REPAIR/MAINTENANCE OF DG SETS AND MISC ITEMS UNDER GE (KH) YOL

Supply only Lubricating Oil filter element with 'O' ring.

Supply only fuel filter element with 'O' ring

Supply only Air filter element inner & outter

Supply only 'V' belt cogged type make Fenner/good

Supply only Hose pipe, including nut, bolts and clamps

Supply only Oil bypass filter element with 'O' ring

Supply only fuel water seprater

Supply only Lubricating Oil filter element with 'O' ring.

Supply only fuel filter element with 'O' ring

Supply only Air filter element inner & outter

(d) Supply only 'V' belt cogged type make Fenner/good

(e) Supply only Hose pipe, including nut, bolts and clamps

Supply only Oil bypass filter element with 'O' ring

Supply only fuel water seprater

Supply only Lubricating Oil filter element with 'O' ring.

Supply only fuel filter element primary & secondery with 'O' ring

Supply only Air filter element inner & outter

Supply only 'V' belt cogged type make Fenner/good

Supply only Hose pipe, including nut, bolts and clamps

Supply only Oil bypass filter element with 'O' ring

Supply only fuel water seprater

Supply only Lubricating Oil filter element with 'O' ring.

Supply only fuel filter element primary & secondery with 'O' ring

Supply only Air filter element inner & outter

Supply only 'V' belt cogged type make Fenner/good

Supply only Hose pipe, including nut, bolts and clamps

Supply only Oil bypass filter element with 'O' ring

Supply only fuel water seprater

Engine oil of grade 20W40 complete all as directed. Make : Castrol, Fleet Guard

Distilled water in 5 lit packed for top up distillled water for mixing of coolent as per recommended ratio, complete all as specified and directed.

M&L for preparing old metal surface by cleaning, removing old paint by paint remover/scrappers for any width or girth and applying two coats of synthetic enamel paint by spray painting (second coat shall be applied at the interval of one day) of colour, complete all as specified and directed for DG Sets as followings capacity :-

(a) 200 KVA DG set

(b) 100 KVA TO 125 KVA DG Set

(c) 62.5 KVA DG Set

(d) 20 KVA to 35 KVA DG Set

(a) Supply only gaskit set

(b) Supply only techo shaft assembly

(c) Supply only throttle shaft

(d) Supply only gear pump

(e) Supply only berral & sleeves

(f) Supply only governer plunger

(g) Supply only shut down valve assymbly

(a) Supply only injector cup set

(b) Supply only barrel plunger

(c) Supply only 'O' ring set

(a) Supply only injector cup set

(b) Supply only barrel plunger

(c) Supply only 'O' ring set

(a) Supply only injector cup set

(b) Supply only barrel plunger

(c) Supply only 'O' ring set

(a) Supply only injector cup set

(b) Supply only barrel plunger

(c) Supply only 'O' ring set

(a) Supply only Terbo repair kit

(b) Supply only Terbine wheel & shaft

(c) Supply only compressor wheel

(a) Supply only Terbo repair kit

(b) Supply only Terbine wheel & shaft

(c) Supply only compressor wheel

(a) Supply only Terbo repair kit

(b) Supply only Terbine wheel & shaft

(c) Supply only compressor wheel

(a) Supply only delivery valve

(b) Supply only roller

(c) Supply only rocker asssambly

(d) Supply only element

(e) Supply only FIP gasket set

All as per item No. 36 above but, 62.5 KVA DG set, complete all as specified and directed.

(a) Supply only delivery valve

(b) Supply only roller

(c) Supply only rocker asssambly

(d) Supply only element

(e) Supply only FIP gasket set

All as per item No. 36 above but 100KVA to 200 KVA DG set, complete all as specified and directed.

(a) Supply only delivery valve

(b) Supply only roller

(c) Supply only rocker asssambly

(d) Supply only element

(e) Supply only FIP gasket set

Supply & fixing vaccume indicator complete all as specified and directed.

Supply & fixing fuel pipe from tank to filter with all fittings complete all as specified and directed.

Supply & fixing fuel pipe from filter to pump assymbly with all fittings complete all as specified and directed.

Supply and fix in replacement 'Off Load' change over switch 415V in sheet metal enclosures 4 pole of capacity 63 Amps with side/front load handle operated, complete all as specified and as directed.

Supply and fix in replacement 'Off Load' change over switch 415V in sheet metal enclosures 4 pole of capacity 100 Amps with side /front load handle operated, complete all as specified and as directed.

Supply and fix in replacement 'Off Load' change over switch 415V in sheet metal enclosures 4 pole of capacity 160 Amps with side /front load handle operated, complete all as specified and as directed.

Supply and fix in replacement 'Off Load' change over switch 415V in sheet metal enclosures 4 pole of capacity 200 Amps with side /front load handle operated, complete all as specified and as directed.

