REPAIR MAINTENANCE OF LED LIGHTS TUBE LIGHTS CFL AND WIRING

Amount

M&L in replacement of old unserviceable sub main wiring using 4 runs of 10 sq mm FRLS, IS 694 PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through and including PVC conduit of suitable size not less than 32mm dia medium grade surface on wall along with 1 runs of 10 sq mm PVC insulated copper conductor FRLS cable as earth lead connected to common earth dolly, including taking down existing u/s wiring and making good the existing disturbed surface using wall putty and matching colour emulsion paint complete all as specified and directed by Engr-in-charge. Note appliable for srl item Nos. 01 to 11:- The unit rate quoted shall be deemed to be inclusive of following:- (a) Cutting chases for laying/fixing conduits. (b) Making good of the disturbed surfaces to match with existing one. (c) Laying and fixing of PVC conduits with suitable clamps/clips where they are surface type. (d) Each run of conduit/casing capping alongwith number of runs of cables as described in corresponding items will be measured as one unit for payment purpose. (e) Strictly follow the proper colour code red/yellow/blue for phase ,black for neutral and green for earth. (f) Usage of existing conduit as directed by the Engineer-in-charge will be regularised as follows with recovery statement. (i) 32mm dia conduit - Rs. 75/per RM. (ii) 25mm dia conduit - Rs. 50/per RM. (iii) 20mm dia conduit - Rs. 40/per RM.

M&L in replacement of old unserviceable sub main wiring using 4 runs of 6 sq mm FRLS, IS 694 PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through and including PVC conduit of suitable size not less than 25mm dia medium grade surface on wall along with 1 runs of 6 sq mm PVC insulated copper conductor FRLS cable as earth lead connected to common earth dolly, including taking down existing u/s wiring and making good the existing disturbed surface using wall putty and matching colour emulsion paint complete all as specified and directed by Engr-in-charge.

M&L in replacement of old unserviceable sub main wiring using 4 runs of 4 sq mm FRLS, IS 694 PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through and including PVC conduit of suitable size not less than 25mm dia medium grade surface on wall along with 1 run of 4 sq mm PVC insulated copper conductor FRLS cable as earth lead connected to common earth dolly, including taking down exsting u/s wiring and making good the existing disturbed surface using wall putty and matching colour emulsion paint complete all as specified and directed by Engr-in-charge.

All as per item No.03 above but in PVC casing and capping of suitable size complete all as specified and directed by Engr-in-charge.

M&L in replacement of old unserviceable sub main wiring using 2 runs of 4 sq mm FRLS, IS 694 PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through and including PVC conduit of suitable size not less than 20mm dia medium grade surface on wall along with 1 run of 4 sq mm PVC insulated copper conductor FRLS cable as earth lead connected to common earth dolly, including taking down existing wiring and including making good the existing disturbed surface using wall putty and matching colour emulsion paint complete all as specified and directed by Engr-in-charge.

All as per item No.05 above but in PVC casing and capping of suitable size complete all as specified and directed by Engr-in-charge.

M&L in replacement of old unserviceable sub main wiring using 2 runs of 2.5 sq mm FRLS, IS 694 PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through and including PVC conduit of suitable size not less than 20mm dia medium grade surface on wall along with 1 run of 2.5sq mm PVC insulated copper conductor FRLS cable as earth lead connected to common earth dolly, including taking down existing u/s wiring and making good the existing disturbed surface using wall putty and matching colour emulsion paint complete all as specified and directed by Engr-in-charge.

All as per item No.07 above but in PVC casing and capping of suitable size complete all as specified and directed by Engr-in-charge.

M&L in replacement of old unserviceable sub main wiring using 2 runs of 1.5 sq mm FRLS, IS 694 PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through and including PVC conduit of suitable size not less than 20mm dia medium grade surface on wall along with 1 run of 1.5sq mm PVC insulated copper conductor FRLS cable as earth lead connected to common earth dolly, including taking down existing u/s wiring and including making good the existing disturbed surface using wall putty and matching colour emulsion paint complete all as specified and directed by Engr-in-charge.

All as per item No.09 above but in PVC casing and capping of suitable size complete all as specified and directed by Engr-in-charge.

Taking down carefully copper/ aluminium point wiring (light, fan and power socket etc) complete including fittings such as switches, ceiling roses, pendent, regulators, sockets, etc including making good the existing disturbed surface using wall putty and matching colour emulsion paint complete all as specified and directed by Engineer-in-Charge.

