Repairing & Renovation

Item RateIn

(with brief specification and reference to book Quantity Unit Amounts

No. Figure

of specifications)

[1] Dismentaling tiled of stone floors laid in mortar 1206.00 Sqm 46.7700

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and

[2] Dismantling santtary fittings like wash basin . W.C. 90.00 Each 394.5100

pan Indian and European type, flushing tank etc.

including stacking the materials with all lead and

[3] Removing and scraping of old deteriorated plaster of 685.00 Sqm 18.9400

any thickness fromm wall / R.C.C member including

stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift

[4] Providing and laying Vitrified tiles 8 to 10 mm thick, 614.00 Sqm 1073.1300

24'' x 24'' in flooring treads of steps and landing laid

on a bed of 12mm thick cement mortar 1:3 (1-

cement :3-coarse sand) finishing with flush pointing

in white cement.

[5] Providing and layingCeramic tiles 6mm thick in 593.00 Sqm 981.5000

skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3- coarse sand) and

jointed with white cement slurry

[6] Providing and fixing wash basin with pedestal of std. 15.00 Nos 1818.0000

Height with single hole for pillar tap with C.I or M.S

brackets painted white including cutting cutting

holes and making good the same including C.P. brass

waste and waste pipes and bottal trap (A) Vitreous

China: (ii) Flat Back washbasin 550 mm x 400mm

size.In colour.

[7] Pro. & Fix. wash down water closet (anglo indian 15.00 Nos 3171.4000

W.C pan of Vitreous china Patern.) with integral "p"

or "s" trap and PVC flushing cistern with a pair of

C.L.I. Or Mild steel Brackets, complete with fittings

such as lead value siphon, 15 mm. Nominal size

brass ball valve with polythene float, C.P. Brass

handle unions and couplings for connections with

inlet, outlet and over flow pipes, 40 mm. dia. flush

bend including cutting holes in walls and making

good the same connecting the flush bend with

cistern and closet etc comp incl plastic sheet cover

including jointing trap with pipe in cm 1:1 (a)

Vitreous china in white or color

Description of Item

Item RateIn

(with brief specification and reference to book Quantity Unit Amounts

No. Figure

of specifications)

[8] Providing and fixing PVC SWR Nahni trap IS 14735 27.00 Nos 558.3600

for drain - 100 mm diameter with jali of the

following nominal diameter of self cleansing design

with C.I scread down or hinged grating including the

cost of cutting and making good the walls.

[9] Providing and fixing screw down quarter turn bib 15.00 Nos 186.8300

taps of following size (A) Brass chromium plated

screw down bib tap (i) 15mm dia. or as per the

instruction of Engineer incharge.

[10] Providing and fixing 600mm x 450mm bevelled edge 15.00 Nos 833.7300

mirrror of superior glass mounted on 6mm thick

A.C. sheet or plywood sheet and fixing to wooden

pluge with C.P. brass screws and washers.

[11] Providing and fixing C.P. brass towel rail comlete 15.00 Nos 603.1900

with C.P. brass brackets fixed to wooden plugs with

C.P. brass scews (B) 600mm x 20mm size.

[12] Providing and fixing pillar tap, capstan head, screw 15.00 Nos 308.7300

down high pressure with screws, shanks and back

nuts. (i) 15mm dia.

[13] Providing & Fixing Premium quality approved make 15.00 Nos 2365.0500

like Jaquar / ESSCO or equivalent Angular stop cock

with wall flange including labour, material,

trasportation etc.complete as directed by engineer

[14] Providing laying and jointing in true line and level 90.00 Rmt 72.6500

15mm dia. U.P.V.C. Pipe (SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

materials.

[15] Providing laying and jointing in true line and level 60.00 Rmt 91.8400

25mm dia. U.P.V.C. Pipe (SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

materials. [B] 25mm dia.

Description of Item

Item RateIn

(with brief specification and reference to book Quantity Unit Amounts

No. Figure

of specifications)

[16] Providing, laying and jointing in true line and level 45.00 Rmt 714.4600

75 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at every

2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including

cost of all materials.

[17] Providing, laying and jointing in true line and level 90.00 Rmt 835.1500

110 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at every

2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including

cost of all materials.

[18] Providing and fixing MS Z clamp on Wall or celling 143.00 No 75.7500

for Pipe Fitting including all type necessary fittings

and accessory etc. completed as per directed

engineer in charge.

[19] Providing & Fixing Premium quality approved make 24.00 Each 6980.1100

like Jaquar / ESSCO or equivalent Wall mixer having

3-in-1 system with provision for both hand shower

& over head shower complete with 115 mm long

bend pipe, connecting legs and wall flange

(excluding hand and over head shower) including

labour, material, trasportation etc.complete as

directed by engineer incharge.

Description of Item

Item RateIn

(with brief specification and reference to book Quantity Unit Amounts

No. Figure

of specifications)

[20] Constructing brick masonry chamber for 4.00 No 2932.9300

underground C.I. Inspection chamber and bends

with briocks having croshing strength not less than

35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions, total

weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg.) (R.C.C.

top slabe with 1:2:4 mix (1-cement :2- coarse sand

:4-graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete (i) Inside dimensions 455mmx 610mm

and 450mm deep for single pipe line.

[21] Demolition including stacking of serviceable 6.00 Cumt 1030.8100

materilas and disposal of unserviceable materials

with all lead and lift. (i) R.C.C. work

[22] Excavation for foundation upto 1.5 m depth 12.00 Cumt 117.0800

including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

50 Meter lead (A) Loose or soft soil

[23] Constructing Bombay Pattern Type Catch Pit of size 2.00 No 3141.9100

0.60 x 0.60 depth up to 1 mt including excavation,

B.B.C.C. (1:5:10) , 23 cms thick brick maso. wall in

the prop. of CM (1:6) with 40 mm thick IPS flooring

in the prop M15 at bottom and 15 mm thick cement

plaster inside the catch pit in the proportion of CM

(1:3) with out jali etc. comp. as directed.

[24] CatchPit Jali (Heavy duty) Fixing P/F FRC catch pit 2.00 No 1391.4200

jali with frame 600mm x 600mm clear opening etc.

comp.. As directed by engineer in charge.

[25] Providing laying (to level or slopes) and jointing 25.00 Rmt 240.2100

reinforced concrete Light duty non-pressure pipes

I.S. class NP2 of the following internal diameter with

collars and butt ends prepared for collar joints

including testing of joints complete (B) 150mm

[26] Repairing to Door / Window including dissembling 32.00 Sqm 567.7900

from frame, wroughting, providing patti, angles,

replacing / repairing stoppers - aldrops - handles

etc. for proper fixing in to frame hole etc. complete

for smooth operation and proper utilization

including assambeling and Refixing of the same and

Painting one coats (excluding priming coat) on

previously painted wood and wood based surface

with enamel paint, to give an even shade including

cleaning the of all dirt, dust and other foreign matter

as directed by Engineer-in-charge.

Description of Item

Item RateIn

(with brief specification and reference to book Quantity Unit Amounts

No. Figure

of specifications)

[27] Applying general insecticide pest control treatment 1907.00 Sqm 89.2800

to floors, cupboards etc including labour materials

etc. complete. Using Imidacloprid 30.5 SCas Per IS

6313 part -II ( (0.075% concentration by mass) is

recommended 10.5ml chemical diluted with 5 liters

of water application 0.5 litre chemical /Sqm of

surface is recommended as per I.S.

[28] Providing & Laying Damp Proof Waterproofing 166.00 Sqm 350.4300

treatment on Terrace by Clearing the existing

surface to remove dirt & dust by brush, Apply One

Coat of a Primer (covering approx 10 Sq.m / 1 Litre)

then apply Two subsequent coat of Damp Proofing

Solution (covering approx 1.5 Sq.m / 1 Litre in two

coat) on the terrace of approved brand's as directed

by engineer in charge.