Supply and fix in replacement 'Off Load' change over switch 415V in sheet metal enclosures 4 pole of capacity 250 Amps with side /front load handle operated, complete all as specified and as directed.

Supply and fix in replacement 'Off Load' change over switch 415V in sheet metal enclosures 4 pole of capacity 400 Amps with side /front load handle operated, complete all as specified and as directed.

Supply and fix in replacement automatic change over switch 415V in sheet metal enclosures 4 pole of capacity 100 Amps with side /front load handle operated, complete all as specified and as directed.

Supply and fix in replacement automatic change over switch 415V in sheet metal enclosures 4 pole of capacity 160 Amps with side /front load handle operated, complete all as specified and as directed.

Supply and fix in replacement automatic change over switch 415V in sheet metal enclosures 4 pole of capacity 200 Amps with side /front load handle operated, complete all as specified and as directed.

Supplying and laying in replacement synthetic Rubber insulated mats 2.0 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m. complete all as specified and directed.

Disconnecting carefully old unserviceable ammeter from panel board and S&F of new 96mm size square/circular digital type ammeter of range 0-500 Ampere, size of letters 25mm, with set of CTs of suitable rating, necessary connectiong/fixing arrangements and testing complete all as specified and directed. make AE or Equivalent

Disconnecting carefully old unserviceable Voltmeter from panel board an S&F of new 96 mm size square/circular digital type Voltmeter of range 0-500 Volt,size of letters 25mm, make -AE (ISI marked), necessary connecting/fixing arrangements and testing complete all as specified and directed

S&F as in replacement of LED type indicating lamps of RYB colours as directed at site on existing panel board including necessary fixing and connecting arrangements, complete all as specified and directed

M &L for reconditioning of unserviceable battery 12 volt, 120 to 180 Ah by replacing complete cells, PVC saperaters, electrolyte, terminals & final sealing, recharging and testing, complete all as specified and directed.

Supply and fixing in replacement of U/S batery with new 12 volts 180 AH lead acid tubular battery, complete all as specified and directed. Make- Exide, Amron.

Supply and fixing in replacement of U/S batery with new 12 volts 150 AH lead acid tubular battery, complete all as specified and directed. Make- Exide, Amron.

Supply and fixing in replacement of U/S batery with new 12 volts 120 AH lead acid tubular battery, complete all as specified and directed. Make- Exide, Amron.

S & F in replacement of old unserviceable LED Post Top Lantern light fitting 40 watt capacity with transperent diffuser and fixing arrangement on including GI Pipe light grade of dia 40 mm duely grouted on wall/brick pillar complete all as specified and directed at siteand electrical connection from junction box to light fitting, complete all as specified and directed. Make: C&S Cat .LTGLM40WHPLED/W or any equivalent model in Havells/Philips/Wipro.

Supply and fixing in replacement of LED street light fitting 70 watt complete with Pressure die cast aluminum housing enclosed with Heat resistant glass cover in frame complete with IP 65 protection and making electrical connection with using copper conductor 23/ 0.0076 round PVC insulated and sheathed three core cable including mounting on pole, complete all as specified and directed. (Make: C&S Cat Part No. LTESSI45WLED or equivalent in Bajaj/Wipro/Philips.

S&F bracket made of 25 mm dia GI pipe light grade ISI marked 1.20 mtr long bent to shape with 2 Nos MS clamp duly painted with two coat of aluminium paint over one coat of red oxide, made of 32x5mm FI with nuts, bolts and washers suitable for off size HT/LT poles including dismantling existing bracket and refixing old/new fitting all as specified and directed.

S & F in repairs Weather proof street light junction box Made of FRP or MS Sheet of size 20 x 20 x 15 cm depth including MCB, SP, 6 Amps and connecting terminals 4 way including necessary Clamps made out of MS flat iron, nuts and bolts suitable for fixing with steel tubular Poles, complete all as specified and directed.

M & L for Door joint and handle locks arrangement for any size/capacity DG set, complete all as specified and directed.

Supply and fix in replacement Solenoid switch 12 volt, complete all as specified and directed.

Supply & Fixing MCCB 4 pole with fixed thermal and fixed magnetic release, 63 Amps having rupturing capacity 16 KA, including taking out old MCCB, complete all as specified and directed.

Supply & Fixing MCCB 4 pole with fixed thermal and fixed magnetic release, 100 Amps having rupturing capacity 16 KA, including taking out old MCCB, complete all as specified and directed.

Supply & Fixing MCCB 4 pole with fixed thermal and fixed magnetic release, 160 Amps having rupturing capacity 36 KA, including taking out old MCCB, complete all as specified and directed.

Supply & Fixing MCCB 4 pole with fixed thermal and fixed magnetic release, 200 Amps having rupturing capacity 36 KA, including taking out old MCCB, complete all as specified and directed.

