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix stainless steel wire cloth 0.36 mm nominal dia wire and average width of aperture 1.40 mm and fixed with powder coated aluminium beading/ wood beading complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed.

Material and labour for non-skid ceramic colored tiles 7 to 8 mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

All as per item no. 9 above but on vertical surfaces such as dado/ skirting complete all as specified and as directed.

Material and labour for non-skid ceramic colored tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles in vertical surfaces of size 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material and labour for 15 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and as directed.

Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive tiles etc. on vertical surfaces of walls complete all as specified and as directed.

Demolition of stone slabs and tiles of any description, laid bedded and pointed in any mortar complete all as specified and as directed.

Material and labour for 20 mm thick granite slab with fully rounded edges on front face, fixed with adhesive or laid in neat cement slurry over and including 15 mm thick screed bed in CM 1:6 including cutting space for sink and gas pipe hole complete all as specified and as directed.

Material and labour for machine cut kota stone slab flooring 20-25 mm thick including polishing over and including15 mm thick cement screed base in CM 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab in single piece as in window cill, stairscase etc. complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone wall/ celling including raking out joints, hacking for key scrubbing down with water etc. complete all as specified and as directed.

Material and labour for 10 mm thick rendering in CM 1:6 on concrete surfaces/ fair faces of brick masonary wall, finished even and smooth with thin layer of sagol complete all as specified and as directed.

Material and labour for 15 mm thick rendering in two layer of 10 mm thick backing coat in CM 1:6 and finishing coat 5 mm in CM 1:4 using water proofing compound on faces of brick masonry wall, finished even and fair etc. complete all as specified and as directed.

Material and labour for rendering 5 mm thick on concrete surfaces of ceiling in CM 1:3 finishing the surface fair and even complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of exterior emulsion paint over and including one coat of primer complete all as specified and as directed.

Material and labour for preparation of newly plastered or unplastered surfaces of wall rubbing down and applying two coats of oil bound distemper (any tint/ shade as approved by GE) over application of chalk whitening complete all as specified and as directed.

Material and labour for preparation of new plaster wall surface and applying three coats of white wash on ceiling surfaces complete all as specified and as directed.

Material and labour for complete removal of existing treatment and applying two coats of exterior acrylic emulsion over and including one coat of primer including preparation of surfaces complete all as specified and as directed.

Material and labour for applying one coat of exterior acrylic emulsion including preparation of surfaces complete all as specified and as directed.

Material and labour for complete removal of existing treatment and applying two coats of oil bound distemper (any tint/ shade as approved by GE) over application of chalk whitening complete all as specified and as directed.

Material and labour for applying one coat of oil bound distemper (any tint/ shade as approved by GE) complete all as specified and as directed.

Material and labour for preparation of old surfaces and applying 3mm thick JK/ Birla Cement putty on wall/ ceiling and finished complete all as specified and as directed.

Material and labour for complete removal of existing treatment of wall and applying three coats of white wash complete all as specified and as directed.

Material and labour for complete removal of existing treatment and applying three coats of white wash on ceiling complete all as specified and as directed.

Material and labour for filling surface cracks not exceeding 5 mm to 7 mm wide with "Dr fixit crack X powder" or equivalent polymer molified cracks filler all as per manufacturer instructions complete all as specified and as directed.

Material and labour for 35 mm thick 2nd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass, gauze etc. (without sash bar), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing, glass etc., size of member of shutter as specified in SSR Part-I section 8,clause 8.24(a) supplied and fitted to chowkats complete all as specified and as directed.

Material and labour for factory made flush shutters 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Material and labour for factory made flush shutters 25 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides as in CB shutter complete all as specified and as directed.

Resecuring or easing and adjusting without taking down shutter of any description exceeding 1 sqm and not exceeding 2 sqm complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and drawings complete all as specified and as directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rail; M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawings complete all as specified and as directed.

Supply and fix 75 mm long SS butt hinges, fixed to frame with screws or welding complete all as specified and as directed.

Supply and fix 200 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix aluminium alloy anodized sliding door bolt of length 300 mm, with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections or cast aluminium alloy complete all as specified and as directed.

Supply and fix 150 mm long aluminium handle, cast type, anodized complete all as specified and as directed.

Supply and fix hasp and staple, 150 mm size, safety type, aluminium anodized including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Supply and fix door stopper of 150 mm size (ISI Marked), aluminum alloy body and tongue double legged anodized with hard drawn steel spring over all length of cover plate fixed in floor complete all as specified and as directed.

Material and labour for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Supply and fix in repair 25 mm dia stainless steel curtain drapery rod, decorative type, cut to length and fixed complete all as specified and as directed.

Supply and fix bracket suitable for 25 mm dia stainless steel, decorative type curtain rod with steel screw/ wooden screw complete all as specified and as directed.

Taking up or down steel tubing/ UPVC pipes/ PPR pipes of 15 mm bore pipe and connections including cleaning for refixing complete all as specified and as directed.

Taking up or down steel tubing/ UPVC pipes/ PPR pipes of 20 mm bore pipe and connections including cleaning for refixing complete all as specified and as directed.

Supply and laying in trenches/ fixing in walls, 15 mm dia GI tubes ‘medium grade’, ISI marked, galvanized and fixed to walls and ceiling or laid in floors with all fittings such as tees, bends, elbows, GI clamp for supporting the pipe on wall and connecting to existing water main complete all as specified and as directed.

Fixing only 15 mm dia tubes ‘medium grade’ to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and laying in trenches/ fixing in walls, 20 mm dia GI tubes ‘medium grade’, ISI marked, galvanized and fixed to walls and ceiling or laid in floors with all fittings such as tees, bends, elbows, GI clamp for supporting the pipe on wall and connecting to existing water main complete all as specified and as directed.

Fixing only 20 mm dia tubes ‘medium grade’ to walls and ceiling or laid in floors complete all as specified and as directed.

Dismantling water tanks not exceeding 500 litre capacity complete all as specified and as directed.

Supply and fix 500 Litre rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Supply and fix 20 mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.

Supply and fix in repair vitreous china wash hand basin, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed.

Supply and fix in repair vitreous china squatting pan, orissa pattern of size 580x440mm, white with integral foot rest including connection to trap and flushing pipe complete all as specified and as directed.

Supply and fix in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) complete all as specified and as directed.

Supply and fix in repair plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated hinged device complete all as specified and as directed.

Supply and fix in repair 10 litres capacity PVC valveless syphonic action type flushing cistern, low level, white, with inlet, ball valve, float handle including brackets complete all as specified and as directed.

Supply and fix 32 mm brass chromium plated waste coupling for wash hand basin complete all as specified and as directed.

Supply and fix in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15 mm bore pipe complete all as specified and as directed.

Supply and fix in repair bib taps, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15 mm bore pipe complete all as specified and as directed.

Supply and fix in repair stop valves, cast copper alloy, screwed down, high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed to15 mm bore pipe complete all as specified and as directed.

Supply and fix in repair 32/ 40 mm PVC waste pipe for wash hand basin complete all as specified and as directed.

Supply and fix PVC connection 15 mm size with PTMT nuts of length 60 cm complete all as specified and as directed.

Supply and fix brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges, fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and as directed.

Supply and fix brass chromium plated soap dish, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

Demolition of cement concrete, unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for providing cement concrete type B0, 1:2:4 using 12.5 mm graded aggregate laid to slope 1:30 in padding for WPT over roof slab, filling of pressed steel door frame complete all as specified and as directed.

Material and labour for providing cement concrete type B0, 1:2:4 using 12.5 mm graded aggregate in cover fillet of 75 mm radius at junction of roof slab and parapet wall etc. complete all as specified and as directed.

Material and labour for removal of existing unserviceable water proofing treatment including taking down cement plaster etc., of any description and cleaning of top surface of cement concrete, flushing out junction of parapet walls and washing down with water to remove all dirt etc. including preparation of surfaces to receive new treatment and removing the rubbish off premises complete all as specified and as directed.

Material and labour for applying cold bituminous primer @ 0.30 Ltr/sqm conforming to IS-3384 and laying APP polymer modified membrane 3 mm thick 3 Kg/Sqm in weight with non-woven polyster reinforcement with plain finish and sealing all overlaps of 75 mm in length side and 75 mm on width side of membrane by torching the same as per manufacturer instruction and all as per specified in particular specifications including application of solar reflective aluminum paint complete all as specified and as directed. Make: STP/ Pidilite/ Tikitar Notes:- (a) Rate quoted shall be deemed to be inclusive of cleaning of surface to be treated properly to recieve the primer. (b) Necessary guarantee certificate shall be obtained from the manufacturer for the material for 10 years from the date of completion of work. (c) APP membrane treatment shall be done firstly at corners and junction of parapet wall 30cm on verticle position and 30cm on horizontal position, work shall be done with proper attention and work carried out by authorised applicator only. Main portion of roof treatment shall be commenced only on completion of corners/ edges/ junctions. (d) APP membrane shall be taken upto outside of the parapet wall to an extent of 150mm minimum. (e) Ensure while laying the treatment no bulging on surface/ voids shall be found and proper care/ attention be given for the treatment. (f) If any work executed at site without any authorised applicator, the same shall be rejected and no payment shall be made. (g) Contractor shall produce the certificate from the manufacture for the authorised applicator before commencement of work.

Material and labour for 10 mm thick screed bed in CM 1:4 mixed with water proofing compound 3% by weight of cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately under respective item of the schedule.

Supply only intergral water proofing compound complete all as specified and as directed.

Demolition of brick and stone wall built in cement mortar including all quoins, arches, pillars,etc. complete all as specified and as directed.

Material and labour for brick work, using sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and as directed.

Material and labour for special treatment to sunken portion (including necessary dismantling of tiles and PCC along with required PCC at site of mix 1:2:4 of required thickness) with 10 mm thick plaster in CM 1:4 with WPC liquid Conplast 421 and applying one coat each of Nitroproof 100 and Nitroproof 120 on plastered surface. Rendering 10 mm thick in CM 1:4 mixed with Conplast 421 in sunken portion of WC and CI pipe joint shall be filled and shall include filling of lean concrete 1:5:10 complete all as specified and as directed.

Material and labour for dismantling of CI drain pipes 75/ 100 mm internal dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

Supply and fix CI spun pipes, soil waste vent and rain water pipe 75 mm bore (ISI marked) in any length with or without ears with cement joint laid in/ fixed to wall complete all as specified and as directed.

Supply and fix CI spun pipes, soil waste vent and rain water pipe 100 mm bore (ISI marked) in any length with or without ears with cement joint laid in/ fixed to wall complete all as specified and as directed.

Supply and fix in repair cast iron floor trap 75 mm outlet dia with grating including jointing to waste pipe fixed in cement concrete type B1, (1:2:4) complete all as specified and directed.

Supply and fix 100 mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

Supply and fix 75 mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

Supply and fix 100 mm bore bend (any radius) with duck foot or heel rest complete all as specified and as directed.

Supply and fix 75 mm bore bend (any radius) with duck foot or heel rest complete all as specified and as directed.

Material and labour for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

Material and labour for preparation of new steel and iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc. complete all as specified and as directed.

Material and labour for pressed steel frames (105 X 60 mm) for doors with one or more rebates including necessary fixing of lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

Material and labour for pressed steel frames (125 X 60 mm) for doors with one or more rebates including necessary fixing of lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

Supply and fix in repair chromium plated shower rose of 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

Material and labour for providing and injecting chemical emulsion along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

Material and labour for treatment of soil at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same

Material and labour for treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.

Material and labour for providing 75 mm thick cement concrete, 1:3:6 mix, type C2 using (40mm graded crushed stone aggregate) as in plinth protection, finished surface without using extra cement complete all as specified and as directed.

Material and labour for mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.

Material and labour for mild steel framed work (Fe 290 gde E 165) as in doors or gates of angle, desert cooler stand or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

Supply and fix mild steel anchor fastener 15 cm long and 10 mm dia incuding one nut and washer fixing for MS cooler stand in wall including drilling and fixing complete all as specified and as directed.

Supply and fix SS plate rack 1 mm thick of size 31"x36"x10" Make: Code No 1049 Swasti Nirali or equivalent as spcified in Appx B complete all as specified and as directed.

Supply and fix in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Demolition and breaking up 150 mm dia drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 10 sqm on plan and not exceeding 1.5 metre depth and getting out in soft/ loose soil for foundations or for shafts, wells, cesspits, manholes, pier holes, laying of sewer pipe etc. complete all as specified and as directed.

Material and labour for beding to drain pipes including packing under, and haunching in PCC 1:3:6, type C2 using 40 mm graded aggregate against the side of 150 mm bore SWG/ NP2 pipes after they are laid and tested for complete all as specified and as directed.