[29] Providing 15mm thick cement plaster in single coat 50.00 Sqm 221.6000

on Rough (Similar) side of single or half brick walls

for interior plastering upto floor two level and

finished even and smooth in (ii) Cement mortar 1:4

(1-cement :4-sand)

[30] Providing and laying Machine cut, Free edges, 77.00 Sqm 3265.3300

Machine polished Granite stone slab 18 mm

(Average) thick {Single piece not more than 150 cm

} for stair steps and riser as per design incl. full

moulded round front edge & 1 cm nosing &

necessary groobe on trade of steps laid on 20 mm

thick cement mortar 1:6 (1 -cement : 6 coarse sand)

jointed with grey cement slurry including rubbing

and polishing etc. complete

[31] Repairing and replacing cupboard shutter of 31.00 Sqm 2462.3700

approved design and size, including removal of

damaged shutter, dismantling of old fittings,

providing and fixing new 19 mm thick BWR grade

plywood/MDF shutter finished with laminate on

exposed face and balancing laminate on inner face,

edge banding, necessary screws, handles, magnetic

catch, SS hinges, adjustment, alignment, fixing in

position, complete as directed by Engineer-in-

[32] Removing dry or oil bound distemper by a washing 5395.00 Sqm 12.5800

and scraping and sand papering the wall surface

smooth including necessary repairs to scratches

[33] Applying two coats of putty & two coats of primer of 788.00 Sqm 40.5900

approved brand and manufacture on new wall

surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

Description of Item

Item RateIn

(with brief specification and reference to book Quantity Unit Amounts

No. Figure

of specifications)

[34] Distempering with dry distemper of approved brand 3940.00 Sqm 47.4100

and manufacture (two coats) and of required shade

on wall surfaces of given an even shade, over and

including a priming coat of whiting after thoroughly

brooming the surface free from mortar dropping

and other foreign matter.

[35] Distempering with dry distemper of approved brand 1198.00 Sqm 53.7700

and manufacture (two coats) and of required shade

on Celling Surface surfaces of given an even shade,

over and including a priming coat of whiting after

thoroughly brooming the surface free from mortar

dropping and other foreign matter.

[36] Finishing wall with weather proof exterior emulsion 258.00 Sqm 114.5300

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose

powdered materials.etc complete

[37] Painting one coats (excluding priming coat) on 207.00 Sqm 95.4800

previously printed steel and other metal surface

with synthetic enamel paint, brushing to give an

even shade including cleaning the surface of all dirt,

dust and other foreign matter.

[38] Providing and fixing Standard extruded color 155.00 Sqm 2965.3600

anodized alu. Section main frame (outer size 95mm

x 24.10mm x 1.17mm weight. 0.738 kg. /rmt.)

Three track horizontal member and vertical member

of size 92mm x 31.75mm x 1.50mm. (weight 1.06 kg

/ rmt.) ; With 1 mm thick Mosquito Net, with rubber

gasket, air lock strip and finishing joints with

silicone sealant, with standard extruded color

anodized aluminum coated fittings & fixture with all

three track mosquito net shutter.

[39] Providing erecting and fixing double coated ISI 8000.00 Litre 3.9500

water tank of required capacity each with all

necessary fittings and connection etc. complete on

[40] Providing and fixing M.S. grills of required pattern to 3164.00 Kg 101.1700

wooden frames of windows etc. with M.S. flats at

required spacings and frame alround, square or

round bars with round headed bolts and nuts or by

screws (A) Plain Grill.

[41] Providing & Fixing of Bird net 1" x 1" made of 0.50 135.00 Sqm 146.4500

mm Thick Nylon wire ) erected on site as per

direction of engineer in charge .

