REPAIR MAINT OF STEEL ALMIRAH LOCKER TABLE BOOKCASE ETC AND CERTAIN WOODEN FURNITURES INCL FIXING OF TABLE TOP AT GE IMA DEHRADUN

Amount

Repair/Relacement of following u/s parts of "Almirah large steel 1/2h x 1/2s" with suitable new parts of existing shape & size complete to match the original as shown on drg no FD-1033 & FD-1111 and directed by Engr-In-Charge

Removing of U/S lock and S&F New lock of 7lever with duplicate key of approved quality. (Make: Godrej/Harrison/Link)

Removing of U/S & rusted shelves and S&F new shelves made out of 1.00 mm thick MS sheet fixed and welded where required.

Removing of u/s handles and S&F new Chromium Plated handles complete with nut and bolt of standard size.

Removing u/s hinges and S&F new hinges (75mm) through gas welding.

Removing of U/S & rusted shutters and S&F new shutter made out of 1.00 mm thick MS sheet fixed and welded where required.

Removing of U/S & rusted legs and S&F new legs made out of 1.6mm thick MS sheet fixed and welded where required.

S&F of suitable pattern MS clamps for holding of almirah shelves.

Removing of u/s & rusted hanging rod and S&F new chromium plated 25mm dia hanging rod of existing shape and size.

Removing of u/s brass bush barrel and S&F new brass bush barrel of suitable pattern to the locking system of Almirah steel.

Removing of u/s 03 Way locking device and S&F new 03way locking device with plunger rod of suitable pattern to the locking system of Almirah steel.

M&L Spray painting two or more coats with of synthetic enamel paint of silvar metalic shade/colour (outer side) and smoke gray colour paint (inner side) on old painted surface with high class finish, including necessary scrapping, denting, smoothness the surface by cleaning, removing of old paint marks etc, rubbing with sand paper, filling gaps/holes with paste filler complete all as specified & directed (Make: Asian/ Berger/ Nerolac).

Repair/Relacement of following u/s parts of "Table office officers/Table office clerk steel" with suitable new parts of existing shape & size complete to match the original as shown on drg no FD-100341004 and directed by Engr-In-Charge

S&F new top of prelaminated MDF board of 18/19mm thick size as per drg with 4mm thick teak wood half round beading all round of table top duly polished & finished as directed.

Removing of u/s lock and S&F New lock of 4lever with duplicate key of approved quality. (Make: Godrej/Harrison/Link)

Removing of u/s drawer and S&F new drawer made out of 1.00mm thick MS sheet fixing with 02 Nos of suitable sliding channels.

Tuck welding to legs frame and stiffeners as required & directed.

M&L Spray painting two or more coats with of synthetic enamel paint of OG colour on old painted surface with high class finish, including necessary scrapping, denting, smoothness the surface by cleaning, removing of old paint marks etc, rubbing with sand paper, filling gaps/holes with paste filler complete all as specified & directed (Make: Asian/ Berger/ Nerolac).

Repair/Relacement of following u/s parts of "Almirah med steel with shelves" with suitable new parts of existing shape & size complete to match the original as shown on drg no FD-243 & FD-1032 and directed by Engr-In-Charge

Removing of u/s lock and S&F New lock of 7lever with duplicate key of approved quality. (Make: Godrej/Harrison/Link)

Removing of u/s & rusted shelves and S&F new shelves made out of 1.00 mm thick MS sheet fixed and welded where required.

Removing of u/s handles and S&F new CP handles complete with nut and bolt of standard size.

Removing of u/s hinges and S&F new hinges (75mm) through gas welding.

Removing of u/s & rusted shutters and S&F new shutter made out of 1.00 mm thick MS sheet fixed and welded where required.

Removing of u/s & rusted legs and S&F new legs made out of 1.6mm thick MS sheet fixed and welded where required.

S&F of suitable pattern MS clamps for holding of almirah shelves.

Removing of u/s brass bush barrel and S&F new brass bush barrel of suitable pattern to the locking system of Almirah steel.

Removing of u/s 03 Way locking device and S&F new 03way locking device with plunger rod of suitable pattern to the locking system of Almirah steel.

M&L Spray painting two or more coats with of synthetic enamel paint of silvar metalic shade/colour (outer side) and smoke gray colour paint (inner side) on old painted surface with high class finish, including necessary scrapping, denting, smoothness the surface by cleaning, removing of old paint marks etc, rubbing with sand paper, filling gaps/holes with paste filler complete all as specified & directed. (Make:Asian/Berger/ Nerolac).

Repair/Relacement of following u/s parts of "Book Case glass front steel" with suitable new parts of existing shape & size complete to match the original as shown on drg No FD-90 (M) & FD-1028 and directed by Engr-In-Charge:-

Removing of u/s lock and S&F New lock of 6 lever with duplicate key of approved quality. (Make: Godrej/Harrison/Link)

Removing of u/s handles and S&F new CP handles complete with nut and bolt of standard size.