Material and labour for 150 mm bore salt glazed stoneware pipe, laid and jointed complete with collars complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Material and labour for providing plain cement concrete 1:4:8, type D-2 (using 40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

Material and labour for providing precast cement concrete 1:2:4, type B-1 (using 20mm graded aggregate) set in cement mortar 1:4, as in cover slab supported on wall complete all as specified and as directed.

Material and labour for rendering 15mm thick cement plaster on fair faces of concrete surfaces in CM 1:4 complete all as specified and as directed.

Material and labour for MS TMT bars 6 to 8 mm dia cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia etc. complete all as specified and as directed.

Material and labour for plain cement concrete type B1, 1:2:4 (20mm graded aggregate) as in coping complete all as specified and as directed.

Material and labour for cement concrete (1:2:4), type B-2 (using 40mm graded aggregate) in surface channel and drain including forming fair finished channel and benching of manhole including finishing the top of benching even and smooth using extra cement complete all as specified and as directed.

Material and labour for salt-glazed stoneware gully traps 150 x 150 mm, square or round mouthed, type 'P' complete all as specified and as directed.

Supply and fix in repair 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ floor complete all as specified and as directed.

Supply and fix in repair 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ floor complete all as specified and as directed.

Supply and fix 110 mm dia PVC (SWR) bends any length any type complete all as specified and as directed.

Supply and fix 75 mm dia PVC (SWR) bends any length any type complete all as specified and as directed.

Supply and fix 110mm PVC (SWR) branch piece double (double Y) equal or unequal complete all as specified and as directed.

Taking down carefully point wiring including (light, fan, socket or power and complete fittings such as switches, ceiling roses, pendant holders, batten holders, shades, conical fan regulators, light or power sockets etc.) removing materials from site and making good disturbed surfaces of walls, roofs etc. complete all as specified and as directed.

Material and labour for point wiring complete as specified with 1100 volt grade 1.5 sqmm. (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor drawn through and including rigid non-metallic PVC concealed conduit of suitable size not less than 20 mm dia, with all fittings, concealed in wall/ roof/ floor including decorative modular cover plates (inner and outer) suitable for housing modular pattern switches/ sockets/ regulators etc. along with necessary metal boxes flush mounting in the wall duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified and directed for one light point controlled by one one/way switch.

All as per item No.125 above but for one fan/ exhaust fan point controlled by one one way switch.

All as per item No.125 above but for one 3 pin 5 Amps socket outlet on same board with other switch.

All as per item No.125 above but for one 3 pin 5 Amps socket outlet on independent board with other switch.

All as per item No.125 above but for one bell point controlled by one bell push.

All as per item No.125 above but for one light point controlled by two, two way switch.

All as per item No.125 above but wiring with 2.5 sqmm multistranded copper conductor unsheathed and 2.5 sqmm copper conductor unsheathed cable as earth continuity conductor for one 5 pin 15 Amps power socket outlet point on independent board complete all as specified and as directed. Note for item no, 125 to 131:- (i) Fittings and fixtures such as switches/ sockets/ ceiling rose and the like shall be measured and paid separately under respective item of BOQ. (ii) Cost of cutting chases in wall and making good disturbed surfaces as per existing deemed to be included in quoted rate.

Material and labour for concealed sub main wiring using two runs of single core 6 sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade, ISI marked complete with concealed PVC conduit of size not less than 20 mm dia and accessories like bends, tees etc. and PVC insulated copper cable 6 sqmm for earth wire and connecting to earth dolly including taking down old unservicable submain wiring complete all as specified and as directed. Note:- (i) Two runs of 6 Sqm and one run of 6 Sqm cable and one run of PVC conduit shall be measured as one unit. (ii) Necessary plastering in the disturbed surface of wall and distempering/ white washing to match the existing colour shall deemed to be included in the unit rate quoted.

Material and labour for concealed sub main wiring using two runs of single core 4 sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade, ISI marked complete with PVC conduit accessories like bends, tees etc. and PVC insulated copper cable 4 sqmm for earth wire and connecting to earth dolly complete all as specified and as directed. Note:- (i) Two runs of 4 Sqm and one run of 4 Sqm cable and one run of PVC conduit shall be measured as one RM. (ii) Necessary plastering in the disturbed surface of wall and distempering/ white washing to make the existing colour shall deemed to be included in the unit rate quoted.

Supply and fix modular switch one way, 6A, one module complete all as specified and as directed.

Supply and fix modular switch one way 16A, one module complete all as specified and as directed.

Supply and fix modular bell push, 6A, one module complete all as specified and as directed.

Supply and fix modular switch, two way, 6A, one module complete all as specified and as directed.

Supply and fix socket, 6A, 2/3 pin combined two module complete all as specified and as directed.

Supply and fix socket 6A/ 16A, 2/3 pin combined two module complete all as specified and as directed.

Supply and fix ceiling rose surface bakelite three terminal, 65 x 50 mm, 250/230 volts, ISI marked complete all as specified and as directed.

Supply and fix fan regulator, 120W, two module complete all as specified and as directed.

Supply and fix in repair DB's sheet metal enclosure, double door for SPN DB 12 way type, 240 volts and 200 Amp rating bus bar complete all as specified and as directed.

Supply and fix in repair MCB SP, upto 32 Amp, 240 volts, C series complete all as specified and as directed.

Supply and fix in repair MCB SPN, upto 63 Amp, 240 volts, C series complete all as specified and as directed.

Supply and fix in repair MCCB 4 pole, 100 Amp, 415 volts, 16 KA thermal release complete all as specified and as directed.

Supply and fix exhaust fan, steel body, heavy duty, turboforce, AC single phase 230 V of 300 mm sweep, 1400 RPM, air delivery 1950 CFM with 4 blades, and frame and louvers gray colour, dust resistant etc. complete all as specified and as directed. Note: All necessary arrangements such as wooden frame/ making hole/ making good the disturbed surfaces or wall shall be deemed to be included in quoted rates.

Supply and fix in replacement LED battens 4 feet, 20 Watt with polycarbonate housing and diffuser AC 220-240 volts, 50 Hz, CRI 80, efficiency 120 Lumens per Watt, Color temp 4000K, Natural white, powerfactor greater then 0.90, IP 20 and connecting with copper conductor flexible cable from ceiling rose to connector of the light and fixing the same complete all as specified and as directed.

Supply and fix wall mounted light fitting suitable for retrofit LED lamp upto 14 Watt with 14 Watt white LED bulb, B22 champagne gold finish fixture with plastic body, opal white PC diffuser for glare free light complete all as specified and as directed.

Supply and fix LED security light luminaire 35 Watt, pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribution complete with all accessories internally pre-wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete all as specified and as directed.

Supply and fix HYGROW stainless steel 450 mm connection pipe, 15 mm dia, with nuts (HYGROW) for geyser complete all as specified and as directed.

Supply and fix bracket for security light made up of 25 mm dia, 1.0 metre long GI pipe, light grade, bent to required length, fixed to wall with 2 clamps made of 20x3 mm mild steel flat minimum 15 cm long, 4 No.s 8 mm dia bolts with nut complete including taking down old unserviceable brackets complete all as specified and as directed.

Supply and fix in replacement exhaust fan louvers for 300 mm sweep complete all as specified and as directed.

Supply and fix bell ding dong type, AC, 230 Volt, heavy duty complete all as specified and as directed.

Supply and fix white cover plate with frame, one module with brass screw and washers with necessary slots required for mounting the fixtures complete all as specified and as directed.

Supply and fix white cover plate with frame, two module with brass screw and washers with necessary slots required for mounting the fixtures complete all as specified and as directed.

Supply and fix white cover plate with frame, three module with brass screw and washers with necessary slots required for mounting the fixtures complete all as specified and as directed.

Supply and fix white cover plate with frame, four module with brass screw and washers with necessary slots required for mounting the fixtures complete all as specified and as directed.

Supply and fix white cover plate with frame, eight module with brass screw and washers with necessary slots required for mounting the fixtures complete all as specified and as directed.

Supply and fix metal flush box one/ two module with brass screw and washers for mounting the fixtures including taking out the old box and making good disturbed suface after fixing the board complete all as specified and as directed.

Supply and fix metal flush box three module with brass screw and washers for mounting the fixtures including taking out the old box and making good didturbed suface after fixing the board complete all as specified and as directed.

Supply and fix metal flush box four module with brass screw and washers for mounting the fixtures including taking out the old box and making good didturbed suface after fixing the board complete all as specified and as directed.

Supply and fix metal flush box 6/8 module with brass screw and washers for mounting the fixtures including taking out the old box and making good didturbed suface after fixing the board complete all as specified and as directed.