S&F MCCB 3 pole with fixed thermal and fixed magnetic release, 63 Amps having rupturing capacity 16 KA, including taking out old MCCB, complete all as specified and directed.

S&F MCCB 3 pole with fixed thermal and fixed magnetic release, 100 Amps having rupturing capacity 16 KA, including taking out old MCCB, complete all as specified and directed.

S&F MCCB 3 pole with fixed thermal and fixed magnetic release, 125 Amps having rupturing capacity 16 KA, including taking out old MCCB, complete all as specified and directed.

S&F MCCB 3 pole with fixed thermal and fixed magnetic release, 160 Amps having rupturing capacity 36 KA, including taking out old MCCB, complete all as specified and directed.

S&F MCCB 3 pole with fixed thermal and fixed magnetic release, 200 Amps having rupturing capacity 36 KA, including taking out old MCCB, complete all as specified and directed.

M & L Earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6.30mm thick buried directly in ground to a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.50 mtr below ground level, earth plate surrounded by 15 cm thick packed layer of charcoal and common salt alternatively upto 90 cm and connected with and including GI strip of size 25x4 mm by means of bolts, nuts, check nuts and washers of GI. 40 mm bore GI pipe light grade from earth plate up to testing point for protection of strip and 20 mm bore GI pipe medium grade with wire mesh and funnel for watering including necessary excavation and earth work PCC chamber (1:3:6) type C-2 with RCC cover complete all as shown in electrical plate No 3 of MES schedule Part I of SSR Part I (2009) complete all as specified. NOTE:- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B, 80 mm thick reinforcement with 8 mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item. (ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe and the rate includes in the unit rate of item. (iii) Earth pit chamber and RCC cover shall be painted with red paint over a primer coat and the rate includes in the unit rate of item.

M&L for checking earthing result using earth testing machine for lightening conductors and submitting the results to MES power house duly signed by user, complete all as specified & directed.

M & L for refilling of fire extinguishers of capacity 9 Kg foam / ABC type, complete all as specified and directed.

M & L for refilling of fire extinguishers of capacity 5 Kg foam / ABC type, complete all as specified and directed.

M & L for refilling of fire extinguishers of capacity 2 Kg foam / ABC type, complete all as specified and directed.

S&F antivibration pad suitable for any type of DG sets (20 KVA to 200 KVA) for mounting DG Sets including removing broken hinges and making good surface for fixing in new hinges compatible for closing and opening and greasing thereafter, complete all as specified and directed

Supply, laying, jointing and testing and commissioning aluminium conductor, XLPE insulated,PVC inner sheathed, GI strip or wire armoured and overall PVC sheathed ,heavy duty 1100 volts grade in trenches/on surface of wall/ in GI pipe including dressing and clamping the cable with MS Zinc Passivated clamps and fixing suitable thimbles/lugs including cable glands of suitable size etc of cross-sectional area 240 Sqmm 3.5 core complete all as specified and directed .

All as per item No. 82 above but of size 120 sqmm 3.5 core.

All as per item No. 82 above but of size 95 sqmm 3.5 core.

All as per item No. 82 above but of size 50 sqmm 3.5 core.

All as per item No. 82 above but of size 16 sqmm 4 core.

All as per item No. 82 above but of size 6 sqmm 2 core.

M&L of GI pipe light grade 80 mm dia for cable protection including cold drilling and making good surface as per existing, complete all as specified and directed.

M&L of GI pipe light grade 40 mm dia for cable protection including cold drilling and making good surface as per existing, complete all as specified and directed.

Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains of depth upto 1.50m (not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift upto 3.00m, including getting out in all kind of soil excavated soil and disposal of surplus excavated soil, within a lead of 50m complete all as specified and directed.

Returning, filling in including spreading laveling, watering and well ramming in layers not exceeding 25cm in any type of soil, complete all as specified and directed.

Supply and spread unwashed dry river sand for sand cushioning and covering the UG Cable in trenches, complete all as specified and directed. (Note : Punning thickness (18cm) shall be measured)

Supply & lay in trenches sub class `B’ bricks having compressive strength 75 Kg/ Sqcm for cable protection etc, compete all as specified and directed by Engineer-in-Charge.

Demolition of unrenforced cement concrete in ground floors and pavings n.exc 15 cm thickness below or above ground level, complete all as specified and directed.

M&L 75mm PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection and hard standing, complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof covering, complete all as specified and directed.

S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed ballusters walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165, including applying two coats of synthetic enamel paint over a coat of primer, as in grating/bridge over nallah for main, complete all as specified and directed.

Deduction to be made from BOQ for Sch 'A' Part - II (Schedule of credit) Note: Tenderers shall not quote for this schedule.

Please Enable Macros to View BoQ information