REPAIR MAINTENANCE OF PLASTERING, FLOORING, ROOF COVERING, FALSE CEILING AND OTHER MISC BR WORKS AT ADM TRG AREAOF GRRC AT LANSDOWNE.

Demolition of brickwork or stone boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level )and removing unserviceable material,outside cantt area complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness in floors, laid bedded and pointed in any mortar aprons complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting , any gauge thickness including Nanital or similar pattern roof covering complete all as specified and as directed.

Dismantling ballies, hard or soft wood, any position except in post and struct including taking out iron scraps, bolts and nuts etc if any type -I complete all as specified and directed.

S&F for Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming to Fe 410W(Gde-E-250 Quality) complete all as specified and as directed.

Material and labour for 75 mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M & L for chequered tiles 30cm x 30cm x25 mm thick, glossy finished, (ISI Makred) set jointed and pointed in neat and cement slurry in floors with grey cement and pigment including screed bed 20mm thick in CM 1:6 complete all as specified and directed.

M&L for cement concrete type B-2 (1:2:4) (40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

S&F Pre-painted galvatume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ 150) as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F in repairs E-boards, ceiling, 4 mm thick with J framed work with main Tee of size 24 x 28.5 mm made out of PGI sheet .3 mm thick double at web and single at flange, flange coverd with powder coated sheet 0.25 mm thick and wall angle 24 x 24 x .45 mm powder coated for ceiling , ceiling boards 60cm x 60cm x 4mm thick , suspended with GI wire 2mm dia and 2m average length with adjustable hanging device complete including plugging in brick/stone walls with steel rawl plug @ 600 mm C/C Ceiling board shall be pressed to the ceiling tee with staple clips at all four sides and making good all the disturbed portion complete all as specified and directed.

M & L for pre polished 18-20mm thick Granite slab white and black table rubbed in cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match incl rounded exposed edge complete all as specified and including directed.over 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:4 complete all as specified and as directed.

M & L for providing 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and as directed.

M&L for joint free , Non- skid coloured ceramic tiles 7 to 8 mm thick area of each tile exe 0.18 sqm but not exe 0.38, as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10 mm thick rendering in CM 1:6 Set and jointed in neat cement slurry complete all as specified and as directed.

M&L glazed ceramic tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 15 mm thick rendering (1:6) complete all as specified and as directed.

Taking down cement plaster of any description including raking out joints, hackisng for key, scrubbing down with water etc complete all as specified and as directed.

Material & labour for Rendering 15 mm thick CM 1:6 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick in two coats i.e. 10mm thick in CM 1:6 and 5mm thick in CM 1:4 using water proofing liquid compound as per manufacturer's instructions complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparation of newly plastered surface of external wall all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint (walmista of Berger paint or equitant in Asian paint, Nerolac etc over one coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered surface of internal wall by application of wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of distemper oil emulsion over a coat of primer using roller all as specified and prescribed by manufacture of paint complete all as specified and as directed.

S&F in repairs vitreous china squatting pan 'orissa pattern 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flushing pipe but incl fixing) complete all as specified and as directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern (Dual action ISI Marked), low level , white, with inlet ball valve, float and handle including brackets and flush pipe suitable for IWC of polyethylene of low or high density complete all as specified and as directed.

S&F Vitreous china wash hand basin in repair, white, flat back of size 550x400mm with PVC connection (15x450)mm long with PTMT nuts and PVC washer and including cutting for pinning in ends,pair of cast iron brackets and provision of PVC waste pipe 32mm of adequate length , waste coupling 32 mm dia of PTMT half or full threaded Min wt 45 gram, complete all as specified and as directed.

S&F in repair PVC pipe 32/40 mm dia as in waste pipe to sink complete all as specified and as directed.

S&F in repair CP Brass Tubular towel rail 20mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and directed.

S&F in repair PVC connection 15 mm size, of length 450 mm, with PTMT nuts supplied and fixed in repairs complete all as specified and as directed.

S&F in repair 15 mm Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm, complete all as specified and as directed.

S&F in repair Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs,unions etc.) of nominal bore 20mm, complete all as specified and as directed.

Supply only Pillar tap 15 mm dia fancy type, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with scrwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair 15mm Bib tap fancy type cast copper chromium plated alloy with capstan handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair Stop Angle valve cast copper alloy chromium plated 15mm dia, screwed down, high pressure with capstan handle, screwed both ends for iron pipes or for unions and fixed complete all as specified and as directed.

S & F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Please Enable Macros to View BoQ information