Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Tender accepted |
Tender Value
₹18.0 L
EMD Value
₹36,070
Closing Date
29 May 2026, 3:00 pmClosed
EE, SHQ, SSB, Pilibhit
SHQ SSB Pilibhit
Repair and maintenance of 02 nos Prefabricated Barrack-118 at BOP Kuwa no 08 under 39 Bn SSB Palia Kalan.
2026_SSB_906098_2
EE/SHQ/PBT/2025-26/37
Open Tender
Civil Works
Works
90 days
BOP Kuwa No8 under 39 Bn Palia
As per NIT
2 documents required · 2 mandatory
₹0
₹36,070
SHQ Pilibhit
9 Jun 2026
21 May 2026
1 Jun 2026
21 May 2026
29 May 2026
21 May 2026
21 May 2026 - 28 May 2026
25 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing ISI marked flush door shutters conforming to IS :
2202 (Part I) non-decorative type, core of block board construction with
frame of 1st class hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and face veneers on both
faces of shutters:30 mm thick including ISI marked Stainless Steel butt hinges
with necessary screws | 9.41 | Sqm | 2,172.1 | ₹20,439.46 |
| 2 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) 300x16 mm | 5 | Each | 216.55 | ₹1,082.75 |
| 3 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378)250x10 mm | 10 | Each | 83.9 | ₹839 |
| 4 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378)125 mm | 10 | Each | 39.95 | ₹399.5 |
| 5 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | 5 | Each | 121.65 | ₹608.25 |
| 6 | Dismantling roofing including ridges, hips, valleys and gutters etc.,
and stacking the material within 50 metres lead of:G.S. Sheet | 356.13 | Sqm | 164.95 | ₹58,743.64 |
| 7 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 356.13 | Sqm | 738.65 | ₹2,63,055.42 |
| 8 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm) | 40.7 | Mtr | 532.35 | ₹21,666.65 |
| 9 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | 223.46 | Sqm | 226.25 | ₹50,557.83 |
| 10 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 1,605.6 | Kg | 133.7 | ₹2,14,668.72 |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.82 MB
nitkuwa.pdf
Tender Documents • 1.80 MB
BOQ_955986.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .