REPAIR TO BOUNDARY WALL ,RETAINING WALL AND OTHER B/R EXTERNAL SERVICES AT 7E AREA AT MIL STATION PITHORAGARH

Amount

DESCRIPTION OF ITEMS

Demolition of concrete (Un reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M & L for precast cement concrete Block Masonary with solid blocks type C1 1:3:6 20mm graded stone aggregate exc 10cm in width and setting in CM 1:6 complete and including demolition work all as specified and directed .

Taking down cement or cement plaster, pointing any description on bricks or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M&L for 15 mm thick rendering on brick or concrete surfaces in CM 1:4 including finishing the surface even and smooth without using extra cement all as specified and directed

M&L Rendering 15 mm thick in two layers consisting of first layer 5mm in CM 1:6 and top layer 10mm thick in CM (1:4) plastering on stone masonry surface and rendering is to be finished even and smooth w/o using extra cement including filling up all the gaps and holes as required including taking down cement plaster ,pointing, racking out joints, hacking for key, scrubing down with water

M&L for preparation of new plastered or un plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

Materila and labour for preparing of new plastered surfaces of walls and applying Three coat of white wash on walls including cornices etc complete all as specified and directed

M&L for two coats of exterior emulsion paint (weather coat of Berger or equivelent ) over a coat of primer over a thin layer of wall putty on newly plastered surface of wall complete all as specified and as directed.

M & L for providing cement concrete type B1 ( 1:2:4) using 20 mm graded stone aggregate, as in coping ,bed blocks including necessary form work complete all as specified and directed

M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in surface channels and drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl forms , moulds ,mitred stopped ends etc.

Add or deduct for each 25mm girth or part thereof over or under 30 cm inner girth

M&L for 75 mm thick PCC 1:3:6 type -C2 using 40 mm graded stone aggregate as in sub base to floors etc, finished rough to receive floor finish complete all as specified and directed.

M & L for chequered cement concrete coloured tiles 30 cm x 30 cm x 20 mm thick , with grey cement and pigments, set & jointed in neat cement slurry and pointed with cement & suitable coloured pigment to match the tiles in floors over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for refixing of interlocking paver blocks with grey cement and pigment including dismantling of interlocking paver block laid bedded and pointed in any mortar of any description or thickness in floors, complete all as specified and directed.

S & F machine pressed rubber moulded coloured precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade including dismantling of interlocking paver block laid bedded and pointed in any mortar of any description or thickness in floors, all as specified and directed.

M & L for 40 mm thick PCC 1:3:6 type C-1 using 20mm gradd stone aggregate as in floors for levelling course on existing cleaned surface etc for laying paver blocks, chequered tiles etc finished rough to receive floor finishes complete all as specified and directed.

M & L for sand filling under floors or in foundation including watering and consolidation.

Demolition of concrete (Reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for MS TMT bars10mm dia and over cut to Length bent to shape required including cranking, bending, spirally for hooping for columns with an incl MS wire(Annealed not less than .90 mm Dia) or securing with clips complete all as specified and directed.

M & L for providing pre cast cement concrete (reinforced)Type B1, 1 : 2 : 4 (20mm graded aggregate) set in cement mortar 1 : 6, in landings, for RCC cover slabs for drains cover with plain faces complete all as specified and directed.

Cleaning of blockage of weep holes of any type or any size in retaining walls by way of rodding and removal / clearing of mud, vegetation growth with rodding up to extreme end and making good the shape and size of weep hole with cement mortar in CM 1:4 complete all as specified and directed by Engineer-in-Charge

Demolition of Brickwork or stone/ boulder masonry, built in CM including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L for providing precast cement concrete bonders (for stone walling) type B1 (1:2:4) using 20 mm graded stone aggregate, set in cm 1:6 complete all as specified and directed.

M & L for walling of random rubble, uncoursed well bounded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed.

M & L for walling (Except stone) of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed

Demolition of Brickwork or stone/ boulder masonry, laid dry complete all as specified and directed.

M & L for walling of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work complete all as specified and directed.

M & L walling (Except stone) of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work complete all as specified and directed.

Hand packing (any thickness) at back of walls with broken stone or boulders and raising (or lowering) to the required level complete all as specified and directed.

M&L for raised pointing to random polygonal rubble, uncoursed or brought upto courses in CM 1:4 complete all as specified and directed.

S&F in repairs 75mm bore PVC(SWR) pipes single socketed for weep holes , in any length as in weep holes complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, in natural ground including taking out embedded portion and making good disturbed ground

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in soft / loose soil

M&L for MS round bars (Fe-410-W (Gde E-250) quality A or Fe-290 (Gde-E-165) 10mm dia and over cut to Length bent to shape required incl cranking, bending, spirally for hooping for columns with an incl MS wire(Annealed not less than .90 mm Dia) or securing with clips .

S & F for Chain link mild steel galvanised fencing of 3 mm dia of wire and aperture 75 x 75 mm including line wire straining boldts etc rails & binding wire including dismantling old fencing complete all as specified.

S&F mild steel in Bands,straps,hook,pintle hinges staples,hand made sliding bols wind ties for roof including securing bolts, posts and struts in fencing including cuttingtop to shape as directed, drilling, holes, notching for wire etc flat iron fillets (for securing wire mesh etc) incl all necessary drilling, bolting or riveting etc and similar work confirming to Fe 290 Gde E-165.

ditto as per item no 37 above but fixing only .

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc 10 cm long and 16 to 20mm diameter of neck

M & L for Cement Concrete Type C-2, 1 : 3 : 6 (40mm graded aggregate) as in foundation filling and mass concrete or for embedding of posts etc

M & L for two coats of synthetic enamel paint over a coat of red oxide primer on steel surface of any description exc. 10 cm width or girth including preparation of new steel surfaces, complete all as specified and directed.

S & F galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolt, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc all as specified and directed

M & L for precast concrete Kerb Stones factory made as in repairs of type B1, 1 : 2 : 4 (20mm graded stone aggregate) 10 to 15 cm thick and and setting in CM 1 : 6 including taking out existing broken stone with necessary excavation etc complete all as specified and directed.

dito as per item No 43 above but in fixcing only

SK Traders Sons

m/s bahadur singh samant

M/S RAMESH SINGH ADHIKARI

basant ballabh punetha