Replacing open canal with 500 mm dia D I line at Bandhara L I Scheme.

Amount

Earthwork in excavation by mechanical means (hydraulic excavator) in foundation pipeline trenches drain (not exceeding 1.5m in width or 10 sq. m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m.: A)All kinds of soil

Earthwork in excavation by mechanical means (hydraulic excavator) in foundation pipeline trenches drain (not exceeding 1.5m in width or 10 sq. m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m.: A) All types of Ordinary rock including all types of laterite rock, blasting prohibited

GST PHE 15051 / 2019 Supplying at store or site of work including railway freight, carting, loading and unloading, stacking etc. Centrifugally cast, (spun) ductile iron pressure pipes (with socket/spigot ends) conforming to IS : 8329-2000 with cement mortar lining inside the pipe and outside zinc coat as per IS : 8329-2000 with up to date amendments suitable for jointing with rubber gasket known as TYTON joints. Class K-9 .Nominal Diameter in 500mm

Supplying, of HDPE pipes at store or site of work including loading unloading, stacking, transit insurance etc. complete bearing ISI mark & conforming to IS: 4984-1995 & made from PE 100 resin Class IV (6 kg/cm2).Outer dia. in 200mm

Outer dia. In 160 mm

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Providing & laying cement concrete 1: 1.5: 3 (1 cement: 1.5 coarse sand: 3 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: A)All works upto plinth level

Centering and shuttering including struttings, propping etc. and removal of formwork for :A)Foundations, footings, bases for columns and mass concrete.

Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile iron pipe specials including including rubber ring fitting push on joints conforming to IS :9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.Double socket Tee with branch Flanged. Nominal diameter in mm,500 X 200

M.J. Collar. Nominal diameter in 500mm

Double socket Bend 450, Nominal diameter in 500mm

Double Socket Bend 22.5 0. Nominal diameter in 500 mm

Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C.I. Sluice valve conforming to IS:14846-2000 and bearing ISI mark double flanged with cap.TYPEP.N.1.0 , Nominal diameter in mm,150 (outlet valves)

Supplying, of fabricated /moulded HDPE pipe fittings/specials as per required Pressure class of HDPE Pipes,conforming to IS:8360 (Part I & III) and IS:8008(Part I to IX).The HDPE pipe fittings/specials shall be manufactured from virgin resin PE100 .HDPE Pipe fittings/specials (fabricated/moulded),Fabricated Equal Tee of HDPE PE 100 for Butt jointing;Outer diameter in 160mm

Outer diameter in 200mm

Fabricated 90 deg.bend of HDPE PE 100 for Butt jointing, Outer diameter in 160mm

Fabricated 90 deg.bend of HDPE PE 100 for Butt jointing, Outer diameter in 200 mm

Moulded End Cap of HDPE PE 100 for Butt jointing,Outer diameter in 160mm

Moulded End Cap of HDPE PE 100 for Butt jointing, Outer diameter in 200mm

Moulded Reducers of HDPE PE 100 for Butt jointing, Outer diameter in mm 200x160

Hoisting and laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc complete as directed as per IS:2685-1971 Class I Nominal diameter in mm 150 Sluice valve

Conveying carefully from stack at site, 250m from both sides rolling and lowering in trenches, laying and jointing true to line and level and perfect linking of joints.Cast iron or Ductile iron or A.C. or S & S or flanged & PVC pipes. (A) 500 mm dia

Jointing of CI/DI pipes and specials with rubber gaskets (TYTON Joints) SBR type including cleaning the socket and spigot ends with kerosene oil/below lamp and applying soft soap to socket and spigot ends before inserting for rubber gasket jacking and fixing in proper conditions including cost of rubber gasket, oil, soft soap and hydraulic testing of jointing as per IS:3144-1985,Nominal diameter in 500mm dia

Pre-cast cement concrete solid block masonry of compressive strength 70 kg / cm2 in cement mortar 1:4 (1 cement : 4 corase sand ) in foundation and plinth size of blocks (30 x 20 x 15) , in foundation and plinth

12mm cement plaster 1:3 (1 cement : 3 coarse sand)

Neet Cement punning

Cutting of cast iron/ductile iron pipes by mechenical grinder working in electricity, including the cost of hire charges of mechenical grinder, diesel operated electrical generator set, suitable for supplying power for the grinder for cutting, cost of grinding blades, skilled work force, fuel etc required for completion of job as per the direction of engineer in charge, Dia in 500mm

Supplying stacking at site and conveying hoisting, laying in position to correct line and level and linking joints of MS specials. fabricated from MS plate including cutting, bending, welding, procurement of plates, gas cutting to required size, rolling, tack welding, assembling in suitable length to form special, welding on automatic machine and forming V edge on both ends of special as required, hydraulic pressure test at factory to the required test pressure conforming to IS : 3589-1991 including freight and all taxes, etc. complete , With 25 mm thick plate (a) flanges.

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 m and all lifts and disposal of surplus earth as directed by Engineer in Charge.

Conveying carefully from stack at site, 250m from both sides rolling and lowering in trenches, laying true to line and level and perfect linking for joints for P.V.C / H.D.P.E complete in all respects as per the direction of the engineer incharge, 160 mm OD.

GST PHE 15210 / 2019 Jointing of HDPE pipes by heating the two ends of the pipe with electrically heated mirror, to the required temperature,including the hirecharges of heating mirrir and the generator set for the electricity for the heating mirror etc complete as per the direction of the engineer in charge, 63 mm to180 mm OD, 160 mm OD

for diameter from 200 mmto 800 mm diameter, 200 mm OD

Construction of masonry chamber 90x90x100 cm inside in 40kg/sq. cm brickwork complete with 23 cms wall thickness and in cement mortar 1:4( 1 cement : 4 coarse sand) for sluice valve of sizes 100 mm, 120 mm 150 mm and 200mm dia with necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 coarse sand: 10 graded stone ballast 40 mm nominal size) and inside plastered with CM 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement complete and chamber cover as specified below etc. all complete as per standard drawing . (rate is inclusive of rate earthwork excavation, cost of surfacecover and all other materials and labour as per details below), with C.I. Surface box 100mm top dia 160mm bottom dia and 160mm deep of wt 15kg inside with chain lid in 120 mm thick RCC slab cover in cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone ballast 20 mm nominal size) .

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mts. lead.

GSR Bldgs,6052 / 2019 Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

GSR Bldgs,6045XII/ 2019 Centering & shuttering including Strutting, Propping & removal of forms for : Well steining

Providing and laying in position ready mixed concrete (RMC) High Performance Concrete per MORTH clause 1715 manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continious agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level

Extra for carriage of R.M.C. beyond the initial lead of 10 kms.

20mm cement plaster 1: 3 (1 cement : 3 coarse sand)

Extra for providing and mixing water proofing material proportion recommended by the manufacturers.

MAQBOOL H GAJIPUR (BID ID -40518)