Tender for Rate contract of Maintenance, Repairing and SITC of Decorative Lighting Works As and When Required at East & West side Riverfront premises of SRFDCL (Limit up to Rs.30.00 Lacs)

Name of Work:- Rate contract for Maintenance, Repairing & SITC of Decorative Lighting Works As and When required at East & West side

Riverfront premises of SRFDCL (Limit up to Rs.30.0Lac)

FINANCIAL BID SUMMARY

Sr. No. Description Amount (in Rs.)

1 PART-A SITC OF Decorative lighting work ₹

2 PART-B Manpower Cost ₹

Total Amount (Part A + Part B) ₹

Total Amount (Part A + Part B) ₹

Total With GST ₹

I/We am/are willing to carry out work at_________________%above or __________% Below the estimated cost mentioned above.

The amount of my/our tender works out as under Estimated cost put up to tender:- Rs.28,99,856.0

Add__________% Above:-Rs.____________OR :-Deduct___________%Below:-Rs.___________

Net Amout in Rs(After Additional/deduction):- ______________________________

NOTE:- (1)The Quoted Rate shall be Inclusive of all taxes GST.

Part A - SITC of Decorative Lighting Work

NAME OF WORK:- Rate contract of Maintenance, Repairing & SITC of Decorative Lighting Work at East &

West side Riverfront premises of SRFDCL

SR NO Description QTY Unit Basic Rate (Rs.)

B SITC of Decorative Lighting Work

1 Providing and erecting Mains with ISI marked,1.5KV grade electrolyte

multi stranded,annealed copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of

copper lugs, nuts and bolts if required

1.1 (a) one wire 1.0 Sq.mm 1 Mtr.

1.2 (b) one wire 1.5Sq.mm 1 Mtr.

1.3 (c) one wire 2.5Sq.mm 1 Mtr.

1.4 (d) one wire 4.0 Sq.mm 1 Mtr.

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size of

2.1 4 core 10 Sq. mm 1 Mtr.

3 Supplying & erecting OF RGBW FLOOD LIGHT

Supplying & erecting of RGB REMOTE OPERATED FLOOD LIGHT

WITH INBUILT DRIVER

5 Supplying & erecting of SINGLE COLOR FLOOD/FOCUS LIGHT

6 SITC of Decorative Lighting Work

6.1 RGB Silicon Profile Light with necessery accessories. 1 Mtr.

6.2 Pixel Silicon Profile Light with necessery accessories. 1 Mtr.

6.3 RGB PIXEL LED Light 1 No.

7 Supplying & erecting of RGB FLOOD LIGHT

8 Supplying & erecting of RGB SS BODY FOUNTIAN LIGHT

9 27W RGB SS BODY NOZZEL FITTING FOUNTAIN LIGHT 1 No.

10 POWER SUPPLY FOR RGB FLOOD LIGTH 350W 1 No.

11 POWER SUPPLY FOR PIXEL LED 350W 1 No.

12 POWER SUPPLY FOR FOUNTAIN LIGHT 350W 1 No.

13 POWER SUPPLY FOR ADDRESSABLE LIGHT 10W 1 No.

14 SIGNAL DRIVER FOR RGB LIGHTS 350W 1 No.

15 SIGNAL DRIVER FOR RGBW LIGHTS 350W 1 No.

16 RGB CONSTANT CURRENT DECODER 45W 1 No.

17 RGB ADDREESABLE SIGNAL DRIVER 45W 1 No.

18 RGB PIXEL AMPLIFIER SET 350W 1 No.

19 3 CHANNEL RGB DMX CONTROLLER 1 No.

20 6 CHANNEL RGB DMX CONTROLLER 1 No.

21 9 CHANNEL RGB DMX CONTROLLER 1 No.

22 12 CHANNEL RGB DMX CONTROLLER 1 No.

23 RGB ADDRESSABLE DMX CONTROLLER 1 No.

24 PIXEL PROFILE WITH LENSE 56 PIXEL PER METER 1 No.

25 Supplying & erecting of LINEAR WALL WASHER SINGLE COLOUR

26 Supplying & erecting of LINEAR WALL WASHER RGB LIGHT

26.6 750MM 40W RGBW 1 No.

26.7 1000MM 40W RGBW 1 No.

27 Adaptor for Silicon Profile Light 1 No.

Supplying & erecting IP 55 grade following size section pillar

fabricated from joint less M.S. Sheet with angle iron legs made from

jointless M.S. Angle with cable clamps to be buried in ground to have

appropriate erection to work uniform until erected with cement

concrete foundation and 45 cm high bricks work finishing with plaster

etc. hinged double door internally supported on both side, with

internal and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and

28 other with nut and bolt for erecting Bakelite sheet. Painting the 1 No.

Section Pillar inside and out side with three tank powder coated

paint. section pillar roof should be without joint with water leakage

proof & tested as per IP 55 test & followed by IS 2147 of

(B) 75 X 60 X 45 cm section pillar fabricated from 16 Gauge MS Sheet

with angle iron legs 45 cm long made from 35 X 35 X 5 mm thick MS

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

29 with necessary PVC fittings & Junction boxes fixed with adhesive 1 Mtr

solution & Clamps with following dia of pipes, in approved manner as

Supplying & erecting power contactor, AC3 duty for time switch

30 complete erected as per direction 1 No.

Cat III - 2 Pole 250V 12 Amp.

RGB Control Panel inclu. Control wiring,backe lite sheet,PVC race

31 way,fan,Push botton,Terminals and req.accessories (Size:- 580 x 670 1 No.

RGB Control Panel inclu. Control wiring,backe lite sheet,PVC race

32 way, fan, Push botton, Terminals and req.accessories (Size:-650 X 670 1 No.

RGB Control Panel inclu. Control wiring,backe lite sheet,PVC race

33 way,fan,Push botton, Terminals and req.accessories PANEL BOX 1 No.

COST (Size:- 1080 X 670 X190 mm)

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B

34 curve) having 10KA breaking capacity & confirms to IS :8828 in 1 No.

existing box having following capacity(a) 6 to 32 Amp.Cat.III

Providing & erecting 240 V MCB double pole switch for lighting Load

35 (B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in 1 No.

existing box having following capacity (a) 6 to 32 Amp.Cat.III

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover.(approved make OEM has to submit test

36 certificate) & having back filling compound of (B) Inner chemical 1

(CCM Compound)-Resistivity:- 0.2 ◻/ meter testing as per IEC 62561-

2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound:- Earthing compound should be capable

to retain moisture for long time Necessary test report must be

submitted. (b)For Electrical installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs

Back filling Compound :1 no. Bag of 25 Kg.

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16

Supplying & erecting approved make LAN cable of following size in

existing pipe as per direction CAT -

Supplying & erecting approved make Digital time switch having

lithium cell 6 years operative and operate battery backup 1 channel

day clock with 14 memory programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum switching setup time

minimum & LCD display. Also comprised permanent ON/OFF

switching. Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as required

with necessary connection erected as directed.

Supplying and erecting HYLAM sheet on existing angle iron frame for

following thickness

40.1 (A) 2mm 1 Sq.mtr

40.2 (B) 4mm 1 Sq.mtr

40.3 (C) 6mm 1 Sq.mtr

Drilling the road without breaking the road surface (Asphalt) for

41 laying of cable for feeding power supply by making up to following

size of holes at both ends complete.

41.1 (A) Up to 100 mm bore dia 1 Mtr.

41.2 (B) Up to 150 mm bore dia 1 Mtr.

42 Febrication Work including colour with primer as per site requirment 1 Kg

43 3mm SS lesser cutting sheet 1 Sq.ft.

44 Installation of fabricated ceiling structure 1 Sq.ft.

45 Diffuser sheet as per site requirement 1 Sq.ft.

Making trench in soft soil of suitable width of 90 cm deep for laying

46 cable or locating the fault all over the run and back filling the same 1 Mtr.

and making the surface as normal ground.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm

or required depth for laying any size of cable or locating the fault all

over the run and back filling the same and making the surface as

47.1 (B) If additional machinery like hammer driller or JCB use [Add] 1 Mtr.

Acrylic LED logo/elements (size 24" x 24") 3mm UV Printed 2.5"

embossed logo,5mm PVC back tray for LED,1.5W LED with 3 year

warrenty,SMPS with one year warrenty with LED Font as per

49 Any kind of Light Fixtures (Basic rate Rs.5000/-) 1 No.

50 Any kind of Light Fixtures (Basic rate Rs.10000/-) 1 No.

51 Any kind of Light Fixtures (Basic rate Rs.15000/-) 1 No.

52 Any kind of Light Fixtures (Basic rate Rs.20000/-) 1 No.

53 To attend the fault related to programing of Structure/Building 1 Job

54 To attend the cleaning work of Decorative lighting per person per day 1 Job

Supply of Pathway Light Dynamic RGB lighting for outdoor use,

Reliable and easy to install, Minimal heat output, Suitable for

56 completely outdoor use with having IP65 ingress protection, wattage 1 No.

of the Light should not exceed to 3-5W with controller and Drivers.

with require civil work included

SITC of edging cobblestone block structure with LED Illumination,

outer body should be made of FRP, should be more durable., Size

should be 6"/7"/8" and 4"X4" or as per

57 site condition, Input voltage should be DC12/24V/AC 220V, Safety 1 No.