M&L for color code point wiring FRLS PVC insulated and unsheathed cable with 1.5 sqmm copper conductor single core multistandred 1100 volt grade conforming to IS 694 drawn through PVC conduit of suitable size not less than 20mm dia medium grade, concealed /open as per site requirement with suitable size modular metal flush box fitted with modular cover plate with frame (inner/ outer plate) for mounting switches or sockets regulators etc including FRLS 1.5 sqmm earth wire copper insulated wire connected to common earth dolly including making good the existing disturbed surface using wall putty and matching colour emulsion paint complete all as specified and directed by Engineer-in-Charge. Note applicable for Srl item Nos. 12 to 15:- (i) Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engineer in charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. (ii) Same size wire shall be used for phase, neutral and earth conductor. (iii) The wiring shall be done strictly by following proper colour coding using red , blue, yellow for phase, black for neutral and green for earth leads.

(a) One Light/ fan point controlled by one switch

(b) One 3 pin socket outlet outlet 5 Amps on the same board with other switches

(c) 5 Amps socket point on independent board

M&L for color code point wiring FRLS PVC insulated and unsheathed cable with 1.5 sqmm copper conductor single core multistandred 1100 volt grade conforming to IS 694 drawn through PVC casing and capping suitable size modular metal flush box/PVC box fitted with modular cover plate with frame (inner/ outer plate) for mounting switches,sockets,regulators etc including FRLS 1.5 sqmm earth wire copper insulated connected to common earth dolly including making good the existing disturbed surface using wall putty and matching colour emulsion paint complete all as specified and directed by Engineer-in-Charge.

(a) One Light/ fan point controlled by one switch

(b) One 3 pin socket outlet 5 Amps on the same board with other switches

(c) 5 Amps socket point on independent board

All as per item No.12 here in above but 2.5 sqmm for 6/16 Amps socket on independent board complete all as specified and directed by Engr-in-charge.

All as per item No.13 here in above but 2.5 sqmm for 6/16 Amps socket on independent board complete all as specified and directed by Engr-in-charge.

Supply and fix in replacement of old unserviceable lamp holder, PVC/ Polycarbonate type with back plate suitable to batten fittings, including taking down existing u/s lamp holder complete all as specified and directed by Engr-in-charge.

S&F in replacement of old unserviceable calling bell, ding dong AC 230 Volts, single pole, including taking down existing u/s calling bell complete all as specified and directed by Engr-in-charge.

S&F in replacement of old unserviceable ceiling rose 3 phase/PVC/polycarbonate isolated body, including taking down existing u/s ceiling rose complete all as specified and directed by Engr-in-charge.

S&F in replacement of old unserviceable modular switch one way 6 Amps 1 module including taking down existing u/s switch complete all as specified and directed by Engr-in-charge.

S&F in replacement of old unserviceable modular socket 6 Amps 2/3 pin 2 module including taking down existing u/s socket complete all as specified and directed by Engr-in-charge.

S&F in replacement of old unserviceable modular socket 6 Amps/16 Amps 3 pin 2 module multipurpose including taking down exsting u/s socket complete all as specified and directed by Engr-in-charge.

S&F in replacement of old unserviceable modular switch one way 16 Amps 1 way 1 module including taking down existing u/s switch complete all as specified and directed by Engr-in-charge.

S&F in replacement of old unserviceable modular two way switch 6 Amps 1 module including taking down existing u/s two way switch complete all as specified and directed by Engr-in-charge.

S&F in replacement of old unserviceable modular bell push 6 Amps 1 module including taking down exsting u/s bell push complete all as specified and directed by Engr-in-charge.

S&F in replacement of old unserviceable modular fan step regulator 120w, 2 module including taking down existing u/s fan regulator complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement of old unserviceable 6 Amps 3 pin Plug top including taking down existing u/s plug top complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement of old unserviceable 16 Amps 3 pin Plug top including taking down existing u/s plug top complete all as specified and directed by Engr-in-charge.

S&F in replacement of old unserviceable switch socket combination 6A with PVC box including taking down existing u/s switch socket combination complete all as specified and directed by Engr-in-charge.

S&F in replacement of old unserviceable switch socket combination modular type 16A with PVC box including taking down exsting u/s switch socket combination complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement of old unserviceablemodular white cover plate with frame, 1 module including taking down exisiting u/s cover plate complete all as specified and directed by Engr-in-charge.

All as per item No.30 above but 2 module complete all as specified and directed by Engr-in-charge.

All as per item No.30 above but 3 module complete all as specified and directed by Engr-in-charge.

All as per item No.30 above but 4 module complete all as specified and directed by Engr-in-charge.

All as per item No. 30 above but 6 module complete all as specified and directed by Engr-in-charge.

All as per item No.30 above but 8 module complete all as specified and directed by Engr-in-charge.

All as per item No.30 above but 12/18 module complete all as specified and directed by Engr-in-charge.

Supply and fix in in replacement of old unserviceable modular box suitable for fixing 1/2 module including taking down existing u/s modular box complete all as specified and directed by Engr-in-charge. Note:- The rate quoted for replacing of modular box is deemed to be inclusive of necessary cement/putty work and finishing work of white wash /colour wash to match with existing surface.

All as per item No.37 above but 3 module complete all as specified and directed by Engr-in-charge.

All as per item No.37 above but 4 module complete all as specified and directed by Engr-in-charge.

All as per item No.37 above but 6 module complete all as specified and directed by Engr-in-charge.

All as per item No.37 above but 8/12 module complete all as specified and directed by Engr-in-charge.

S&F in replacement of old unserviceable MCB protected socket PVC plastic base model with one single pole MCB, AC 240 Volts, 20 Amps including making good the existing disturbed surface using wall putty and matching colour emulsion paint including taking down existing u/s MCB, complete all as specified and directed by Engineer in charge.

S&F in replacement of old unserviceable MCB triple pole & neutral AC 415 Volts, 50 Hz , C series 10 kA breaking capacity,40/ 63 Amps including taking down existing u/s MCB complete all as specified and directed by Engineer in charge.

S&F in replacement of old unserviseable MCB single pole 6 to 32 Amps capacity 240 Volts, C series 10 KA breaking capacity including taking down existing u/s MCB complete all as specified and directed by Engr-in-charge.

S&F in replacement of old unserviseable MCB single pole and neutral 32 Amps capacity, C series, 10 KA, 50 Hz ,230 Volts C series 10 KA breaking capacity including taking down existing u/s MCB complete all as specified and directed by Engineer in charge.

S&F in replacement of old unserviseable RCBOs for earth leakage protection 4 pole 30m Amps,63 Amps,415 Volts including taking down existing u/s RCBOs complete all as specified and directed by Engineer in charge.

S&F in replacement of old unserviseable RCBOs for earth leakage protection 4 pole 30m Amps,40 Amps,415 Volts including taking down exsting RCBOs, complete all as specified and directed by Engineer in charge.

S&F in replacement of old unserviceable decorative ultra slim round profile 1 feet 5Watt output lumens greater than 110 lumens/watt,efficiency 110 lumen/watt, life 30000 hrs, surge protection 2.5Kv, power factor > 0.98, THD 20% LED lighting with extruded poly carbonate ready to use pack making connection to existing ceiling rose to fitting with 3 core, 1 sqmm copper conductor including making good the existing disturbed surface using wall putty, including taking down existing u/s 1 feet 5Watt light fitting and matching colour emulsion paint complete all as specified and directed by Engineer-in-Charge. Make:- Havells. Model No. ELITE PRIDE PLUS 5W LED 6000K or equivalent in Philips/Wipro/Havells/Bajaj.

S&F in replacement old unserviceable wall mounted 10 W 2 ft LED batten, out put lumen ≥ 100 lumen/watts, efficacy 100 lumen per watt, life 50,000 burning hrs, aluminum body, surge protection 4kV, power factor > 0.98, THD ≤10%, extruded channel in thermally conductive material for efficient heat dissipation with Polycarbonate diffuser and integrated electronic driver making connection to ceiling rose to fitting with 3 core 1 sqmm copper conductor. Including taking down existing u/s 10 W 2 ft light, complete all as specified and directed by Engineer-in charge. Make:- Crompton model No. CCS-103-10-65-SL-DP-NWH or equivalent in Philips/ Wipro/Havells/Bajaj.

S&F in replacement old unserviceable wall mounted 10 W 2 ft LED Warm batten, out put lumen ≥ 100 lumen/watts, efficacy 100 lumen per watt, life 50,000 burning hrs, aluminum body, surge protection 4kV, power factor > 0.98, THD ≤10%, extruded channel in thermally conductive material for efficient heat dissipation with Polycarbonate diffuser and integrated electronic driver making connection to ceiling rose to fitting with 3 core 1 sqmm copper conductor Including taking down existing 10 W 2 ft light, complete all as specified and directed by Engineer-in charge. Make:- Crompton model No. CCS-103-10-65-SL-DP-NWH or equivalent in Philips/ Wipro/Havells/Bajaj.

S&F in replacement of old unserviceable wall mounted 20 W LED 4ft white batten out put lumen ≥ 100 lumen/watts, efficacy 100 lumen per watt, CRI > 80, CCT >5500k , internal surge protection up to 4kV , power factor > 0.95 having extruded aluminium housing provided for efficient heat dissipation with poly carbonate diffuser and integrated electronic driver with all accessories pre-wired and including connecting up 3 core flexible copper conductor cable suitable size from fitting to ceiling rose/connection terminals Including taking down existing u/s 20 W 4 ft light, all as specified and directed by Engineer in charge. Make:- Crompton model No. CCS-103-20-65-SL-DP-WW or equivalent in Philips/ Wipro/Havells/Bajaj.

