Creation of Patient Friendly Hospital Environment (DME) at Govt Medical College Hospital Thrissur -Fabricating works or rearranging the patient care area in casuality

Amount

: Creation of Patient Friendly hospital environment (DME) at Govt Medical College Hospital Thrissur-fabricating works or rearranging the patient care area in casualty

50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

12.4.2 : Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2

od16831/2019_2020 : Roofing with G.I hard colouur powder coated traffod sheets 0.5 mm thick or nearest available thickness with overlaps of 150 mm at ends and GI hook or crank C.I. bolts and nuts including plain washers and bitumen washers etc complete

50.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

od16832/2019_2020 : Supplying and laying interlocking tile 80mm or nearest size thickness Minimum strength M30- including providing a layer of 6mm aggregate for 5 cm thickness, then laying laying interlock cobbles in lines and level as per the direction of the departmental officers at site inclusive of all cost and conveyance charges etc complete

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

od16833/2019_2020 : Painting Anti fungal/Weather prof external paint of suitable colour using approved quality paint as specified-2 or more coats to new surface

13.84.2 : Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats

od16834/2019_2020 : supplying and fixing 110 mm PVC (4kgf/cm2)pasted to collect rain water

50.18.9.22.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow

50.18.9.22.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend

od16835/2019_2020 : Engaging Fitter (grade 1)

od16836/2019_2020 : Engaging Coolie

Bidder Name

BINOJ C