REPAIRS TO ROOF TREATMENT, CHAJJA, BALCONY, PLASTERING, JOINERY AND OTHER MISC B/R WORKS AT AF-II UNDER GE (AF) JAMNAGAR NO.2

Amount

Demolition of cement concrete (unreinforced) of any description & in any position such as in padding incl existing CM plaster and APP membrane over RCC roof slab & removal of rubbish outside the premises complete all as specified and directed. Note:- work shall be carried upto 2-3 stored bldg, contractor to quote rates accordingly.

Demolition of reinforced cement concrete (including cutting of reinforcement as required to facilitate demolition) in any description and in any position complete all as specified and directed. Note:- work shall be carried upto 2-3 stored bldg, contractor to quote rates accordingly.

Taking down cement plaster on brick /stone wall including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, complete all as specified and directed.

Taking up or down 25 mm bore steel tubing and connections, complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc and hosting if required reconnection and refixing in position, cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipesetc capacity of tank exc 250 & n.exc 500 Ltrs capacity complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc and hosting if required reconnection and refixing in position,cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipesetc capacity of tank exc 500 & n.exc 1000 Ltrs capacity complete all as specified and directed.

Roughening the surfaces of old concrete roof by picking, sweeping, clean and washing down with water to remove dust etc complete all as specified and directed. Note:- work shall be carried upto 2-3 stored bldg, contractor to quote rates accordingly.

M&L for 40 mm thick pcc type B 0, 1:2:4 (using 12.5 mm graded stone aggregate) as in padding in roof over and including brushing neat cement slurry with 3 kg of cement complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregates for platforms / raising of plateforms of water tanks on roof, as in benching / coping, apex stone bed plates, over the level difference in roofs/walls, kerbs etc including all necessary formwork and finishing exposed surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick rendering plastering in CM 1: 4, on concrete surfaces, with WPC as per the manufacturers instructions, finished even and smooth w/o using extra cement complete all as specified and directed. Note:- WPC will be measured & paid seperately.

M&L for applying cold bituminous Primer on plastered roof surfaces with bituminous primer @ 0.3 kg / sqm as per IS 3384 and laying APP (Atactic polypropylene polymer) modified membrane 3mm thick (weight not less than 3.5 kg / sqm with reinforced non woven polyester mat as core reinforcing media suitably finished with mineral laid on top with 100mm side overlap and 100mm width overlap sealing all round as per manufacturer instruction complete after picking sweeping wire brushing and cleaning top surfaces of cement concrete complete all as specified and directed. The membrane has to be laid with LPG torch and overap sealed and finished neat. Note:- work shall be carried upto 2-3 stored bldg, contractor to quote rates accordingly.

Supply only Liquid water proofing compound

M&L 15mm thick cement plaster in cm 1:4 on the brick / concrete surface finished even and smooth without using extra cement complete all as specified and directed.

Supply and fix 20 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor and connecting to water supply pipe line complete all as specified and directed.

Supply and fix 25 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor and connecting to water supply pipe line complete all as specified and directed.

Fixing only 20mm bore steel tubing, medium grade, laid in floor or fixed to walls, ceilings etc. with fittings and fixures including cleaning old pipe, cutting, threading etc complete all as specified and directed.

Fixing only 25mm bore steel tubing, medium grade, laid in floor or fixed to walls, ceilings etc. with fittings and fixures including cleaning old pipe, cutting, threading etc complete all as specified and directed.

S&F in repairs Rotational moulded polyethylene water storage tanks of 500 litre capacity tripple layer. (cylindrical vertical with closed top) hoisted and fixed in position, including all fitting such as connection, nipple etc and dismantling the same complete all as specified and directed.

S&F in repairs Rotational moulded polyethylene water storage tanks of 1000 litre capacity tripple layer (cylindrical vertical with closed top) hoisted and fixed in position,including all fitting such as connection, nipple etc and dismantling the same complete all as specified and directed.

S & F in repairs Gun metal gate valve, with iron wheel head screwed both ends for 20 mm bore pipe complete all as specified and directed.

