Widening and strengthening work of Sampoornanagar Murainagaudhi Road (O.D.R. PBT-02) under the State Road Fund in Financial year 2023-24 in district Pilibhit

Amount

Scarifying the existing bituminous surface to a depth of 50 mm and disposal of scarified material with in all lifts and leads upto 1000 metres as per MORTH Specification section 300, 500 etc. complete in all respects.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thicknessas per MORTH Specification section 200 complete in all respects.

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 of MORTH specifications, as per MORTH Specifications section 300 complete in all respects.

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 of MORTH specifications, as per MORTH Specifications section 300 complete in all respects.

Construction of granular sub-base Grading 1 by providing close graded Material Lalkuan Quarry, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, as per section 400 of MORTH specifications complete in all respects. In two layers.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying With 1% OPC grade cement and 3.5% Emulsion (Hincol) in uniform Single layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density, as per MORTH Specification section 400, 500, relevant IRC Codes and UP PWD Circulars issued from time to time, complete in all respects.

Providing and laying dense graded bituminous macadam Grading 2 with 80 - 100 TPH capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 (IOC/HPCL) @ 4.5 per cent, mini., by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification section 500 complete in all respects.

Providing and applying tack coat with VG-10 (IOC/HPCL) using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom, as per MORTH Specifications 500 complete in all respects.

Providing and laying bituminous concrete Grading 2 with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 (IOC/HPCL) @ 5.4 per cent, mini., of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specifications 500 complete in all respects.

Compaction of Excavated earthwork from widening of roadway cutting. Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 of MORTH specifications, as per MORTH Specifications section 300 complete in all respects.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved materialas per MORTH Specification section 200, 300 complete in all respects.

PCC Grade M15 Using Batching Plant complete in all respects as per MORTH specifications Section 1700, 1000, 2100, 2200, 2300

Sand Filling in Foundation Trenches as per Drawing & Technical Specification section 300 complete in all respects.

Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications section 1300 complete in all respects.

Brick Masonry Work in Cement Mortar 1:3 in Substructure complete excluding Pointing and Plastering, as per Drawing and Technical Specifications section 1300 complete in all respects.

Supplying and Laying of Compacted 40 mm gauge brick ballast around and below Hume Pipe comlete in all respects as per specifications section 2800, 2900 etc. complete in all respects.

Providing and Laying of 1000 mm dia RCC Hume Pipe NP-3 Class etc. Complete in all respects as per Technical specifications section 2900, 2800 etc.

Providing and Laying of 350 mm dia RCC Hume Pipe NP-3 Class etc. Complete in all respects as per Technical specifications section 2900, 2800 etc.

Pointing with cement mortar (1:3) on brick work in substructure as per Technical Specifications Section 1300 & 2200 etc.

Reinforced Cement Concrete grade M-25, complete in foundation all respects as per Drawings and MORTH Technical Specifications Section 1700, 1000, 2100, 2200, 2300 etc. using Batching Plant.

Reinforced Cement Concrete grade M-25, complete in Superstructure/ Slab all respects as per Drawings and MORTH Technical Specifications Section 1700, 1000, 2100, 2200, 2300 etc. using Batching Plant.

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement (Sail/Tata/JSPL) in Foundation complete as per Drawing and Technical Specifications section 1600 complete in all respects.

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement (Sail/Tata/JSPL) in in Substructure complete as per Drawing and Technical Specifications.

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drainage face complete as per drawing and Technical Specifications Section 2700 & 2200 etc.

Providing Cost of dewatering I/c cost of boaring,laying of 4" dia P.V.C.pipe ,hire charges of 7.50 K.V.Deisel pumping set ,hire Charges of P.V.C. pipe & cost of 4" dia plastic pipe for disposal of water as required distance also I/c wages of repairing leakage during operation with hire charges of tractor I/c loading & unloading pumping set complete in all respect to carry out various activities of foundation work etc. conforming to and to the requirements of section 300, 2100, 2400, 2900 as the case may be.

Plastering with cement mortar (1:3) on brick work in sub-structure as per Technical Specifications. As per MORTH Specification section 1300 & 2200 complete in all respects.

Brick soling with straight over burnt bricks laid on edge and dry including preparation of subgrade to prescribed camber and including supply of bricks, filling joints with local earth, spreading blinding coat of 1 cm (3/8") depth of local earth of P.I. 5 to 7 or sand over the entire surface and including labour and T&P etc. required for proper completions of the work.(S.N.762b)

SHAKUNTALA SINGH

MAHENDRA SINGH

Jagdish Saran