Repairing and maintenance contract of High Mast Tower with supply of spare parts installed over BSP Division for a period of Two year

A-Repairing and maintenance contract of High Mast Tower with supply

Six monthly maintenance work of High mast tower 10/16/20/30 Mtr (a) Complete lowering/raising system check of high mast (b) MCB,timer and panel accessories maintenance (c ) 1 greasing and oiling of all mechanism like gear box, wire rope drum, wire rope etc. (d) Checking and replacement of all safety parameter/petty items as per details. (e) Replacement of all major/defective spare part (Supplied by Railway). (f) In Breakdown maintenance work if failure occurs after or in between Six monthly maintenance work. Above/

Supply of dial timer, 230V, 50 Hz.

Supply and installation of winch suitable of safe raising lowering of lantern carriage suitable for 16 Mtr, 20Mtr and 30 Mtr. High Mast Tower against defective winch.

Supply and installation of motor 1 HP/ 1.5 HP revercible motor with pully suitable of safe raising lowering of lantern carriage suitable for 16 Mtr, 20Mtr and 30 Mtr. High Mast Tower against defective motor.

Supply and installation of LED Aviation light complete with fixing arrangement with GI pipes and clamps etc.

Supply & installation of 6 sqmm (7/19) stainless steel wire rope with 12 nos. GI clamp as per details suitable for all types of High Mast Tower against defective rope.

Supply of LED Flood Light 200 W, IP66, color: 6000K, Heatsink should be die-cast aluminium along with sufficient heat sink fins, warranty-5years.

Supply of control box made out of single door box of suitable size comprising with 2 7 nos. DP MCB 32 Amps.,1 no. 32A fuse grip, indicator, Supply of 3 phase Contactor Block 40 Amps. Capacity with Auxiliary contact and dial timer contact rating 16A/AC 230V, 50 Hz with proper wiring connection with copper wire of 2 core 6 sq.mm (approx. 5 m length) and flexible pipe complete.

Supply & laying of earth cone with supply of all materials. Above/

Installation, testing & commissioning, Design & Casting with shallow foundationof 10/16 Mtrs. High mast tower with base nut bolts as per required make and capacity.

Installation, testing & commissioning, Design & Casting with shallow foundationof 20/30 Mtrs. High mast towerwith base nut bolts as per required make and capacity.

Laying of cable of lower size ( upto 4x35 sq.mm) in PVC/Polythene pipe without digging of earth, dressing of land including all materials.

Trenching/Digging of earth 1 mtr deep for cable laying.

Dismantling of all type of high mast Tower including all machine and tools required and near about transportation at required place & location.

Fixing of control box supplied above.

Transportation of all type of high mast Tower within BSP division and near about at required place & location with suitable trolly vehicle.