Renovation Work of Hantex Showroom, Kozhencherry

Amount

CIVIL WORK

13.88 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

13.37.1 : White washing with lime to give an even shade:New work (three or more coats)

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

25.7 : Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Alumini um sheets (each0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

13.62.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .

od268209/2023_2024 : Providing and fixing 12 mm toughened glass panels using Patch Fittings, Including all materials and labour charges etc.

21.18 : Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)

od268210/2023_2024 : Providing and fixing Stainless Steel Chrome Finish 12 MM Glass Fitting H Handle, it including all materials and labour etc.Complete

od268211/2023_2024 : Providing and fixing Glass Door Lock No Drilling Lock for 10mm - 12mm Glass and it including all materials and labour etc.complete

9.82 : Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

13.57.1 : Painting with oil type wood preservative of approved brand and manufacture :New work (two or more coats)

od268312/2023_2024 : Open shelf with glass rack including the cost of backing with 8mm multiwood (or nearest available size),steel channels,Brackets for fixing glass,12mm thick glass with necessary beveling ,edge shaping, all labour etc complete.

od268213/2023_2024 : cash and packing counter of to a height 120cm and 240cm width using 18mm thick marine plywood with mica lamination on the exposed side and with putty painting on unexposed portion with necessary frame,inside partition at 75cm height and counter top with 12mm glass including the cost of all materials and labour charges etc complete

od268214/2023_2024 : Display counter of length of 150cm and width 60cm,height 80cm and 12mm glass top and 18mm plywood as per the drawings attached.

od268215/2023_2024 : Shelf of length 120cm, 45cm width,70 cm height using 18mm plywood as per the drawings attached including the cost of all materials and labour charges etc complete

Cleaning the existing Floor and wall

Cleaning existing Tile Floor and Raking out joints and cleaning the surface and filling the joints with joint filler of matching colour

Cleaning existing Wall and ceiling including scraping and clearing the debris from the floor within 50m

Providing and fixing Carpentary Fittings

Multipurpose Lock(small type)

2" hinges

Ball Catcher

2" tower bolt

Door Stopper

Auto Closing Hinges

Handle 3"

Handle 4"

Waste Disposal

Clearing all the debris and unserviceable material from the site as per the direction of engineer in-charge(The agency should keep the Government norms in connection with the disposal of waste material) -1load of 407size vehicle

Servicing and Cleaning existing Rolling shutter

Servicing and cleaning existing Rolling shutter area (4.4 m x 3.6 m)

Name Board

8'x2' Acrylic name board with lighting facility

5'x1' Digital Name board

Electrification and Fittings

Repairing Existing Switch boards- 3 Module

Repairing Existing Switch boards- 1 Module

Repairing Existing Switch boards- 5 Module

Checking all the electrical circuits and repairing etc complete.for the entire shop of size 4.5m x 3.3m

1.3.3: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C,(Single point for spot light-14,Fan point-4,3 in 1 point for lights-9,5A power plug point-4,15 A power plug point for AC-1)

1.4 : Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required

1.5:Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required

1.14.2:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.14.1:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

1.24.4:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 3 pin 5/6 A socket outlet

1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 A switch

1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 6 pin 15/16 A socket outlet

1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 A switch

Supplying and fixing 48" ceiling fan and other accessories

Supplying and fixing Spot lights 12v and 8v

Supplying and fixing LED strip Lights 3m length

Supplying and fixing Focus light for Board

Supplying and fixing Punch light

Supplying and fixing 45x45 square type light fitting 12 v

Supplying and fixing LED lamp at inside of the cupboard

Supplying and fixing 10A MCB and other accessories

Supplying and fixing 40A Isolator and other accessories

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Service charges for obtaining sanction ,power allocation and all other work in relation with KSEB

SOBHANA KUMAR PARAMESWARAN

Bidder Name

SOBHANA KUMAR PARAMESWARAN

P ANILKUMAR