Description of Item

Item RateIn

(with brief specification and reference to book Quantity Unit Amounts

No. Figure

of specifications)

[42] Providing and Fixing High Quality Toughened Glass 96.00 No 454.5000

12 inch Size with F-Bracket wall mountable and

Screws Mount Mechanism Corner Shelve as per

direction of engineer in charge .

[43] Providing and applying High Solar Reflective Index 2443.00 Sqm 196.9700

(SRI) Heat Reflective Cool Roof Coating of approved

make polymer-based, elastomeric, water-based, UV-

resistant, weatherproof, high SRI roof coating,

having high solar reflectance and thermal emittance

to reduce roof surface temperature. The coating

shall be applied over thoroughly cleaned and

prepared RCC/ concrete/terrace roof surface in the

manufacturer's recommended primer (where

required) followed by minimum two coats of heat

reflective coating to achieve a Dry Film Thickness

(DFT) of not less than 400–500 microns or as

specified by the manufacturer. The work shall

include surface preparation, cleaning, crack filling

with compatible repair mortar/sealant, primer (if

required) application of coating, curing as

recommended, scaffolding, labour, tools & plants,

handling, transportation and all incidental works

complete in accordance with the manufacturer's

specifications and as directed by the Engineer-in-

[44] Providing, supplying, fixing, testing and 24.00 Sqm 1345.6000

commissioning approved quality wall-mounted

Solid PVC Electricity Meter Cabinet (Meter Box) of

0.50Mtr. Depth made from high-impact, UV-

stabilized, fire-retardant, termite-proof and weather-

resistant engineering plastic, suitable for

indoor/outdoor installation. The cabinet shall be

complete with transparent inspection window,

hinged front door with SS hinges, lockable

arrangement, ventilation slots, cable entry and exit

knockouts, mounting accessories, glands, hardware,

and all necessary fittings. The enclosure shall

provide adequate protection against dust, moisture

and corrosion and shall be suitable for

accommodating single-phase or three-phase energy

meters as specified. The cabinet shall be securely

fixed on wall using suitable anchor fasteners,

aligned and leveled properly, complete with all

accessories, making good the disturbed surface,

testing and commissioning, as directed by the

Engineer-in-Charge (Measure Fornt Area for

[45] Excavation for foundation upto 1.50mt.Depth 4.00 Cum 149.6700

including sorting out and stacking of useful

materials and disposing of the excavated stuff as

directed with in all lead & Lift (B) Dense or Hard

Description of Item

Item RateIn

(with brief specification and reference to book Quantity Unit Amounts

No. Figure

of specifications)

[46] Providing and casting in situ Ordinary cement 4.00 Cum 3637.0700

concrete M-150 for R.C.C. Raft and cut-off walls

including necessary shuttering laying, vibrating,

ramming and curing complete.

[47] Providing and Casting in situ Ordinary Cement 8.00 Cum 4443.2800

Concrete M-200 for R.C.C. Raft and cutt-off walls

including necessary shuttering laying, vibrating,

ramming and curing complete.

[48] Providing and fixing 90 cm high Stainless steel 48.00 Rmt 3143.7400

railing made from anticorrocive S S pipe of 50 mm

dia (16Gauge) as hand rail with S S 38 mm dia

(16Gauge) as a vertical support fixed in RCC slab at

1.2m c/c including three horizontal S S pipes of

mm dia (16Gauge) at eqal distance fixed by

mm dia (16Gauge) S S pipe including accessories as

per detailed drawing as directed etc. complete.

Total Rs.

I/We am/are willing to carry out the work at…......................% above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned

in all the tender.

5. Credit of Dismantal Material amount of Rs……NA…. must be recovered from Contractor's R.A Bill.

6. Payment will be given only if the material testing result is satisfactory.Testing of material shall be

done as per statement attached with specification

Signature of Contractor Deputy Executive Engineer Executive Engineer

R & B Sub Division Kheda R & B Division

Nadiad Nadiad