Providing to Street lights & High Mast on Vyara Bhenskatri Road, Ta: Vyara, Di-Tapi

Name of work : Providing to Street lights & High Mast on Vyara Bhenskatri Road,Ta:Vyara,Di-Tapi

DESCRIPTION TENDER RATE

Qnty. Unit Rate in Rate in Per Amount

Providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC - 227 Rupees Seventy

1A 112 Mtrs. erected in existing pipe of following size (Specifically for 70.70 And Paise Mtr.

control panel, relays, power switchgears, motor starters & Seventy Only

control wiring) with required size of copper lugs, nuts and bolts

if required.(e) One wire 6.00 sq. mm

(g) One wire 16.00 sq. mm

1B 24 Mtrs. 177.76 Seventy Seven Mtr.

Seventy Six Only

Supplying and erecting Flexible PVC insulated multi strand

multi core 1.1 kv grade ISI marked copper wires of following

size to be erected as directed. (e) 1.50 Sq.mm 3 core round Rupees Fifty

2A 1152 Mtrs. PVC sheathed 58.58 Eight And Paise Mtr.

Fifty Eight Only

(k) 4.00Sq.mm 4 core round PVC sheathed Rupees Two

2B 198 Mtrs. 221.19 Twenty One Mtr.

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD <

10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > Rupees Six

85 %.( fittings required LM-79 & LM-80 certificates) (The Thousand Five

3A 45 Nos. manufacturer of LED fitting must possess in-house laboratory 6566.01 Hundred Sixty Ea.

accredited by NABL. A valid copy of the NABL accreditation Six And Paise

certificate, along with the detailed annexure specifying the

relevant scope of testing for LED luminaires, must be

submitted) (NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A)

Street Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage protection.

(iv) above 90 to 120 watts Cat-lll

(B) Flood Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

3B 66 Nos. protection. (vii) above 200 to 250 watts cat-III 10818.11 Ea.

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV. to Rupees One

be laid on wall with necessary clamps or in existing trench / Hundred Forty

pipe of following size of cables (C) 4 core 10 Sq. mm 140.39 And Paise Mtr.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be laid Rupees Two

on wall with necessary clamps or in existing trench / pipe of Hundred

5 525 Mtr. following size of cables (B) 3 1/2 core 35 Sq. mm ( 16 Sq. 220.18 Twenty And Mtr.

mm 1/2 core) Paise Eighteen

Providing and, fixing heavy duty flange type brass double

compression type cable gland with rubber ring for PVC Rupees Seventy

6 18 Nos. insulated armoured cable complete with out going tails, 75.75 Ea.

insulating tape etc for following size of cables.(B) 3 & 1/2 core

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high Rupees Fifteen

7 18 Nos. pressure tool & connected to switchgear terminals with 15.15 And Paise Ea.

brass/cadmium plated nut bolts in an approved manner. (C) Fifteen Only

(D) 35/50 Sq.mm. Rupees Twenty

7a 162 Nos. 20.20 And Paise Ea.

Providing & erecting weather proof, dust & vermin proof, floor

mounted front operated outdoor type double door cubical

panel board necessary IP-54 and above protection as per

approval from engineer incharge made from 14 SWG thick

CRC M.S. sheet for outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with necessary accesories

supporting angles/ flats channel including cutting, bending,

drilling, welding, riveting with internal partitions & cable alley

as per requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-aluminium strips,

rubber grommets, rib, bakelite control fuses/MCB for Thousand Four

Sq.Mt measuring instruments, earth bus & earth bolts, foundation Sq.Mt

8 3 11466.53 Hundred Sixty

r flange - bolts-base Plates, sufficient nos. of hinged doors, r

handles with locking arrangement and rubber gasket,heavy Fifty Three Only

duty end terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be painted

with epoxy powder coating. (The rates excludes the cost of

switchgears, bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall be supplied

with following approved manufacturers with following size. (A)

locally fabricated panel board (i) with 350 mm depth

Supplying & erecting IP 55 grade following size section pillar

fabricated from joint less M.S. Sheet with angle iron legs

made from jointless M.S. Angle with cable clamps to be buried

in ground to have appropriate erection to work uniform until

erected with cement concrete foundation and 45 cm high

bricks work finishing with plaster etc. hinged double door

internally supported on both side, with internal and outside Rupees Three

looking arrangement with look and keys in duplicate 35 x 35 x Thousand Five

9 13 Nos. 5 mm M.S. Angle of Two Nos. one is welded and other with 3595.60 Hundred Ninety Ea.