Removing of u/s & rusted sliding shutters and S&F new sliding shutter made out of 1.00 mm thick MS sheet fixed and welded where required.

S&F glass pane 4mm thick best quality ISI marked as specified & directed.

M&L Spray painting two or more coats with of synthetic enamel paint of OG colour on old painted surface with high class finish, including necessary scrapping, denting, smoothness the surface by cleaning, removing of old paint marks etc, rubbing with sand paper, filling gaps/holes with paste filler complete all as specified & directed (Make: Asian/ Berger/ Nerolac).

Teapoy Verandah :-Removing of u/s top and S&F new top of prelaminated MDF board 18mm thick white texture , size 900x450x18mm including 4mm thick beading all around fixed with suitable threaded machine screw and welding will be done at the crack/broken as to be required duly painted with synthetic enamel white paint and hard rubber shoes shall be provided in the legs of teapoy verandah, complete all as specified shown on drg no FD-255 and directed. (Make- Asian/ Berger/Nerolec)

Repair/Relacement of following u/s parts of "Locker steel for ORs" with suitable new parts of existing shape & size complete to match the original as shown on drg No FD-1029 and directed by Engr-In-Charge :-

Removing of u/s hasp and staples and S&F new hasp & staple of 100 mm size of mild steel.

Removing of u/s handles and S&F new CP handles complete with nut and bolt of standard size.

Removing of u/s hinges and S&F new mid weight hinges through gas welding.

Removing of u/s & rusted shutters and S&F new shutter made out of 1.00 mm thick MS sheet fixed and welded where required.

Removing of u/s & rusted shelves and S&F new shelves made out of 1.00 mm thick MS sheet fixed and welded where required.

Removing of u/s & rusted legs and S&F new legs made out of 1.6mm thick MS sheet fixed and welded where required.

Removing of u/s & rusted hanging rod and S&F new CP 25mm dia hanging rod.

M&L for spray painting two or more coats with synthetic enamel paint of silvar metalic shade/colour (outer side) and smoke gray colour paint (inner side) on old painted surface with high class finish, including necessary scrapping, denting, smoothness the surface by cleaning, removing of old paint marks etc, rubbing with sand paper, filling gaps/holes with paste filler complete all as specified & directed (Make: Asian/ Berger/ Nerolac).

Repair/Relacement of following u/s parts of "Almirah large steel with shelves" with suitable new parts of existing shape&size complete to match the original as shown on drg No FD-351 & FD-1031 and directed by Engr-InCharge:-

Removing of u/s lock and S&F New lock of 7lever with duplicate key of approved quality. (Make: Godrej/Harrison/Link)

Removing of u/s & rusted shelves and S&F new shelves made out of 1.00 mm thick MS sheet fixed and welded where required.

Removing of u/s handles and S&F new Chromium Plated handles complete with nut and bolt of standard size.

Removing u/s hinges and S&F new hinges (75mm) through gas welding.

Removing of u/s & rusted shutters and S&F new shutter made out of 1.00 mm thick MS sheet fixed and welded where required.

Removing of u/s & rusted legs and S&F new legs made out of 1.6mm thick MS sheet fixed and welded where required.

S&F of suitable pattern MS clamps for holding of almirah shelves.

Removing of u/s brass bush barrel and S&F new brass bush barrel of suitable pattern to the locking system of Almirah steel.

Removing of u/s 03 Way locking device and S&F new 03way locking device with plunger rod of suitable pattern to the locking system of Almirah steel.

M&L for t spray painting two or more coats with synthetic enamel paint of silvar metalic shade/colour (outer side) and smoke gray colour paint (inner side) on old painted surface with high class finish, including necessary scrapping, denting, smoothness the surface by cleaning, removing of old paint marks etc, rubbing with sand paper, filling gaps/holes with paste filler complete all as specified & directed (Make: Asian/ Berger/ Nerolac).

Table tubular/allwyn steel size 1210x710x8mm :- Removing of u/s top and S&F new top of prelaminated MDF board 18mm thick ,size 1210x710x8mm including 4mm thick beading all around fixed with suitable threaded machine screw and welding will be done at the crack/broken as to be required duly painted with synthetic enamel OG paint all as shwon on drg No FD-119 and as directed the Engr-in-Charge.

Removing of u/s table top and S&F New top of prelaminated MDF board of 18/19 mm thick size as per drg with 4mm thick teak wood half round beading all round of table top including two coats of spray painting (OG)/ french polish on steel / wooden surface with high class finished as directed.

Table dining 08 Persons

Table 900x600x760mm with drawer

Table writing FD/Med

Table dining of sorts

Table steel with drawer size 900x600x760mm

Table centre

Table steel without drawer 900x600x760mm

Table writing cadet

Table dining 5'x3'

Table dining spl

Table office officer wooden

Re cushioning of sofa set 05 seater : Replacement of old foam cushion seat/ back from sofa set 5 seater and fixing of foam cushion 100mm thick and 40density, size 22”x21”x4” duly covered & stiched with new cover made out of superior quality tapestry cloth of approved quality, not less than Rs. 650/-per meter including markin cloth and one side TKK chain fixed with cover for seat and back rest as per drg No FD-281& FD-373 or as directed. Make-Sleepwell/FlexiPuf/ Kurl-on.