S&F in replacement of old unserviceable wall mounted 20 W LED 4ft warm batten out put, lumen ≥ 100 lumen/watts, efficacy 100 lumen per watt,CRI > 80, CCT >3000k , internal surge protection up to 4Kv , power factor > 0.95, THD ≤10% having extruded aluminium housing provided for efficient heat dissipation with poly carbonate diffuser and integrated electronic driver with all accessories pre-wired and including connecting up 3 core flexible copper conductor cable suitable size from fitting to ceiling rose/connection terminals Including taking down existing u/s 20 W 4 ft light, all as specified and directed by Engineer in charge. Make:- Crompton model No. CCS-103-20-65-SL-DP-WW or equivalent in Philips/ Wipro/Havells/Bajaj.

S&F 9 W LED lamp, BEE rated white/warm white with base B22 and including taking down existing u/s lamp all as specified and directed by Engineer in charge.

S&F 9 W LED lamp warm white with base E27 and Including taking down u/s lamp all as specified and directed by Engineer in charge.

S&F in replacement environmental friendly, ultra modern, energy saving, surface mounted, decorative 10 W bulk head edge-lit LED luminaire oout put lumen >100 lumen/watts, efficacy 100 lumen per watt, life 50,000 burning hrs, aluminum body, surge protection 4kV, power factor > 0.98, THD ≤10%, making connection to ceiling rose to fitting with 3 core 1 sqmm copper conductor.and Including taking down existing u/s10 W bulk head complete all as specified and directed by Engineer-in charge. Make:- Jaquar model No. LBLK02X010XN or equivalent in crompton/Bajaj/Havells.

S&F in replacement of 18 W round surface mounted LED panel, Pressurised Die cast Aluminium body Housing and high translucent frosted plastic diffuser with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals out put lumen >110 lumen/watts, efficacy 100lumen per watt, life 50,000 burning hrs, aluminum body, surge protection 4kV, power factor > 0.98, THD ≤10% making connection to ceiling rose to fitting with 3 core 1 sqmm copper conductor including taking existing u/s light complete all as specified and directed by Engineer-in charge. Make:- Crompton model No. LCDSPLN-R-18-CDL or equivalent in Philips/ Wipro/ Havells/Bajaj

S&F in replacement 9W LED spot light ideal for wardrobes, furniture lighting, displays & interior decorations, luminous efficacy ≥ 100/w, CCT ≥ 5500 k,CRI ≥ 80, THD ≤ 10, PF .0.95 including connecting up 3 core copper conductor cable of suitable size from fitting to ceiling rose/connection including taking existing down u/s 9W LED spot light terminals all as specified and directed by Engineer in charge. Make:- Crompton CDR-211-09-30-SL-NWH or equivalent in Philips/Wipro/ Havells/ Bajaj

S&F in replacement decorative wall light (Globe Type ) fixture made up of poly carbonate suitable up to 1 x 10 W LED Bulb (B-22 base ) making connection to ceiling rose to fitting with 3 core 1 sqmm copper conductor including taking existing down u/s wall light complete all as specified and directed by Engineer-in charge. Make:- Havells Model No. LHFOFUE1T21W012 or equivalent in philips/crompton/ Bajaj/Wipro.

S&F in replacement LED flat downlighter 18W white in round profile luminous efficacy ≥ 100/w, CCT ≥ 5500 k,CRI ≥ 80, THD ≤ 10 ,PF .0.95 including connecting up 3 core 1 sqmm copper conductor cable from fitting to ceiling rose/connection terminals, including taking down existing u/s 18w LED flat complete all as specified and directed by Engineer in charge. Make:- Crompton LSCRM-18W-CDL or equivalent in Philips/ Wipro/Havells/Bajaj.

All as per item No.59 above but warm white, CCT ≥ 3000k complete all as specified and directed by Engr-in-charge. Make:- Crompton LSCRM-18W-WW or equivalent in Philips/ Wipro/Havells/Bajaj.

S&F in replacement LED flat downlighter 15W white in round profile luminous efficacy ≥ 100/w, CCT ≥ 5500 k,CRI ≥ 80, THD ≤ 10 ,PF .0.95 including connecting up 3 core 1 sqmm copper conductor cable from fitting to ceiling rose/connection terminals including taking existing u/s down 15W LED flat all as specified and directed by Engineer in charge. Make:- Crompton LSCRM-15W-CDL or equivalent in Philips/ Wipro/Havells/Bajaj.

All as per item No. 61 above but warm white, CCT ≥ 3000k complete all as specified and directed by Engr-in-charge. Make : Crompton LSCRM-15W-WW or equivalent in Philips/ Wipro/Havells/Bajaj.

S&F in replacement LED flat downlighter 12W white in round profile luminous efficacy ≥ 100/w, CCT ≥ 5500 k,CRI ≥ 80, THD ≤ 10 ,PF .0.95 including connecting up 3 core 1 sqmm copper conductor cable from fitting to ceiling rose/connection terminals including taking down existing u/s 12W LED all as specified and directed by Engineer in charge. Make:- Crompton LSCRM-12W-CDL or equivalent in Philips/ Wipro/Havells/Bajaj.

All as per item No. 63 above but warm white, CCT ≥ 3000k complete all as specified and directed by Engr-in-charge. Make : Crompton LSCRM-12W-WW or equivalent in Philips/ Wipro/Havells/Bajaj

S&F in replacement square recess mounted LED edge lit slim downlight with diecast aluminium housing finished in premium white powder coating 6W white luminous efficacy ≥ 100/w, CCT ≥ 5500 k,CRI ≥ 80, THD ≤ 10 ,PF .0.95 including connecting up 3 core 1 sqmm copper conductor cable from fitting to ceiling rose/connection terminals including down taking u/s existing 6W LED all as specified and directed by Engineer in charge. Make:- Crompton LSDEP-6W-CDL or equivalent in Philips/ Wipro/ Havells/Bajaj.

All as per item No. 65 above but warm white, CCT ≥ 3000k complete all as specified and directed by Engr-in-charge. Make : Crompton LSDEP-6W-CDL or equivalent in Philips/Wipro/ Havells/Bajaj.

S&F in replacement square recess mounted LED edge lit slim downlight with diecast aluminium housing finished in premium white powder coating 12W white luminous efficacy ≥ 100/w, CCT ≥ 5500 k,CRI ≥ 80, THD ≤ 10 ,PF .0.95 including connecting up 3 core 1 sqmm copper conductor cable from fitting to ceiling rose/connection terminals.Including taking down existing u/s 12W LED all as specified and directed by Engineer in charge. Make:- Crompton LSDEP-12W-CDL or equivalent in Philips/ Wipro/Havells/Bajaj

All as per item No. 67 above but warm white, CCT ≥ 3000k complete all as specified and directed by Engr-in-charge. Make : Crompton Crompton LSDEP-12W-CDL or equivalent in Philips/Wipro/ Havells/Bajaj

S&F in replacement slim design LED 9W white recessed square polycarbonate housing down lighter with superior luminous efficacy ≥ 100/w, CCT ≥ 5500 k,CRI ≥ 80, THD ≤ 10 ,PF .0.95 including connecting up 3 core 1 sqmm copper conductor cable from fitting to ceiling rose/connection terminals including taking existing down u/s 9W all as specified and directed by Engineer in charge. Make:- Crompton LSDEP-09-CDL or equivalent in Philips/ Wipro/ Havells/Bajaj.

All as per item No.69 above but warm white, CCT ≥ 3000k complete all as specified and directed by Engr-in-charge. Make : Crompton LSDEP-09-WW or equivalent in Philips/Wipro/ Havells/Bajaj.

S&F in replacement slim design LED 9W white recessed round polycarbonate housing down lighter with superior luminous efficacy ≥ 100/w, CCT ≥ 5500 k,CRI ≥ 80, THD ≤ 10 ,PF .0.95 including connecting up 3 core 1 sqmm copper conductor cable from fitting to ceiling rose/connection terminals including taking down existing u/s LED all as specified and directed by Engineer in charge. Make:- Crompton LCDEP-09-CDL or equivalent in Philips/Wipro/ Havells/Bajaj.

All as per item No.71 above but warm white, CCT ≥ 3000k complete all as specified and directed by Engr-in-charge. Make:- Crompton LCDEP-09-WW or equivalent in Philips/ Wipro/ Havells/Bajaj.

S&F in replacement suspended luminairies 36W LED 4 feet with colour temperature 5500K having extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver including 02 Nos suspension kit, CRI ≥ 80,THD ≤ 10 %, Efficacy ≥100 lm/W, Powerfactor ≥ 0.95,Internal surge voltage- 2kv, complete with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals including taking down existing u/s 36W LED 4 feet all as specified and directed by Engineer-in-Charge. Make:- Crompton TRENDZ CCP-133-40-HCL-SL-DWH or equivalent in Philips/ Wipro/Havells/Bajaj.

S&F in repair arcus under water Light 18 watt, hard chrome plated stainless steel with silicon sealed glass, offers colourful illumination for waterbodies in architectural and landscape areas and Including taking down existing u/s water light complete all as specified and directed by Engineer in charge. Make:- Shakti Model No-SZLFSR018W or equivalent in Philips/ Wipro/Havells/Bajaj.