nut and bolt for erecting Bakelite sheet. Painting the Section Five And Paise

Pillar inside and out side with three tank powder coated paint. Sixty Only

section pillar roof should be without joint with water leakage

proof & tested as per IP 55 test & followed by IS 2147 of

(B) 75 X 60 X 45 cm section pillar fabricated from 16 Gauge

MS Sheet with angle iron legs 45 cm long made from 35 X

X 5 mm thick MS angle.

Supplying and erecting HYLAM sheet on existing angle iron

frame.for following thickness (C) 6mm

10 13 Nos. 1156.45 Hundred Fifty

Forty Five Only

Supplying and erecting triple pole & neutral 440V / 500V panel

mounting Copper Busbars with four equal Nos. of electrolyte

bus having current density not more than 1.6 Amp. / sq.mm Rupees One

(Rated current / cross section area) duly wrapped with colour Thousand Nine

11 2.4 insulating tape for phase sequence of following current 1961.42 Hundred Sixty

carrying capacity, erected with necessary bus bar supports One And Paise

/insulators, main cable socket to each bar, erected in existing Forty Two Only

cubical panel with necessary connections. (A) Suitable for

100 Amp. Capacity

Supplying and erecting approved make panel mounting type

Digital Voltmeter having 3 digits LED display, 0 to 750 AC

Volts range erected on existing panel board with all

12 3 Nos. connection, wiring etc .with manufacturers calibration 1275.63 Seventy Five

certificate. And Paise Sixty

Supplying and erecting approved make panel mounting type Rupees One

Digital Ammeter having 3 digits LED display, external CT Thousand Five

operated, calibrated for 0 to 1000 Amps suitable to operate on Hundred Fifty

500 Volt AC , erected on existing panel board with all

1558.43 Eight And Paise

connection, wiring etc .with manufacturers calibration Forty Three

certificate. Only

Providing & erecting L.T. Current Transformer with bar

primary 50/5 to 1000/5 ratio 15 VA burden erected in existing

14 9 Nos. CRCA box duly secured with insulating materials connected to 274.72 Ea.

the meter Seventy Two

Supplying and erecting Ammeter / Voltmeter selector switch Rupees Three

15 6 Nos. for 3 phase AC Supply 500 V on existing panel board with 317.14 Ea.

necessary connections. Seventeen And

Providing , erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections complete Rupees Seventy

Seven And Paise

16 295 Kg. with cutting, welding, grinding & finishing duly painted with one 77.77 Kg.

coat of red oxide with erection on site as per direction of

engineer in charge with necessary grouting, cementing,

plastering & finishing complete.

Supplying and erecting approved make suitable panel Rupees Forty

indicator LED type lamp, lens cover, complete erected with Three And Paise

17 12 Nos. 43.43 Forty Three

necessary connections.

Supplying & erecting approved make Digital time switch

having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme, Rupees Three

suitable to operate on 240V + 5%, 16A with, floating contacts Thousand One

18 16 Kg. Minimum switching setup time 1 minimum & LCD display. 3168.37 Ea.

Eight And Paise

Also comprised permanent ON/OFF switching. Programming

switches & housed in fire proof thermoplastic enclosure & Only

transparent cover erected as required with necessary

connection erected as directed.

Supplying & erecting power contactor ,AC3 duty for time

switch complete erected as per direction Cat III [D] 4 pole Rupees Two

440V 40 Amp. Thousand Seven

19 16 Ea 2782.55 Hundred Eighty Ea.