Material and labour for dismantling and refixing of geyser of 25 Ltr capacity or exhaust fan in same location after carrying out internal civil work including anchor hold fastener complete all as specified and as directed.

Supply and fix smart single phase four wire energy meter BIS 16444:2015 (reaffirmed 2020) marked in existing meter board/ floor panels having current range 10-60 Amp, 240 Volt accuracy class 1.0 complete all as specified and as directed.

Supply and fix 20 Amp industrial metal clad plug in socket and plug top with 20 Amp SP MCB complete all as specified and as directed.

Supply and fix PVC blanking plate complete all as specified as directed.

Material and labour for TV socket with modular plate for TV connection complete all as specified and as directed.

Material and labour for dismantling tube light fittings, 20 Watt for carrying out internal civil work including screw and clamp and keeping in safe custody for refixing complete all as specified and as directed.

Fixing only tube light fittings 20 Watt after carrying out internal civil work including screw and clamp complete all as specified and as directed.

Supply and fix in replacement of thermostat immersion point type 15 Amps, 230-250 volts/ AC, ISI marked complete all as specified and as directed.

Supply and fix brass/ copper tank 25 Ltr capacity for geysers including glass wool complete all as specified and as directed.

Supply and fix in replacement indicator lamp assembly for geyser complete all as specified and as directed.

Supply and fix in replacement syphon assembly suitable for 25/ 50 Ltr geyser complete including nuts and washers complete all as specified and as directed.

Supply and fix in replacement geyser heating element 1.5/ 2 KW triangular/ round type 230 volts including nuts, washers etc. complete all as specified and as directed.

Supply and fix ceiling fans complete with blades, down rods, electronic regulator (remote controlled) and accessories, 230 V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) complete along with removal of old unserviceable fan complete all as specified and as directed.

Material and labour for rewinding of exhaust fan 300 mm sweep, strip opening and removal of burnt winding wire, rewinding the fans with suitable size of heavy grade (ISI marked) copper winding wire, duly providing leathoride sheets, cotton tape, insulation sleeves, varnish, etc., complete including taking down, shifting/ transporting to workshop, reassembling, refixing at site and including testing complete all as specified and as directed. Note:- Contractor shall make the suitable arrangement at MES ( Darjipura) premises for replacing of accessories, testing upto the satisfactory level in front of Engnr-in-charge without fail.

Material and labour for earthing complete as per electrical plate No.3 of MES SSR Part I with galvanised steel plate earth electrode 600 mm x 600 mm x 6 mm buried directly in ground in a pit of depth not less than 2.25 metre below ground level with the top edge of earth plate at a depth not less than 1.5 m below normal ground level, connected to and including galvanised iron or steel earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, earthing wire protected by galvanised iron or steel pipe 15 mm dia light grade and connected to main switch board or main control board, watering pipe 20 mm dia GI pipe medium grade including excavation and earth work in any type of soil, PCC pit, CI frame, RCC covers complete all as specified and as directed.

Material and labour for providing cement concrete type B0, 1:2:4 using 12.5 mm graded aggregate in floor kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

Taking up or down unservicable steel tubing/ UPVC/ PP-R and connections of dia 25 mm complete all as specified and as directed.

Supply and laying in trenches/ walls 25 mm GI tubing, medium grade, ISI marked with GI fitting such as tees, bends, elbows ,GI clamp for supporting the pipe on wall and connecting to existing water main complete all as specified and directed.

Supply and fix 25 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed .

Supply and fix 15 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed .

Supply and fix HDPE coupler of 63 mm dia to connect 25 mm GI pipe to the MD accomodation complete all as specified and directed.

Supply and fix 15mm bib tap standard of PTMT (Minimum weight 15mm-90gms), any colour, high pressure, screwed for iron pipe and fixed complete all as specified and directed.

NOTE: Amount of credit of Rs. 11,08,464.00 for retrieved materials is mentioned in schedule of credit on Srl Page No. 29 of tender documents in pdf form which will be deducted offline while acceptance of tender.

M/s SK Traders

SHELDON CONSTRUCTION

SLB Enterprises

vijay infraprojects pvt ltd

Vijay Construction Co

JAMNAGAR ELECTRIC AND MACHINERY CO

Parth Infrastructure Pvt. Ltd.

DARSHAN CONSTRUCTION Co.