S&F LED 7W wall light and white color (Dimensions 115x115x125 mm) directly on wall including connections with required length of core round copper conductor flex wire making good the damages, colour washing etc as required including taking down existing u/s wall light complete all as specified and directed by Engr-in-charge. Make:- Philips model-Nixon White 1H 7W WW model No.581919 or equivalent Bajaj / Crompton.

S&F in replacement recess full lit luminaire with glare free uniform illumination with longer life and less maintenance 36 W (2 ' x 2 ') in MS housing with opal diffuser with output lumen ≥ 110 lumen/watts, luminous efficacy ≥ 100/watt, CCT > 5500 k,CRI ≥ 80, Power factor ≥ 0. 95,THD ≤ 10 with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/ connection terminals including taking down existing u/s 36 W (2 ' x 2 ') light and including aluminium frame for fitting the same complete all as specified and directed by Engr-in-charge. Make:- Crompton Polaris NIO I-II LCTLRNE-36-FO-CDL or equivalent in Philips/ Wipro/Havells/Bajaj

S&F in replacement surface full lit luminaire with glare free uniform illumination with longer life and less maintenance 36 W (2 ' x 2 ') in MS housing with opal diffuser with colour temp 6000K, output lumen >110 lumen/watts, luminous efficacy-> 100/watt, CCT > 5500 k,CRI ≥ 80,Power factor ≥ 0. 95, THD ≤ 10 with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/ connection terminals including aluminium frame for fitting the same complete all as specified and directed by Engr-in-charge. Make:- Crompton Polaris NIO III LCTLSNE-36-FO-CDL or equivalent in Philips/ Wipro/Havells/Bajaj

Supply & fix in replacement high efficacy 1x1 LED 18 watt surface full lit luminaire with glare free unifrom illumination with longer life and less maintenance and including connecting up with three core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals, luminous efficacy ≥ 100/w, CCT ≥ 5500 k,CRI ≥ 80, THD ≤ 10 ,PF .0.95 all connected accessories with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals, including taking down existing u/s 18 W (1 'x1') light and adjusting rings for fixing etc complete all as specified and directed by Engr-in-charge. Make:- Crompton LCTLSNE-18-FO-CDL or equivalent in Philips/ Wipro/Havells/ Bajaj.

Supply and fix in replacement of flood light for sports facility /building security light 70W output lulmens greater than 100 lumens/watt LED flood light with innovative finless design and excellent thermal management, light distrubution and secondary lenses along with IP 66 better protection better distribution including making connection from existing ceiling rose / connector with 3core 1.5 sqmm copper conductor, including taking down existing u/s flood light complete all as specified and directed by Engineer in charge. Make :-Crompton model Profile NEO LFL-70-CDL/60-M or equivalent Philips/ Havells/Bajaj.

Supply and fix in replacement of flood light for sports facility /building security light 80W output lulmens greater than 100 lumens/watt LED flood light with innovative finless design and excellent thermal management, light distrubution and secondary lenses along with IP 66 better protection, better distribution including making connection from existing ceiling rose / connector with 3core 1.5 sqmm copper conductor, including taking down existing u/s flood light complete all as specified and directed by Engineer in charge. Make:- Crompton model Profile NEO LFL-80-CDL/60-M or equivalent Philips/ Havells/Bajaj.

Supply and fix in replacement of flood light for sports facility /building security light 120W output lulmens greater than 100 lumens/watt LED flood light with innovative finless design and excellent thermal management, light distrubution and secondary lenses along with IP 66 better protection, better distribution including making connection from existing ceiling rose / connector with 3core 1.5 sqmm copper conductor including taking down existing u/s flood light complete all as specified and directed by Engineer in charge. Make :-Crompton model ROVER PRO TFS 504-120-57-60D-SL-GL-NSG or equivalent Philips/Havells/Bajaj,

Supply and fix in replacement of flood light for sports facility /building security light 150W output lulmens greater than 100 lumens/watt LED flood light with innovative finless design and excellent thermal management , light distrubution and secondary lenses along with IP 66 better protection better distribution including making connection from existing ceiling rose / connector with 3core 1.5 sqmm copper conductor Including taking down existing u/s flood light complete all as specified and directed by Engineer in charge. Make:- Crompton model PLUTO NEO PRO LFLN-TFS 150CDL-60-M or equivalent Philips/Havells/Bajaj.

