Loading…
Loading…
Tender Value
₹1.6 L
EMD Value
₹3,923
Closing Date
30 Sept 2026, 5:00 pm2d left
Assistant Conservator of Forest, NSC Kalady
O/o Assistant Conservator of Forest, NSC Kalady, Malayattoor
,Improvements to the ard of yard of ticket counter cum ecoshop at panamkuzhy eco tourism area underNSc Kalady during 2026-2
2026_FD_871426_1
AFDA-100/2026-27
Open Tender
Civil Works - Others
Percentage
45 days
Panamkuzhy
please refer tender documents
5 documents required · 5 mandatory
₹590
₹3,923
19 Sept 2026
19 Sept 2026
5 Oct 2026
19 Sept 2026
30 Sept 2026
19 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | 2.28.1
Surface dressing of the ground including removing vegetation and in-equalities not
exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5
m.All kinds of soil | 53.68 | sqm | 35.29 | ₹1,894.37 |
| 2 | 4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm
nominal size derived from natural sources) | 1.39 | cum | 7,932.89 | ₹11,042.58 |
| 3 | 2.6.1
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means
over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)
including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5
m, as directed by Engineer-in-charge.All kinds of soil | 2.35 | cum | 257.63 | ₹605.95 |
| 4 | 50.6.2.1
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm
or nearest available size confirming to IS 2185 part I of 1979 for foundation and
plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete | 1.06 | cum | 6,831.14 | ₹7,213.68 |
| 5 | 16.91.1
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer
through vibratory compaction by using plate vibrator, filling the joints with sand and
cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern | 44.72 | sqm | 1,169.16 | ₹52,284.84 |
| 6 | 4.1.3
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm
nominal size derived from natural sources) | 1.25 | cum | 9,235.97 | ₹11,544.96 |
| 7 | 50.18.9.6.2
Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 6 Kgf/cm2 | 6.8 | meter | 279.75 | ₹1,902.3 |
| 8 | 4.3.1
Centering and shuttering including strutting, propping etc. and removal of form work
for:Foundations, footings, bases for columns | 4.13 | sqm | 386.16 | ₹1,594.07 |
| 9 | 5.1.2
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and inforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.2 | cum | 10,488.77 | ₹2,055.8 |
| 10 | 5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete upto plinth levelThermo - Mechanically Treated
bars of grade Fe-500D or more | 11 | kg | 112.43 | ₹1,236.73 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.16 MB
TD.pdf
Tender Documents • 0.38 MB
pay.pdf
Other Document • 0.41 MB
prili.pdf
Additional Documents • 0.04 MB
BOQ_1477012.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .