132 CONSTRUCTION OF PORCH FOR VAIPUR PHC

Amount

PORCH CONSTRUCTION

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

12.4.2 : Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2

12.50 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

od217040/2019_2020 : Designing,faricating,testing,installing and fixing position curtain wall with aluminium composite panel clading with open grooves for linear as well as (br)curvilinear position of the buildingfor all heights and levels etc.including (br)a structure analysis and desighn and preparation of shop drawing for pressure equalisation or rain screen principle as required,proper drainage of water to make (br) watertight including chekking of all the structural functional design. (br)b providing fabricating and supplying and fixing panel of ACP clading in panshade in mtalic colour of aproved shade made out of (br)3mm thick ACP meterial consisting of 3 mm thick FR grade mineral core sandwiched between two aluminium sheets 5 mm thick.the ACP clading sheet shal be coil created with kynar 500 based pvdf/lumination based floorpolymer resin coating of aproved colour and shade on face and 1 and polymwr (service) coating on face 2 as specified using stainless steel screws nuts,bolts ,washers,wether silicon sealand,backer rod etc.The fastening bracket of aluminum alloy 6005 ts/ms with hot with galvanazed with serrations and serratud washers .so arret the wind load,fastnes 316 pin and ancre bolt of aproved make in ss 316 sylicon seperations to prevent bi-metalic condacts all complete required to performs as per specification and drawing .The items includs cost of all materials and labour componant .The cost of all mock lips at site cost of all samples of the individual componants for testing in an aproved laborataries test on the assempld working cirtainwall with ACP cladding cleaning and correption of the curtain wall with ACP cladding till the handing over of the setting for occupation . Base frame work for ACP cladding is included . The shall provide cartain wall with ACP cladding forming all the performance charateristics all complete . As per the architectural drawing as per item description as specifid as per the aproved shope drawing and as directed by the engineer in charge . however the purpose of payment only the actual area on the external face of the cartain wall with ACP cladding shall be messured in sqm up to decimal places.

11.37 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

SURESHKUMAR THONNANPOIKAYIL SATHYANATH

Bidder Name

SONY JOSEPH

SURESHKUMAR THONNANPOIKAYIL SATHYANATH