Supply and fix in replacement of flood light for sports facility /building security light 200W output lulmens greater than 100 lumens/watt LED flood light with innovative finless design and excellent thermal management , light distrubution and secondary lenses along with IP 66 better protection, better distribution including making connection from existing ceiling rose / connector with 3core 1.5 sqmm copper conductor including taking down existing u/s flood light complete all as specified and directed by Engineer in charge. Make:- Crompton model PLUTO NEO PRO LFLN-TFS 200-CDL-60-M or equivalent in Philips/ Havells/Bajaj.

S&F 9W LED BEE rated white with base B22 inverter bulb, supply in normal mode and DC supply in inverter mode, with input battery back up of upto 4 hours, high efficiency, high lumes outputwork on AC bulb emergency inverter bulb cool day light/crystal white, including taking down existing u/s all as specified and directed by Engineer in charge. Make:- Shakti Cat No. SZBLB22009-IBB or equivalent in Havells/Bajaj/Crompton.

Supply and fix PVC sheathed 3 core 2.5 sqmm copper conductor 1100 volts grade confirming to IS specification drawn through existing PVC conduit for flood lights including taking down the unserviceable wires as specified and directed by Engr-in -Charge.

Supply and fix PVC sheathed 3 core 4 sqmm copper conductor 1100 volts grade confirming to IS specification drawn through existing PVC conduit for flood lights including taking down the unserviceable wires as specified and directed by Engr-In -Charge.

Supply and fix in repair of rigid non-metallic 25mm PVC casing capping exclusive of wall rawl plugs/Gitti and screw, including making good the existing disturbed surface using wall putty and matching colour emulsion paint, including taking down existing u/s PVC Casing capping complete all as specified and directed by Engr-in-charge.

Taking down and refix after completion of job works for ceiling fan / Exhaust fan / wall mounted fan of any sweep and make by disconnecting the electric connection, dismantling blades, down rods etc for checking and replacing the unserviceable parts complete all as specified and directed by Engr-in-charge. Note:- spare part shall be measured and paid seperately under relevent items.

M & L for checking / replacing the worn out parts such as rubber pully, locking pin, nuts and washer of ceiling fan any size complete with one coat of synthetic enamel white paint by spraying after cleaning all dust etc complete all as specified and directed by Engr-in-Charge.

M & L for painting exhaust fan of any sweep complete with one coat of synthetic enamel suitable paint by spraying after cleaning all dust etc complete all as specified an directed by Engr-in-Charge.

M&L for dismantling / opening the ceiling fan of 1200/1400 mm sweep of any make removing the old defective winding carefully cleaning the inner parts and re-winding with the same gauge super enamelled copper conductor of good insulation, varnishing, drying and reassembling complete all as specifed and directed by Engineer-in-Charge.

M&L for dismantling/opening the exhaust fan of 300mm sweep of metal body any make removing the old defective winding carefully cleaning the inner parts and rewinding with the same gauge super enamelled copper conductor of good insulation, varnishing, drying and reassembling complete all as specified and directed by Engineer-in-Charge.

M&L for replacement of bearing of suitable size for the ceiling fan of 1200/1400 mm including greasing re-assembling complete all as specified and directed by Engineer-in-Charge.

M&L for replacement of bearing of suiatable size for 300mm sweep exhuast fan including greasing re-assembling complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of old unserviecable ceiling fan blade 1200/1400mm sweep as per sample complete all as specifed and directed by Engineer-in-Charge.

S&F in replacement of old unserviecable exhaust fan blade 300/450 sweep complete all as specifed and directed by Engineer-in-Charge.

M&L for removing old unserviceable fan capacitor, supply and fixing new capacitor 2.5mfd 440Volts of suitable make and size, testing the fan including taking down existing u/s capacitor complete all as specifed and directed by Engineer-in-Charge.

M&L for removing defective old capacitor, supply and fix new capacitor of 4 mfd suitable for exhaust fan/Air ciculator of any size, make, model and testing complete all as specifed and directed by Engineer-in-Charge.

S&F in replacement of old unserviecable canopy of matching colour as existing suitable for ceiling fan of any sweep including taking down existing u/s canopy complete all as specifed and directed by Engineer-in-Charge.

M&L for dismantling the existing geyser 25/50 ltrs capacity and transporting to work shop for repair, opening the body carefully and taking out the copper container and arrest the water leakage by bracing/soldering the copper/brass rods and refixing and return back to site and refixing in the existing loccation complete all as specifed and directed by Engineer-in-Charge.

M&L for removing defective old thermostat,Supply and fix in replacement of old unserviecable thermostat 0° C to 80° C for geyser complete all as specifed and directed by Engineer-in-Charge.

M&L for removing defective old element of geyser, Supply and fix in replacement of old unserviecable Geyser element 1500W, Cup type complete all as specifed and directed by Engineer-in-Charge.

M&L for removing defective old element of geyser, Supply and fix in replacement of old unserviceable Geyser element 1500 W, triangular type complete all as specifed and directed by Engineer-in-Charge.

