Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.4 LAccepted-AOC 179 THE MALL AMBALA CANTT 133001 HR | AMBALA | HARYANA | 133001 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹29.4 L+₹99,073.15 (3.49%)Rejected-Finance 256 MODEL TOWN AMBALA CITY 134003 | AMBALA CITY | AMBALA | HARYANA | 134003 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹29.5 L+₹1.0 L (3.69%)Rejected-Finance 27 19 F F D BLOCK CHATTARPUR EXTN SOUTH WEST DELHI DELHI 110075 | SOUTH WEST DELHI | DELHI | 110075 | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹29.9 L+₹1.5 L (5.36%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹33.9 L+₹5.5 L (19.4%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹43.4 L
EMD Value
₹86,840
Closing Date
10 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF AMBALA
GE AF AMBALA
ADDITION/ ALTERATION TO CERTAIN OMQS AT AF STN AMBALA UNDER GE (AF) AMBALA
2024_MES_646312_1
GE AF/AMB-T-79/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE AF AMBALA
ALL AS PER NIT AND TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE AF AMBALA
₹86,840
Yes
10 Jun 2024
13 Mar 2024
12 Apr 2024
13 Mar 2024
10 Apr 2024
27 Mar 2024
Amount
Demolition of brick work built in cement mortar including all quoins, pillars etc but excluding ashlar facings, dressed stone work and precast articles and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and as directed.
Demolition of reinforced cement concrete of any description and in any position at level of any high as in roof ,chajjas, fascia and parapet any thickness and removing the debris out side MD land complete all as specified and directed.
M& L for RCC 1:2:4, TYPE B1, (nominal mix) (using 20 mm graded mechanically crushed stone Aggregate) as in chajjas, lintel ,shelves, kitchen slabs and incl form work complete all as specified directed
Demolition of cement concrete in ground floor and paving not exceeding 15cm below or above ground level removing debris outside MD land complete all as specified and directed
M&L for Cutting out bricks, forming toothing for, and bonding new work built in CM 1:6 into old work including valves of new materials entering old walls and jointing and pointing, complete all as specified and directed.
S&F Vitrified tiles light colour 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed of CM 1:4 complete all as specified and as directed.
S&F Vitrified tiles light colour 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting and dado including 10mm CM1:3 render etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed
M&L 12 mm thick Gypsum board false ceiling of size 610x610 mm fixed with Anodised aluminium snap grid frame work for false ceiling , size of grid 605x605 mm incl hanger 6mm dia (up to 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long complete all as specified and directed by the E- in - Charge .
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.
Excavation in post holes (or similar holes) each not exceeding 0.50cum getting out, returnng filliing in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.
M & L for Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded mechanically crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.
S & F Roof trusses ,trussed, purlins, crane gantries,rails and fastening and heavy bracket framing( beam,tee,angle,channel or flat section incl distance pieces, cleat etc. confirming to IS 1161-1979 grade Fe-410-W(Gde-E-250) quality complete all as specified and directed
S & F MS screw bolt 450 mm long 16 mm dia ( machine made) with hexagonal or square head at one end and screwed the other or screwed both ends each screwed end to be fitted washer and one hexagonal etc, complete all as specified and directed.
S & F MS plate ( plain or chequered) channel, square cut or notched ( Fe 410 W Gde E-250 quality-B with riveted, bolted or welded attachment complete all as specified and directed.
M&L for hard core brick broken of gauge exc. 63 mm but n.exc. 100 mm, deposit spread and levelled in layer n.exc. 500 mm thick watered and ramming to a true surface.
M & L for 100 mm thick plain Cement concrete type D-2, 1:4:8 (using 40 mm Graded mechanically crushed stone aggregate) as in sub base etc, complete all as specified and directed
M&L 150 mm thick PCC 1:2:4, Type B2, (using 40 mm graded mechanically crushed aggregate as in paving/path finished fair and even incl joints complete all as specified and directed.
M&LChequered cement concrete tile flooring with tiles of size 30 cm x 30 cm x 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry, over and including screed bed of 15 mm thick in CM (1:6) complete all as specified and as directed.
Excavation in trenches not exeeding 1.5m wide and not exceeding 1.5m deep getting out in hard/dense soil complete all as specified and directed
M & L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each complete all as specified and directed
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm but not exceeding 4sqm each complete all as specified and as directed.
S&F factory made BOX type steel windows double shutter (glazed and wire gauzed) with side hunges shutters, includingbox type hinges ,steel handle fabricated type for each leaf duly welded , mild steel barrel tower bolts 150mm size(02 nos for each leaf) duly welded,complete with glazing bars , dovetailed or welded,including MS fillets, including provision and welding of guard bars including one shop coat of red oxide primer over window frame & guard bars complete all as specified and directed NOTE :-(I) Glazing & wire gauze shall be measured and paid separately as supply and fixing and guard bars shall be measured and paid saparately. (ii)The term double shutter stated is meant for providing glaze shutter as well as wire gauze shutter on outside and inside of the frame respectively.
S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanesed wire stapels complete all as specifed and directed.
Supply and fixing sheet glass 3mm thick ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/ spring clips wherever necessary complete all as specified and as directed.
Supply and fixing 3mm thick figured glass, pin head type glazing as in square n.exc 0.5 Sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/ spring clips wherever necessary complete all as specified and as directed.
S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0, complete all as specified and directed
Supply and fixing mild steel framed work as in door of angle or other sections with gusset plates, rails, braces etc, using ornamental design as approved complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and purpose made hinges or steel hanging door fittings exclusive of steel sheeting or other covering, running rails and guides and hanging, fastening and fixing complete conforming to Fe 410E, Gde E-250 complete all as specified and as directed.
S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed by Engineer-In-Charge.
S&F factory made solid PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for bottom and top rails. MS frame shall be covered heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail; Panelling for plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at the site as per specification, complete all as specified and directed
S & F 35 mm thick plain framed panelled factory made shutters with IInd class hardwood rail and style with lock rail and panel of 9 mm BWP commercial ply with commercial vaneer on both faces. The size of rail and style as per IS - 1003 Part - I complete all as specified and as directed.
S & F 35mm thick IInd class hardwood glazed and skeleton shutters open rebated and prepared to receive gauge (without sash bars)edges of framing plain, chamfered or round fitted with cut and mitred beads for securing wire gauge sizes of members of shutters complete all as specified and directed
M&L for 6mm thick teak wood lipping fixed to Prelaminated particle board with nails complete all as specified and directed.
S & F 18/ 19 Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one side and other side balancing white face ; fixed with screws to timber frame work complete all as specified and directed
S & F Decorative laminate type1, 0.90 to 1mm thick , of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and directed.
S & F fancy type stainless steel handle of size 100 mm long complete all as specified and as directed
S&F 40mm dia, cupboard knobs fixed with nut, screw & washer of mild steel, bright finished, complete all as specified and directed
S & F Magnetic ball catches of standard type fixed complete all as specified and as directed
S&F Continuous (piano) hinges, stainless steel, bright finish or electrogalvanised with width of flaps (When open) 40 mm complete all as specified and directed
S&F 100 mm size hasp and staple,safety type,aluminium anodised,including bolt to hinge plate and fixed with screws,complete all as specified and directed
S & F Aluminium anodised cast type handles 150mm long complete all as specified and directed
S & F Aluminium anodised cast type handles 100mm long complete all as specified and directed
S&F mild steel butt hinges medium weight cold rolled of size 100 mm including necessary welding complete all as specified and directed.
M&L for Cutting holes brick walls built in cement mortar exceeding half brick thick wall but not exceeding one brick thick wall built in cement mortar for inserting hold fasts etc and making good the dismantled portion in plain cement concrete 1:2:4 type B1 & finished to match as per the existing finish complete all as specified and as directed. Note:- This item shall not be operated if hold fast holes are required at new location.
Taking down cement plaster on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water including removal of debries to distance n.exc 500 mtr complete all as specified and directed.
Material and labour for Brick work with sub class B bricks of old size, straight or curved on plan exeeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed.
M&L for 15mm thick rendering on brick or concrete surface in cement mortar 1:6 and finishing the surface with even and smooth without using extra cement all as specified and as directed.
Material and labour for rendering 5 mm thick in CM 1:3 on the soffits of slab/chajjas/sunshade etc finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for rendering 15 mm thick in CM 1:4 mixed with WPC @ 2 % by weight of cement finished even and smooth without using extra cement on fair faces brick or concrete surfaces complete all as specified and directed. Note : WPC shall be measured and paid separately as supply only.
M&L for rough cast plaster including 15mm thick rendering in CM 1:3 on brick wall or concrete concrete surfaces complete all as specified in SSR Part - I clause 14.22 complete all as specified and directed. Note : Rough cast finish to be as below :- After applying the under coat of cement mortar 1:3 and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg (which is generally of size between 6 to 12mm depending on the texture required ) mixed with course sand and cement in the ratio of 1 : 1 : 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger agg are thoroughly covered.
M&L for preperation of new plastered surface of ceiling and applying three coats of white wash on ceiling white putty complete all as specified and directed.
M&L for two coats of 100% premium emulsion acrylic paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004 , alkali and fungal resistance , dirt resisitance exterior paint of approved camouflaging pattern (Company depot tinted),with silicon additives @1.43 Litre/10 Sqm over and including priming coat of exterior primer applied , on newly plastered surfaces of walls including preparation of surfaces repairing with JK / Birla white putty complete all as specified and as directed.