Fifty Five Only

Providing & erecting 415V MCB Four Pole Switch for Lighting

Load (B curve) having 10KA breaking capacity & confirms to Rupees Six

20 25 Nos. IS :8828 in existing box having following capacity (b)40 Amp. 638.32 Ea.

Eight And Paise

Thirty Two Only

Providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 35 KA. at

415 V. having normal current rating 125A. with Fixed thermal Rupees Eight

21 5 Nos. & magnetic release suitable to work on A.C.supply 50 c/s. with 8055.76 Ea.

all internal connections, spreader tinned copper & complete

Seventy Six Only

erected in existing 16 G.M.S. housing. ICS=100% of ICU

Providing and erecting Miniature circuit breaker single pole Rupees Two

0.5A to 2A system and having breaking capacity 10 KA to be Hundred

22 111 Nos. erected in existing box. confirming to IS 8828/1996 with ISI 270.68 Seventy And Ea.

Mark Cat.III Paise Sixty Eight

Supplying & erecting earth pit of minimum bore dia.150mm

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having

80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate Rupees Four

including value of earth resistance of installation duly stamped Thousand Five

23 28 Nos. and signed by agency and officer Incharge has to ensure the 4591.46 Hundred Ninety Ea.

value of earthing resistane mentioned in test Certificate) & One And Paise

having back filling compound of (B) Inner chemical (CCM Forty Six Only

Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. (a) For

Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting Annealed bare Copper wire 8 to

24 190 Kg. 794.87 Four And Paise Kg.

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at

required depth in existing trench for laying of cable. below

62.62 Two And Paise Mtr.

ground / road surface for enclosing cable (A)50 mm outer dia

Providing & laying approved make ISI marked HDPE 6Kg /

cm2 (Class-3) as per IS:4984:1995 PE-80 to be erected at

road crossing on or floor as directed for laying of cable. The

26 260 Mtr. 491.87 One And Paise Mtr.

pipes as following size of dia & weight per 6 mtr. (E) 90 mm Eighty Seven

Supplying and erecting approved make Octagonal pole made

from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm Rupees Fourteen

Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB Thousand Ten

27 26 Nos. Mounting, stud type terminal and arrangement for cable 14010.72 And Paise Ea.

termination to be erected With Suitable foundation (Included) Seventy Two

as per details given by manufacturer considering site Only

requirement. (G) 8 Mtr. Long 70 mm Top X 155 mm bottom

dia, 3 mm thickness with 260mmX260mmX16mm base plate,

4-M20 Bolts and 600mm long with necessary G.I. J Bolts

Approx Pole weight 84 kg

Providing and erecting street light pole bracket comprising

main B Class GI pipe of 4.2 cm/require outside dia. complete

with suitable B Class G.I sleeve tubing of approx.

45cms.length and suitable for 76.5 mm / 80mm. / require size Rupees Eight

pole top having sufficient fasteners for fixing the brackets and Hundred

28 13 Nos. having spread of 1 mtr. length with suitable rise as per site 829.21 Ea.

condition & suitable welded stiffener reducer and nipple with

check nut complete painted with one coat of Red oxide / PU Only

base primer and two coats of Aluminium / PU paint. paint with

following nos of arms. [B] Double Arm Bracket 1 Mtr

[C] Three Arm Bracket 1 Mtr

29 3 1045.35 Five And Paise

Thirty Five Only

Supplying, erecting, testing, commissioning approved make M.S.