S & F in repairs Gun metal gate valve, with iron wheel head screwed both ends for 25 mm bore pipe complete all as specified and directed.

S&F in repairs 20mm bore Ball valve high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe fixed complete all as specified and directed.

S&F in repairs 25mm bore Ball valve high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe fixed complete all as specified and directed.

M & L for two coats of weather proof acrylic based emulsion paint (100 % acrylic) over a coat of primer including preparation of new plastered surfaces of wall complete all as specified and directed. Note:- work shall be carried upto 2-3 stored bldg, contractor to quote rates accordingly.

M & L for preparation of old existing treatment surfaces on wall and applying one coat of of weather proof acrylic based emulsion paint (100 % acrylic) over a coat of primer including preparation of old surfaces complete all as specified and directed. Note:- work shall be carried upto 2-3 stored bldg, contractor to quote rates accordingly.

M&L for repairing the edge / corner of chajja / roof projection and similar work by removing of plastered width / girth exceeding 15 cm & n exc 30 cm and making good with 15 cm rendering in cement mortar 1:3 to match with existing surfaces complete all as specified and directed. Note:- work shall be carried upto 2-3 stored bldg, contractor to quote rates accordingly.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

M&L for Pre-cast cement concrete type C1,1:3:6, (using 20 mm graded stone aggregate) solid blocks , exc. 10 cm thick, in width (with plain and interlocking joints as directed) setting in cement mortar 1:6, complete in walls & pillars complete all as specified and directed.

Cutting grooves in brick / stone wall ,75mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

Taking down chowkats or frames n exc 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description n exc 1sqm each.

Taking down shutters of any description exc 1sqm but n.exc 2.00 sqm each.

M & L for 2nd class hard wood Plain, solid, straight chowka and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned a joints, supplied and fixed complete all as specified and directed.

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 30 mm thick second class hardwood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass / gauge, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkhats complete all as specified and directed.

M&L for factory made 25 mm thick Glazed and skeleton shutters,2nd class hardwood, open rebated and prepared to receive glass, gauze, etc. with edges of sash bars and framing moulded, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

Fixing only Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. Note: The fixing shall be carried only after making necessary repairs such as welding, hinges replacement etc. No extra cost shall be admissible on this account.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F solid PVC door frame of size 50mmx 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and & sketch shown in section 8 of SSR part-I complete all as specified and directed.

S&F Factory made solid PVC moulded door shutter 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, suppling & fixing in the frame at site as per specification complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc. 0.5 sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed in position, complete all as specified and directed.

S&F in repair stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed to aluminium window sliding / fix type or wooden door / window including rubber bead joining cleat for fixing in position, complete all as specified and directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M & L for cutting holes n exc. half brick in brick walls built in cement mortar or cement lime mortar and stone wall for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 including demotion old PCC as required complete all as specified and directed.

Supply fabricate & fix in position aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) three track window ( two shutters glazed & one shutters wiregauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concelled type lock for all three shutter, PVC roller etc all as specified below, including taking down old window complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm (Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm (Section No 20832) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 mm (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 mm (Section No 20737) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 mm (Section No 20736) Note: Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B

S&F aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) ventilator, partialy glazed and partialy louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.70 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portaion louvers of 80 mm wide & 4 mm thick frostade glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aparture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator complete all as specified and directed. Note: (i) Section No given above are of make Jinal, Contractor may use similar section of other make mention in Appx B.

S&F Stainless steel curtain rods of 25mm dia including taking down the existing complete all as specified and directed.

S&F SS ornamental stainless steel holding brackets for 28mm dia scurtain rods complete all as specified and directed.

S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets, fix in platform and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. Make:- Diamond, Nirali, Prayag, Parryware, Phoenix

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. Make:- Diamond, Nirali, Prayag, Parryware, Phoenix

S & F in repairs 150mm long aluminium handle cast type anodised complete all as specified and directed.

S & F in repairs 75mm long Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F in repairs 75 mm size Stainless steel butt hinges medium weight, fixed to chowkhats complete all as specified and directed.

S&F in repairs 100 mm size mild steel butt hinges medium weight, fixed to chowkhat complete all as specified and directed.

S & F in repairs 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F in repairs 75 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F in repairs 300mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) of size 300 mm and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F in repairs floor door stopper 140 mm cover plate of aluminium alloy body, double leg type with hard rubber shoe fixed to door complete all as specified and directed.

M&L for Preparation of old painted wooden surface of any description not otherwise described over 10cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparation of new wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over pink prime including preparation of new wooden surface complete all as specified and directed.

M&L for preparation of old painted of steel or iron surfaces of any description not otherwise described over 10cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed.

M&L for preparation of newly or untreated steel or iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms), 5mm thick & 12cm wide with railing complete all as specified and directed.

S& F 18 / 19 mm thick plywood (12 Nos of ply) grade BWR, type BB fixed with screws to timber frame work or ply wood including 20 x 3 mm teak wood lapping on edge including taking down old plywood complete all as specified and directed.

S& F 12 mm thick plywood (07 Nos of ply) grade BWR, type BB fixed with screws to timber frame work or ply wood including 12 x 3 mm teak wood lapping on edge including taking down old plywood complete all as specified and directed.

M&L for 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F second class HW plain fillets, square / rectangular, wrought face of sectional area n.exc 3 sqcm, securing with screw complete all as specified and directed.

S&F 25 mm size magnetic catcher with Plastic body and striking plate including letting in and fixed complete all as specified and directed.

S&F in repairs kitchen basket perforated type fabricated with stainless steel section (SS-304), best quality of size 450 mm x 500 mm x 100 mm for different use such as placing plain plate / dish / cup & saucer /cutlery / thali etc fixed in position with one pair telescopic Channel mild steel chromium plated, roller type, heavy duty complete all as specified and directed.

S&F in repairs kitchen basket perforated type fabricated with stainless steel section (SS-304), best quality of size 450 mm x 500 mm x 150 mm for different use such as placing plain plate / dish / cup & saucer /cutlery / thali etc fixed in position with one pair telescopic Channel mild steel chromium plated, roller type, heavy duty complete all as specified and directed.

S&F in repairs kitchen basket perforated type fabricated with stainless steel section (SS-304), best quality of size 450 mm x 500 mm x 200 mm for different use such as placing plain plate / dish / cup & saucer /cutlery / thali etc fixed in position with one pair telescopic Channel mild steel chromium plated, roller type, heavy duty complete all as specified and directed.

S&F stainless steel kitchen plate rack of size 31" x 30" x 10" deep, fabricated with 0.63 mm sheet fixed in position on wall complete all as specified and directed. Make:- Silver Shine model No KPR-314 or equivalent of make specified in Appx 'B'

S&F corner, two door, with shelves, made of ABS with glossy finish of size 280 wide x 360 mm deep x 590 Height for bathrooms fixed with screws as per manufacturer instruction complete all as specified and directed. Make : Nilkamal

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F Sheet glass ordinary quality in squares n.exc 0.50 sqm each pane 4 mm thick,glazing with oil putty or glazing clips complete all as specified and directed.

Supply and fixed sheet glass, ordinary quality, in squares/rectangular shape n exc 0.5 Sqm each pane of 4.8mm thick

Supply and fixed sheet glass, ordinary quality, in squares/rectangular shape but exc 0.5 Sqm each pane of 4.8mm thick complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description by cutting or without damage of structure not otherwise provided for complete all as specified and directed.

S&F mild steel framed work such as grills gratings etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walkways railings framework of water tanks and similar work conforming to Fe 290 Grade E-165 complete all as specified and directed.

Dismantling of granite, marble or kota stone slabs and granite tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or plateform etc complete all as specified and directed.

M&L for Granite work not less than 18 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade, laid over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

M&L for rounding to edges of Granite/ Kota stone slabs one edge, such as in steps cooking plateform, and other similar situation complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with need cement slurry, laid over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

KEVAL ENTERPRISE

EVEREST BUILDERS

Suraj Builders

J J ENTERPRISES