class (EN 61140): III, ingress rotection rating (DIN EN 60529): IP65,

impact resistance level should be

suitable to site condition. with require accesories

Supply of 10/12W customised LED bollard light using theme of

heritage/department logo/or any other design, CCT: WW /NW / CW,

58 BA: Symmetrical, Outdoor whether proof IP65, CRI >80, design should 1 No.

be approved by department

Supply of Homogeneous Dot free LED Flexible Linear Light with high

quality circuit design for stable and reliable performance, surface

material should be made of Silicon with aluminium extrusion linear

profile and other connecting accessories, Surface mounted flexible

linear light suitable for facade edge lighting, Symmetric distribution.

luminaire should have diffuse silicone based cover for soft

illumination. Linear luminaire should have lumen flux in range of 900-

1000 lm per meter, Rated input supply of DC 24V constant voltage

with external LED Driver, External ballast as accessory must be

provided separately, Output color should be in range of 2700-3000K

color temperature, The luminaire should have versatile optics : 120⁰,

59 Mean rated service life L70(tq 25 °C) = 50,000 h. Luminaire body of 1 Mtr

aluminium extrusion with aluminium components. With flush-fitting

cover and integral LED unit. Colour of luminaire body Grey/Silver,

highly weather resistant/ powder-coated. Ingress protection rating

(DIN EN 60529): IP68, impact resistance level should be suitable to

site condition. The LED system with control gear unit is suitable for

operation on direct voltage supply grids. The luminaire should be

provided with Electrical safety class I. Power Efficiency : >85%,

Operating Temperature - 10°C to +55°C, Operating Humidity : 10%-

90%, Housing to have adjustable base bracket for angle adjustment

so that the light direction can be adjusted to illuminate desired

structural elements,

SITC of Metal Fabricated innovative, decorative,

atttractive sculpture/model /Structure as instruction and

site requirement instructed by engineer in charge or

consultant/Architect with required necessary powder coating,color

in sheet metal , Pipe, box,angle etc , The scope includes necessary

fastners,necessary civil works for installation, laser,CNC cutting

Powder coating ,bending etc. (Department can demand any type of

61 Metal Steel Sculpture/ structure as per design.

Size upto 1x1x1 mtr (LengthxWidthx Height) 1 Sq mtr

Size upto 1.5x1.5x1.5 mtr (LengthxWidthx Height) 1 Sq mtr

Size upto 2 x2x2.5 mtr (LengthxWidthx Height) 1 Sq mtr

Size upto 2.5x2.5x3 mtr (LengthxWidthx Height) 1 Sq mtr

SITC of Korean /ACP/Acrylic/Metal/Wood material's illumination

work including laser cut , frameing ,lighting /signages as per

instructed bty engineer in charge.Note ;- The scope includes

necessary fastners,Civil works, laser,CNC cutting , Powder coating

,bending etc. (Department/Consultant/ Client demand any type of

62 Sculpture/ structure as per design.

Size upto 2x2x2 Feet (LengthxWidthx Height) 1 Sq.feet

Size upto 2.5x2.5x2.5 Feet (LengthxWidthx Height) 1 Sq.feet

Size upto 3.5 x3.5x3.5 feet (LengthxWidthx Height) 1 Sq.feet

Size upto 5x.5x10 feet (LengthxWidthx Height) 1 Sq.feet

SITC of Ceiling mounted Circular Lighting Elements

SITC of shatter proof outdoor suitable LED bulb, input voltage 220V

64 ac, Lamp efficiency 80 Lm/w, life span 2000 hours, CCT 2700k/2200k, 1 No.

power 23 watt Each bulb, base type E27/26

65 Supply and Installation of IP 65 T junction and weather proof holder 1 No.

66 SITC of Mini 500mm dia PC body balls with LED lighting 1 No.

67 SITC of LED linear Strip light 1 Mtr

68 SITC of 2 C x 0.5 sq.mm wire 1 Mtr

Total Amount of SITC Work(PART-A)

Total Amount of SITC Work(PART-A)

Part B - Manpower Cost

NAME OF WORK:- Rate contract of Maintenance, Repairing & SITC of Decorative Lighting Work at East & West side Riverfront

premises of SRFDCL

Item Total Amount for

Item Total Amount for

Discription Unit Per person per

No. 2 years (Rs.)

Providing of all Man power, labour (Including reliever to ensure presence of

specified type and no. of manpower, as applicable) along with administration

& management charges including running office, cost of Workmen No. 21,974

compensation, Insurance Policy etc. labour for testing, repairing and

maintenance of equipments works for one Month of tender works

1 No. Electrician (ITI Electrician / Wiremen)

1 No. Helper (10th & 12th Pass) No. 21,481

Total Part B Amount (Rs.)