Polygonal High Mast Pole having following general Specification.(a)

Polygonal Section fabricated from M.S. Plate confirms BSEN

& Hot deep galvanized minimum 65/86 micron (as per IS 2629 /1985)

Lantern carriage with ring and rubber lines for erection of luminaries

of suitable site.(b) Maximum telescopic section not more than four

(c) Double drum gear pipe motorized winch with 6mm dia S.S. Rod

(For 16 mtr and above size)

(d) Approved make L.E.D. aviation light = 1 No. Lightening arrestor =

1 No. with necessary wiring of 2.5 sq.mm 5 core ISI copper cable

(e) Bottom most section suitable for mounting reversible motor and Rupees One

switchgears having door not more than 1400mm x 300mm with Lakh(s) Forty

waterproof gasket & hinges & locking arrangement. One Thousand

30 11 Nos. (f) Pole structure comprises suitable size of reversible motor, cable 141616.14 Six Hundred Ea.

and necessary switchgears with control panel. (g) bottom section Sixteen And

shall have suitable size of thickness supports ribs foundation bolts Paise Fourteen

(h) Item not comprises the cost of lanterns.

(i) Necessary Cement Concrete foundation as per IS including

testing & commissioning of the entire structure for following size of

High Mast poles [4] High Mast 12 Mtr. TOP A/F 105 Mm, BOTTOM

A/F 360 Mm, No. of Sec. No. - 1, Bottom Thickness -3 mm, size of

BAse PLate-Dia 520 mm x 20 mm thick,Top , Foundation Bolt Size

M24 x 8500 mm, Qty - 06 Nos., Suitable for mounting Fitting of Light -

Making trench in soft soil of suitable width of 90 cm deep for

laying cable or locating the fault all over the run and back

31 1040 Mtr. 55.55 Five And Paise Mtr.

filling the same and making the surface as normal ground.

Fifty Five Only

Making trench in Hard Murrum / Tar Road of suitable width of

90 cm or required depth for laying any size of cable or Rupees Three

32 1423 Mtr. locating the fault all over the run and back filling the same 357.54 Mtr.

Seven And Paise

and making the surface as normal ground.(B) If additional

Fifty Four Only

machinery like hammer driller or JCB use [Add]

Providing and erecting Approved make Earth fault Relay

suitable to mount with inter connection suitable to following Rupees Four

size of moulded case circuit breaker having CT ratio & MCCB Thousand Six

33 3 Nos. rating as following along with shunt trip 220V AC. with all 4687.41 Hundred Eighty Ea.

internal connections & complete erected in existing Seven And Paise

M.S.housing.. (1) 15 A -100 A , CT Ratio 1/100 Forty One Only

Providing and erecting Pipe type earthing having

cms.long and 2.5 cms. dia. galvanised iron pipe with coupling

34 9 Nos. and buch buried in specially prepared earth pit complete with 368.65 Eight And Paise

necessary 8 SWG earth wire. Sixty Five Only

For using salt and charcoal / coke as required for pipe type Rupees One

earthing. Hundred

35 9 Nos. 171.70 Seventy One Ea.

Supplying following size of Light duty “A” Class G.I . Pipe & Rupees Three

erecting as directed by Engineer-in-charge. (B) 50 mm dia Hundred And

36 245 Mtrs. 300.98 Paise Ninety

(D) 100 mm dia.

37 230 Mtrs. 696.90 Six And Paise

Drilling the road without breaking the road surface (Asphalt) Rupees Six

for laying of cable for feeding power supply by making up to Hundred Sixteen

following size of holes at both ends complete. (B) Up to 150 And Paise Ten

mm bore dia Only

Providing and erecting street light pole bracket comprising

main B Class GI pipe of 4.2 cm/require outside dia. complete

with suitable B Class G.I sleeve tubing of approx.

45cms.length and suitable for 76.5 mm / 80mm. / require size

pole top having sufficient fasteners for fixing the brackets and Rupees Six

39 10 Nos. having spread of 1 mtr. length with suitable rise as per site 614.08 Ea.

condition & suitable welded stiffener reducer and nipple with

Paise Eight Only

check nut complete painted with one coat of Red oxide / PU

base primer and two coats of Aluminium / PU paint. paint with

following nos of arms.[A] Single Arm bracket 1 Mtr[6-5-3/b]

Deputy Executive Engineer, Executive Engineer,

Electrical R & B sub-Division, Electrical R & B Division,