Providing, installation testing and Commissioning of split type Air Conditioning system in different rooms of PWD, 1st floor, Block-7, Secretariat Building, Agartala

Amount

Providing star rated ( Minimum 3 star with applicable ISEER according to current industry standard ) split type high wall AC machine (Condenser & evaporator coil pipe should be made of copper) of approved make and technical specification with hermetically sealed compressor operating on non CFC refrigerant, pipe as supplied with AC machine, necessary plug top for IDU (with 01 year overall machine and compressor warranty) suitable for wall mounting conforming to IS (Part-II) specification ( Except power consumption) suitable for operation on 230 volt, 50Hz, single phase AC supply capable of performing a) Cooling b) Dehumidifying c) Air circulating d) Filtering having rated cooling capacity.

2.0 TR split type high wall AC machine (rated cooling capacity should not be less than 6000 Kcal/hr or 24000 Bthu/hr or 7000 watt)

Standard installation, testing and commissioning of 2.0 TR split including hole cutting, finishing etc. as per direction of the Engineer-in-Charge

Supply, installation of additional length of copper pipe beyond 10 ft length of appropriate size as suitable for 2.0 TR as per manufacturer guideline (5/8” & ¼” diameter etc.) for both suction and liquid line with insulation and necessary wiring between indoor and outdoor units.

Providing hard PVC pipe of best quality of 25 mm diameter including necessary clamping and fitting for draining of condensate water from indoor unit as per direction of the Engineer-in-Charge

Fabrication of M.S platform for placement of condensing unit by using M.S angle of (50x50x5)mm/(65x65x5)mm size base plate, nuts & bolts/universal bracket (GSS) for ODU of split type AC system including all accessories for on-site installation i/c painting, fitting, fixing grouting by cement mixer as per direction of the Engineer-in-Charge

Eastern Commerce

R.P.ELECTRONICS