M&L for removing defective old PVC hot water connection pipe, Supply and fix in replacement of old unserviceable PVC Hot water connection pipe 45 cm long complete all as specifed and directed by Engineer-in-Charge.

M&L for removing defective old lamp, supply and fix in replacement of old unserviecable indication lamp square/round in red and green colour, 230 Volts AC complete all as specifed and directed by Engineer-in-Charge.

Disconnect electric connections and taking down carefully unserviceable ceiling light/flood light/ highbay light fittings of different capacities at Nalanda main building/ Aryabhatta/ Bhaskara/ Panini Library/ URU tennies court /badmintion court etc., opening of cover and body for repair/ replacement of electrical items and refixing the same or fixing only new items /fittings including connecting/ testing complete all as specified and directed by Engineer in charge. Note:- Fittings are fitted at 16 to 20 mtr height.The contractor shall arrange ladder/ scaffolding of required height at his own arrangement.The rates quoted are deemed to be inclusive for the above provision.

Repair/replacement, installation & commission of indoor type, wall mounted ( with bolts and unts) meter cabinet of size 1.0x0.9x0.2mtr and made out of 2mm thick CRCA MS sheet with front door having glass window for viewing KWH meter and other door shall be opeque. All door should have neoprene rubber gasket and locking arrengements.The cabinet shall be painted both internally and externally with powder coated paint ( shade : RAL 7032 SIEMENS GEY). The cabinet shall be dust and vermin proof with degree of protection IP 43. The cabinet shall be comprising with following accessories including taking down existing u/s meter cabinet :-

(a) Four pole MCCB, 63 Amps with breaking capacity of 16 KA having adustable thermal and fixed magnetic release. (b) Aluminum bus bar for 3-phase & neutral of current carying capacity up to 200Amps duly mounted on FRP/DMC insulators and necessary drilling for connection and duly covered with heat shrinkable PVC sleeves of standard colour code. (c) Provision of space for fixing existing single phase KWH meters (05 Nos) each separate compartment. Proper colour code shall be maintained. (d) MCB SPN 32 Amps 10KA- 6 Nos ( 05Nos for meters,01 for spare) (e) MCB SPN 10 Amps -02 (1 for security lights & Stair case & 01 for spare) (f) Two way bakelite connector with nut, bolts and wahsers suitable for connecting the outgoing wires in the cabinet-06 Nos. (g) Internal wiring of meters /MCB / Cable connector shall be carried out with 10 sqmm copper conductor unsheathed, multistranded, PVC insulated, 1100volts grade, single core cable of standard colour code for phase & neutral including necessary lugs/ nuts/ bolts /washers etc. (h) LED phase indicating lamps (RYB) with control MCB ( SP-2 Amps)- 3Nos.

S&F in replacement of old unserviceable LED linear batten with smart sensor, inbuilt sensor based smart LED auto dimmable batten, made from industrial engineering grade extruded polymer housing, opaque glare free diffuser, pre wired with all accessories complete all as specified and directed by Engineer-in charge. Make:- Shakti Cat No. SZSLBMX020-iSS or equivent to Crompton/ Havells/ Wipro/ Philips.

Notes:- 1. Fittings are fitted at 10 to 16 mtr height in both indoor and outdoor. The contractor shall arrange ladder of required height at his own source for carrying out work. Necessary safety equipments shall also provided by the contractor under his own arrangement. The rates quoted are deemed to be included for the above provision.Materials /spare parts shall be measured and paid seperately under relevent items of BOQ. 2. The contractor should visit the site before quoting the tender to know the working condition of the station. 3. All requisite safety measures are to be adopted by contractor on site. 4. The contractor shall provide and deploy sufficient electrician ( as approved by GE/ Engineer in charge) shall report at 9.00 hrs to JE E/M / Engineer in charge to collect the complaints job card in working days and complete the same complaint within 24 Hrs. 5. The complaints shall be rectified within 24 Hrs if the complaints is/ are not attended / not completed within 24 Hrs (except repair/replacement of major items) recovery will be done at Rs.500 per complaint per day. 6 For major parts like replacement of MCB DBs, MCCBs should be rectified within 5 working days, if the contractor does not rectify within time then recovery will be done at Rs. 1000 per complaint per day. 7. After completion of job work complaint, the contractor has to produce job card duly signed by user & JE /Engineer in charge. 8 If contractor failed to provide their electrician or attend the complaints then recovery will be done at Rs.1000 per day.

JEETH CONSTRUCTION (BID ID -3156439)

RASNA ENTERPRISES (BID ID -3163175)

MUNEER P (BID ID -3159067)

PADMANABHAN. K.V (BID ID -3158506)