M&L for two coats of 100% premium emulsion acrylic paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004 , alkali and fungal resistance , dirt resisitance exterior paint of approved shade/tint camoflaging pattern (Company depot tinted),with silicon additives @1.43 Litre/10 Sqm over and including priming coat of exterior primer applied ,on complete removal of existing treatment of old plastered walls including preparation of surfaces repairing with JK / Birla white putty complete all as specified and as directed.
M&L for two coats of Oil bound distemper of approved shade/tint over a coat of primer over JK/Birla white wall care putty of any thickness to achieve smooth finish on newly plastered surfaces of walls including preparation of surfaces complete all as specified and as directed.
M&L preperation of old plastered surface of ceiling and applying two coats of white wash on ceiling repairing with JK / Birla white putty complete all as specified and directed
M&L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of previously untreated or new wooden surfaces exceeding 10 cm in width or girth complete all as specified and as directed.
M&L two coats of synthetic enamel paint on old steel surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified and directed .
M & L for preparation of old painted wood and wood based surfaces exc 10cm width ir girth and applying one finishing coat of Synthetic enamel paint etc complete all as specified and directed
M&L for Plain cement concrete type B1,1:2:4 (using 20mm graded mechanically crushed stone aggregate),25mm thick as subbase to flooring complete all as specified and directed.
Material and labour for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded mechanically crushed stone aggregate) as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mt centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and as directed. Notes :- (i) The unit rate quoted shall be deemed to include for providing the concrete in alternate bays not exceeding 3 Mtrs length,12 mm wide. (ii) 50 mm deep joints between the bays shall be provided which shall be filled with mastic filling with hot bitumen 85/25 grade and 1:2 mix volume. Cost of which is deemed to included in the quoted rate.
S&F tubular curtain rail, aluminium anodized 20 mm dia all as specified & as directed including taking down unserviceable rod/rail complete all as specified and directed.
S&F Aluminium decorative type brackets suitable to hold the curtain rod with sofio phenol (Lotto) and wooden round blocks suitable to curtain rod of 20mm dia, decorative type fixed with suitable steel screws and PVC cleats, including taking down unservicable brackets complete all as specified and directed.
M&L for brick work with sub class'B' bricks,straight or curved on plan to any radius in half brick thick wall built in CM 1:4, complete all as specified and directed
M&L for PCC in foundations, filling and mass-concrete type D2 (1:4:8) (using 40 mm graded mechanically crushed stone aggregate) complete all as specified and directed
M&L for PCC in surface channels and drains type C-0 (1:2:4) (using 20 mm graded mechanically crushed stone aggregate) complete all as specified and directed
M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitered/stopped end etc complete all as specified and directed
All as per BOQ srl item No. 68.00 but Add or deduct for each 25 mm girth or part thereof over or under 30 cm ditto complete all as specified and directed
M&L for TMT bars 10mm dia and above but to length bent to shape required including cranking bending etc and binding with mild steel wire (annealed) not less then 0.90mm complete all as specified and directed
M&L for Precast RCC 1:2:4, type B,1 (using 20mm graded mechanically crushed stone aggregate) as in cover slab of drain, culvert and the like set in CM 1:4 all as specified and as directed.
M&L for plain cement concrete 1:2:4 type B0, (using 12.5mm graded mechanically crushed stone aggregate) as in coping/ bed plate/ bed block including necessary forms and moulds and complete all as specified and as directed
M & L for laying broken stone or boulders hardcore of guage exceeding 63 mm but not exceeding 100 mm deposited spread and levelled in layers not exc 15 cm thick watered rolled/rammed to a true surface complete all as specified and directed
M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed
M & L for Rubber moulded machine pressed designer coloured precast concrete with grey cement and pigment interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and directed
M & L for providing cement concrete in roof ,Kerbs, mud stops ,interlocking tile rounded or chamfered on edges 1: 2:4 type B1 ( 20 mm graded aggregate) etc complete all as specified and directed
Removing excavated material (soils) exceeding 250 m but not exc. 500 m and depositing where directed at a level not exc. 1.5 m above starting point complete all as specified and directed
M&L for Concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed cable 1100 volts grade drawn through and including non metallic rigid PVC conduit,medium grade minimum 19mm dia ISI marked and conduit accessories fixed concealed in wall/ceiling/roof etc with sunken type pressed steel/welded MS terminal boxes made out of 1.6 mm MS sheet, 3mm thick laminated sheath top cover for mounting of fittings,switches,sockets outlets,regulators etc complete including provisining of 1.5 sqmm PVC insulated unsheathed cable 1100 volt grade with multi stranded copper conductor to common earth and connected to earth dolly complete all as specified and directed
One light/fan point controlled by one switch 6 amp one way, complete all as specified and directed
One 3 pin socket 5 amp on the independent board, complete all as specified and directed
One 3 pin socket on same board with other switches,complete all as specified and directed
All as per BOQ srl item No.78.00 here-in-above but point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed cable 1100 volt grade and 2.5 sqmm PVC insulated and unsheathed cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board, complete all as specified and directed
M&L for Surface point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed cable 1100 volts grade drawn through and including non metallic rigid PVC conduit,medium grade minimum 19mm dia ISI marked and conduit accessories fixed on surface in wall/ceiling/roof etc with sunken type pressed steel/welded MS terminal boxes made out of 1.6 mm MS sheet, 3mm thick laminated sheath top cover for mounting of fittings,switches,sockets outlets,regulators etc complete including provisining of 1.5 sqmm PVC insulated unsheathed cable 1100 volt grade with multi stranded copper conductor to common earth and connected to earth dolly complete all as specified and directed
Supply and fix switch piano modular type 5 amp single pole flush type one way complete all as specified and directed.
Supply and fix switch piano modular type 15 amp single pole flush type one way complete all as specified and directed.
Supply and fix socket outlet modular type 3 pin 5 amp multi pin flush type complete all as specified and directed.
Supply and fix socket outlet modular type 6 pin 15 amp multi pin flush type complete all as specified and directed.
Supply and fix ceiling rose 65x17mm of three terminals complete all as specified and directed
Supply and fix modular cover plate with frame for 1 module complete all as specified and directed
Supply and fix modular cover plate with frame for 3 module complete all as specified and directed
Supply and fix modular cover plate with frame for 8 module complete all as specified and directed
Supply and fix modular metal flush box 1/2 module complete all as specified and directed
Supply and fix modular metal flush box 3 module complete all as specified and directed
Supply and fix modular metal flush box 8 module complete all as specified and directed
S&F wall light fixture made up of polycarbonate, suitable for retrofit LED lamp complete including provn of flexible three core copper conductor of size 23/0.0076 from ceiling rose to fitting terminal for making connection, fixing the fitting on wall including all necessary fixing accessories including 09 watt LED lamp, complete all as specified and directed.
S&F 1X18 watt wall mounted, new generation LED T-8 Retro fit for multipurpose application with LED Rod , made from extruded aluminium housing,polycarbonate diffuser including all fixing accessories & connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed
Supply and fix new generation energy saving 9/10 watt LED bulk head (porch light fitting) made of plasitic housing with opal diffuser complete all as specified and directed
S&F ceiling fan complete with blades, down rods, fan regulator socket type and accesssories, 230V , 1200mm sweep , Min air delivery 210CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) without reomte complete all as directed. Note:- Rate for writing MES NO on C/Fan is deemed to be included in quoted rate.
Supply and fixing metal plug and socket single pole and neutral with a two pin and earth plug and socket alongwith one single pole MCB of 20 Amp concealed in wall complete all as specified and directed
M&L for submain wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 4 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper complete all as specified and directed Note : Two runs of 4 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length
M&L for submain wiring iwith 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 6 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 6 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site Note : Two runs of 6 sqmm cable alongwith one run of 6 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length
S&F MCB DB SPN 8 Way factory made IP 43 protection class metal double door with 200 Amp rating bus bar 240/430V for fixing of MCBs/Isolators/RCCBs etc complete all as specified and directed
S&F MCB DB SPN 4 Way factory made IP 43 protection class metal double door with 200 Amp rating bus bar 240/430V for fixing of MCBs/Isolators/RCCBs etc complete all as specified and directed
S&F MCBs 240/415 Volts 10 KA finger proof terminal, C curve bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB . (DB will be measured and paid separately under respective items of sch A):-
MCB SPN 40 Amps.
MCB SP 5 to 32 Amps
M&L for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand including galvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil,PCC(1:3:6) type C1 chamber,pre-cast RCC slab 50mm thic in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,15mm dia,light grade,7.5 mtr long for protection of earth lead upto test point etc complete all as specified and directed Note: (i) cost of earth strip and GI pipe for protection of earth strip deemed to be included in unit rate up to 7.5 meter. (ii) On testing if the desired earth resistance is not obtained, entire earthing shall be re-done by contractor till desired earth resistance is not obtained without accruing any extra cost to the Department. (iii) Rate is deemed to be inclusive for laying of protection pipe in PCC floors and wall and making good the damages.
S&F XLPE insulated, armoured and PVC bedded 1100 volts grade,heavy duty with stranded aluminium conductor 10 Sqmm 2 core laid in ducts/through pipes, in floor, on poles, in trenches complete all as specified and directed
M/S SHANTI CONSTRUCTION
KULWANT SINGH
Swami Enterprises
power house batteries
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .