Repair & Renovation at Eklavya Model Residential School Campus at Saputara, Dist. Dang (Toilet Repair, Shed, Water Tank, Door - Window etc)

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

1 Dismentaling tiled of stone floors laid in mortar 3218.00 SMT. 51.82

including stacking of serviceable materilas and disposal

of unserviceable materials with all lead and lift.

2 Providing & laying10 mm. thick cement plaster in 56.50 SMT. 168.26

single coat on fair side of ceilings for interior plastering

upto floor two level and finishing with smooth mala

plaster.(i) Cement mortar 1:4 (1 cement : 4 sand)

Ground Floor

3 Providing & laying10 mm. thick cement plaster in 56.50 SMT. 194.94

single coat on fair side of ceilings for interior plastering

upto floor two level and finishing with smooth mala

plaster.(i) Cement mortar 1:4 (1 cement : 4 sand) First

4 Providing & laying10 mm. thick cement plaster in 56.50 SMT. 221.61

single coat on fair side of ceilings for interior plastering

upto floor two level and finishing with smooth mala

plaster.(i) Cement mortar 1:4 (1 cement : 4 sand) Second

5 Providing & laying10 mm. thick cement plaster in 9.00 SMT. 248.28

single coat on fair side of ceilings for interior plastering

upto floor two level and finishing with smooth mala

plaster.(i) Cement mortar 1:4 (1 cement : 4 sand) Third

6 20mm thick sand faced cement plaster on walls above 168.00 SMT. 365.95

ground level consisting of 12mm thick backing coat of

C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing

coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

7 Providing and laying integral cement based water 922.00 SMT. 950.41

proofing treatment including preparation of surface as

required for treatment of roofs, balconies, terraces etc.

consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement

using 2.75 kg/sqm of cement admixed with proprietary

water proofing compound comforming to IS:2645 over

the R.C.C. slab including cleaning the surface before

(b) Laying cement concrete using broken bricks/brick

bats 25 mm to 100 mm size with 50% of cement mortar

1:5 (1 Cement : 5 Coarse sand) admixed with proprietary

water proofing compound conforming to IS:2645

,brick bats is finally covered by jointless cement plaster

20mm th. in C.M. 1:4 added with special water proofing

compound confirming to IS:2645 & top smooth finished

with trowel with false chequered marking of

mm.size.The treatment is carried along the vertical

surface of the parapet & other adjoining wall up to

height of about 300 mm in a shape of quarter round vata

Incl. curing etc. Comp. With average thickness of

mm and minimum thickness at khurra as 65 mm.

'(c) The whole terrace so finished shall be flooded with

water for a minimum period of two weeks for curing and

for final test. All above operations to be down in order

and as directed and specified by the engineer-in-charge.

8 With average

Providing andthickness of 120 mm

laying polished and minimum

Granite Slab 18mm thick 27.50 SMT. 2378.55

in Flooring laid 20mm thick Cement Mortar 1:4 (1-

Cement : 4-Coarse Sand) and jointed with Grey Cement

Slurry including full molded round front edges , rubbing

and polishing etc. complete.

9 Providing and laying polished Granite Slab 18mm thick 394.00 SMT. 2409.86

in Risers of steps Dedo, window sill, jembs and pillars

laid 10 mm thick Cement Mortar 1:4 (1-Cement : 4-

Coarse Sand) and jointed with Grey Cement Slurry

including full molded round edges , rubbing an

10 Providing and laying Vitrified tiles 8 to 10 mm thick , 1429.50 SMT. 1120.36

24'' x 24'' in flooring treads of steps and landing laid on

a bed of 12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand ) finishing with flush pointing in white

cement.Soluble Salt PVT. Tiles in All Rooms.

11 Providing and laying white glazed tiles 6mm thick in 2689.00 SMT. 1127.48

skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3-coarse sand) and jointed with

white cement slurry

12 Providing and fixing 37 mm thick flush door both sides 39.50 SMT. 3737.00

laminated and shutter fabricated from 35 mm thick solid

core malemine faced three layered pre laminated flat

pressed wood based exterior grade bonded BWP/BWR

synthetic resin having stamped IS 12823 gra

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

13 Providing and fixing FRP frame size 125x65 mm and 194.00 SMT. 2615.04

35mm thick FRP shutter having extra reinforcement on

sides & edges in polish finish. The core of the shutter &

frame is to be filed up with injected polyurethene foam

done in situ alongwith embedded wooden pieces for

stiffening & also taking hinges & fintures. The whole

FRP frame & shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkali. Rates are

to be inclusive of S.S hinges with necessary screws &

alluminium S.S fixtures & fastenings & fastener sleeve.

14 Providing and fixing standared extruded of alluminium 52.00 SMT. 1175.55

section of size 63mm x 38.10mm x 1.2mm (Wt.

Kg/mt) with colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

15 Providing and fixing M.S. grill of required pattern of 446.40 Kg. 128.27

windows etc. with M.S.. flats at required spacing and

frame alround square or round headed bolts and nuts or

by screws.including applying a priming coat of red lead

paint and two coats of oil painting

16 Applying two coats of Birla (white cement based) or 262.40 SMT. 172.98

(acrylic lapy- putty) or equivalent & two coats of primer

of approved brand and manufacture on new wall surface

to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign

matter and sand papered smooth. with Wall painting

(three coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to

give an even shade including throughly brushing the

surface free from mortar droppings and other foreign

matter and sand papered smooth.

17 Applying two coats of Birla (white cement based) or 482.76 SMT. 216.54

(acrylic lapy- putty) or equivalent & two coats of primer

of approved brand and manufacture on new Ceiling

surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth. Ceiling

painting (three coats) with plastic emulsion paint of

approved brand and manufacture on undecorated Ceiling

surface to give an even shade including throughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

18 Finishing wall with weather proof exterior emulsion 695.68 SMT. 167.66

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the surface

to remove all dirt, and remains of loose powdered

materials.etc complete. Priming: Apply a liberal coat of

exterior acrylic primer and allow it to dry for 4-5 hours.

Application of putty is not recommended. Minimum 4-6

hours duration is required between each coat of

weather shield max paint

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

19 Steel work welded in built up sections, framed work 5.92 Quintal 9108.48

including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint :- (A) In beams

and joints channels angles, column, tees, flats with

connecting plates or angle cleats as in

20 Providing and fixing wash down water closet (European 25.00 No 4327.52

type, W.C. Pan) with integral P or S trap including

jointing the trap with soil pipe in Cement Mortar 1:1 (1-

Cement : 1-fine sand) (Seal and cover to be measured

and paid for separately)(A) vitreous China Pattern :(i) in

white colour, Providing and fixing 12.5 Litres low level

flushing cistern with a pair, of C.I. or Mild brackets,

complete with fittings such as lead valve less syphon,

15mm nom.nal size brass ball valve with polythene

float, C.P brass handle unions and couplings for

connections, with inlet, outlet and overflow pipes, 40mm

dia.porcelain enamelled flush bend including cutting

holes in walls and making good the same connecting the

flush bend with cistern and closet (overflow pipe to be

measured and paid for separately)(A) Vitreous China (I)

In white colour, Providing and fixing plastic seat and

cover for wash down water closer with C.P. brass hinges

and rubber buffers. (B) Black plastic seal and cover,

With Jet spray heavy duty with S.S. Braided hose 60 cm

21 Providing and fixing water closet squatting Pan (Indian 27.00 No 1019.19

type W.C. Pan) size 580mm (Earthwork, bed concrete,

foot reste and trap to be measured and paid for

separately) (A) Vitreous China.(I) Long pattern = White

22 Providing and fixing Urinal or approved quality 59.00 No 696.00

including conecting the Urinal with waste pipe , tap etc.

complete.(A) White earthenware flat back or corner type

size 430mm x 260mm x 350mm.

23 Providing and fixing Urinal of approved quality 44.00 No 1674.14

including connection with trap and with integral

longitudinal flush pipe.(A) Squating plate pattern white

earthenware 550mm x 300mm.

24 Providing and fixing washbasin with single hole for 12.00 No 2429.29

pillar tap with C.I. or M.S. brackets painted white

including sutting holes and making good the Providing

and fixing C.P. brass waste for washbasin or sink. (A)

32mmdia.,Providing and fixing pillar tap,

25 Providing and fixing PVC SWR Nahni trap IS 14735 for 157.00 No 613.91

drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I

scread down or hinged grating including the cost of

cutting and making good the walls.

26 Providing and fixing screw down bib taps of following 248.00 No 186.82

size.(A) Brass screw down bib tap polished bright. (i)

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

27 Providing and fixing 600mm x 450mm bevelled edge 44.00 No 859.40

mirrror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden pluge with

C.P. brass screws and washers.

28 Providing and fixing Gun metal check or non-return 6.00 No 420.63

fullway wheel valve. 25mm. dia.

29 Providing and fixing chromium plated brass half turn 145.00 No 263.77

flush cock of approved quality including fixing in pipe

line etc. complete.(ii) 25mm dia.

30 Providing and fixing ball cock of approved. quality as 18.00 No 132.88

directed.(A) Copper Metal (A) 25mm. dia.

31 Providing laying and jointing in true line and level 442.00 RMT. 72.64

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

32 Providing laying and jointing in true line and level 675.00 RMT. 91.83

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

33 Providing and fixing concealed center point to wall 80.00 RMT. 170.35

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc.

complete.[A] 15 mm.

34 Providing and fixing concealed center point to wall 70.00 RMT. 253.82

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc.

complete. [C] 25 mm.

35 Providing, laying and jointing in true line and level 110 732.80 RMT. 899.48

diametre U.P.V.C (Type B) conforming to IS 13592-

1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size

110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost

of all materials.

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

36 Providing and fixing S.W. gully trap with C.I. grating 2.00 No 1246.91

brick masonry chamber and water tight C.I. cover with

frame of 300mm x 300mm size (inside) with standard

weight.(i) Square mouth traps.(B) 150mm x 100mm size

P or R type

37 Constructing Brick masonry road gully chamber 500mm 6.00 No. 2017.19

x 450mm x 600mm including 500mm x 450mm C.I.

horizontal grating wih frame complete.

38 Constructing brick masonry chamber for underground 2.00 No 2932.92

C.I. Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of

frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone aggregate 20mm

size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed concrete

etc. complete.(i) Inside dimensions 455mmx 610mm

and 450mm deep for single pipe line.

39 Providing & fixing G.I. Rain water spout of 50 mm.dia 6.00 No. 101.90

& 30 cm length etc.

40 Providing and fixing in position cowel went to pipes.(C) 2.00 No. 505.17

41 Providing erecting and fixing double coated PVC. (ISI) 18000.00 Lit 3.94

water tank of required capacity each with all necessary

fittings and connection etc. complete on terrace.

42 Brick work using common brunt clay building bricks 4.00 CMT. 4618.34

having crushing strength not less than 35 kg/sqcm. in

superstructure above plinth level upto floor two level in

cement mortar 1:6 (1 cement :6 fine sand) etc.comp. (B)

Conventional Fourth Floor

43 Providing and fixing window having extruded aluminum 13.57 Sqm 1705.66

Colour Powder Coated section frame main outer size

63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt,

horizontal two track member size 61.85 mm x 31.75 mm

x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of size

Kg/mt with sliding shutters of horizontal member size

40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical

member of size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing

to frame as per details etc complete for window

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

44 Providing and fixing standared extruded of alluminium 5.04 Sqm 1290.81

section of size 63.50 x 38.10 x 1.95 mm @ Wt 1.094Kg

/ Rmt with colour Powder Coated alluminium frame

with 5 mm thick transparent bronze colour tinted float

glass with colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass as details etc

complete for.window

45 Providing and fixing 1.20 Metre high fencing with 2.0 99.00 RMT. 391.93

Metre long M.S. Angle posts 40mm x 40 mm x6 mm

and oil painting 3 coats fixed at 2.5 Mt,C/c. with five

Horizontan lines and two diagonals of galvanised steel

barbed wire weighting 9.38 Kg. per 100 Metre, strained

and fixed to posts with G.I,staples including fixing the

postsin ground with 0.5 M x 0.5.M x 0.5 M. block in

C.C1:5:10 etc complete.

46 Parking shade providing corrugated G.I. sheets roofing 2176.44 Smt 3043.13

fixed with galvanized iron "J" or "L" hooks bolts and

nuts 8 mm diameter with bitumen and G.I. limpet

washers, filled with white lead (1) 0.80 mm thick sheet

with G.I. pipe as purlins & trusses with foundation of

C.C. 1:2:4 etc comp.withone coat of primer and two coat

of oil paint (i)For Tarrace Roof

47 Providing and laying polished Kota stone slab flooring 18.00 Smt 1019.39

over 20mm (Average) thick base of cement mortar 1:6

(1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty

:1.5 - coarse sand) laid over and jointed with grey

cement slurry mixed with pigment to match the shade of

slab including rubbing and polishing etc. complete. (A)

25mm thick

(Rupees One Crore Fifty Nine Lakh Ninety One Thousand Two Hundred Eight and 9506 Paisa Only)

I we am / are willing to carry out the work at …................................ % above/ Below percent ( Should Be writen

in figures And words) of the estimated rate mentioned above. Amount of my / our tender works out as under.

Estimated Amount Put to tender. 1,59,91,208.95 Estimated Amount Put to tender.

Deduct…........ % Below Deduct…........ % Below

In Words In Words

(1) The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge

for which no extra payment shall be made.

(2) The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

(3) GST and Income tax TDS will be deducted at a source while making payments of bills

(4) In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per

actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate

of input rate mentioned in all the tender.

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

(5) An amount of Rs.40.908.00 (Rupees Fourty Thousand Nine Hundred Eight Only ) towards estimated salvage value

of dismantelled materials likely to be available from dismentalling the existing structure shall be recovered from the 1st R.A.

Bill of this work irrespective of the quantity actually received on site.

Signature of Bidder

Deputy Executive Engineer Divisional Accountant

Waghai ( R&B) Sub Division Dang ( R&B) Division

Waghai Ahwa

Executive Engineer

Dang ( R&B) Division

SHEDULE B Page