Repairs to 02-cusec capacity, 60 m head horizontal split casing pump to be carried out at Lift Irrigation Scheme Gonipora of MISD Handwara.

Amount

Complete dismantling of single stage horizontal pump by way of disconnecting all leads from the motor and marking the terminals, uncoupling of motor from the pump. Disassembling, dismantling and segregation of various pump parts such as shaft and sleeves, impeller, gland, fasteners, etc.

Complete assembling of single stage horizontal pump after cleaning of all parts throughly with petrol, coupling and alignment with motor, connecting of motor leads and testing on full load.

Mechanical transportation, loading, unloading and handling of pump using appropriate means of transport through a lead of approximately 25 kilometer.

Providing and fitting of ball bearing no. 6308 along with proper and adequate lubrication. SKF or eq. imported bearing.

Manufacturing, providing anf fitting of GM sleeve as per sample.

Rebuilding of pump shaft by way of welding works at excessively worn out places and rebuilding of bearing seats as per requirement and turning and finishing on lathe machine.

providing and fitting of PVC cooling pipes with suitable nipples

Removing of broken/damaged studs/bolts from pump body, boring and tapping along with fasteners of suitable size with nut bolts.

Providing and fitting TC-17 coupling set complete for pumping unit along with flexible rubber tyre. Taking dimensions of prime mover shaft and pump shaft at site and then boring the CI coupling halves as per site requirement on lathe machine at workshop. Complete linear and angular alignment of prime mover and pump shafts for smooth operation including providing and fitting of coupling bolts. Tested pumping unit on full load at site.

Manufacturing, providing and fitting of SS checknuts as per sample.

providing and fittitng of 40 mm dia. forged brass ball valve with suitable nipple to be welded to pipe (Zoloto or equivalent- ISI marked)

providing and fitting of nuts and bolts of assorted sizes

Dismantling of base frame from original installation inside pump house and shifting/draggingand fitting the same outside CGI shed at lower contour . The job involves. Modification and strengthening to base frame by way of cutting/welding works at site for proper fitment of pumping unit .

Assembling of 200 mm dia suction lineand fitting to pumping unit along steep slope at site by enaging labour, tools and tackles

providing of natural rubber gasket for flanged joints 200 mm

providing of natural rubber gasket for flanged joints 150 mm

Repairs to 200 mm foot valve by means of cutting damaged/rusted/worn out bolts The job includes reconditioning of hinges, hinge bolts, weight plate, valve seat, valve body by way of welding, patching, grinding etc. Providing and fitting of rubber insertion cloth replacing the rusted/damaged parts, nuts, bolts, hinges etc as per requirement, cutting the old damaged/rusted MS bars of strainer and providing and fitting of new MS bars. Re-fitting to suction line and testing on full load.

M/s Sopore Engineering Works

MEER ENGINEERS INDUSTRIAL ESTATE SOPORE

SULTAN ENGINEERING WORKS