Repair/Relacement of following u/s parts of "Table dining to seat 18 persons (5850x1050mm)" with suitable new parts of existing shape & size complete to match the original as shown on drg No BZ/FD/01 and directed by Engr-In-Charge. (Set of three pieces):-

S&F of legs made of Ist class hard wood teak as per drg and as directed.

S&F of long rail made of Ist class hard wood teak as per drg and as directed.

S&F of short rail made of Ist class hard wood teak as per drg and as directed.

S&F new top of prelaminated MDF board of 18 mm thick size as per drg with 4mm thick teak wood half round beading all round of table top and rest of all as per drg & directed.

M&L for two or more coats french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed.

Repair/Relacement of following u/s parts of "Table dining to seat 28 persons (9100x1050mm)" with suitable new parts of existing shape & size complete to match the original as shown on drg No BZ /FD/01and directed by Engr-In-Charge.(Set of four pieces)

S& F of legs made of Ist class hard wood teak as per drg and as directed.

S& F of long rail made of Ist class hard wood teak as per drg and as directed.

S& F of short rail made of Ist class hard wood teak as per drg and as directed.

S&F new top of prelaminated MDF board of 18 mm thick size as per drg with 4mm thick teak wood half round beading all round of table top and rest of all as per drg & directed.

M&L for two or more coats french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed.

Repair/Relacement of following u/s parts of "Table dining to seat 32 persons(10400x1050mm)" with suitable new parts of existing shape & size complete to match the original as shown on drg No BZ /FD/01 and directed by Engr-In-Charge.(Set of five pieces)

S& F of legs made of Ist class hard wood teak as per drg and as directed.

S& F of long rail made of Ist class hard wood teak as per drg and as directed.

S& F of short rail made of Ist class hard wood teak as per drg and as directed.

S&F new top of prelaminated MDF board of 18 mm thick size as per drg with 4mm thick teak wood half round beading all round of table top and rest of all as per drg & directed.

M&L for two or more coats french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed.

Repair/Relacement of following u/s parts of "Table dining to seat 36 persons(11700x1050mm)" with suitable new parts of existing shape & size complete to match the original as shown on drg No BZ/FD/01 and directed by Engr-In-Charge.(Set of five pieces)

S& F of legs made of Ist class hard wood teak as per drg and as directed.

S& F of long rail made of Ist class hard wood teak as per drg and as directed.

S& F of short rail made of Ist class hard wood teak as per drg and as directed.

S&F new top of prelaminated MDF board of 18 mm thick size as per drg with 4mm thick teak wood half round beading all round of table top and rest of all as per drg & directed.

M&L for two or more coats french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed.

Repair/Relacement of following u/s parts of "Table dining to seat 50 persons (16250x1050mm)" with suitable new parts of existing shape & size complete to match the original as shown on drg No BZ/FD/01 and directed by Engr-In-Charge.(Set of seven pieces)

S& F of legs made of Ist class hard wood teak as per drg and as directed.

S& F of long rail made of Ist class hard wood teak as per drg and as directed.

S& F of short rail made of Ist class hard wood teak as per drg and as directed.

S&F new top of prelaminated MDF board of 18 mm thick size as per drg with 4mm thick teak wood half round beading all round of table top and rest of all as per drg & directed.

M&L for two or more coats french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed.

Repair/Relacement of following u/s parts of "Table dining to seat 56 persons(18200x1050mm)" with suitable new parts of existing shape & size complete to match the original as shown on drg no BZ/FD/01 and directed by Engr-In-Charge. (Set of eight pieces)

S& F of legs made of Ist class hard wood teak as per drg and as directed.

S& F of long rail made of Ist class hard wood teak as per drg and as directed.

S& F of short rail made of Ist class hard wood teak as per drg and as directed.

S&F new top of prelaminated MDF board of 18 mm thick size as per drg with 4mm thick teak wood half round beading all round of table top and rest of all as per drg & directed.

M&L for two or more coats french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed.

Repair/Relacement of following u/s parts of "Table dining to seat 80 persons(23637x1050mm)" with suitable new parts of existing shape & size complete to match the original as shown on drg No BZ/FD/01 and directed by Engr-In-Charge. (Set of eleven pieces)

S& F of legs made of Ist class hard wood teak as per drg and as directed.

S& F of long rail made of Ist class hard wood teak as per drg and as directed.

S& F of short rail made of Ist class hard wood teak as per drg and as directed.

S&F new top of prelaminated MDF board of 18 mm thick size as per drg with 4mm thick teak wood half round beading all round of table top and rest of all as per drg & directed.

M&L for two or more coats french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed.

Repair/Relacement of following u/s parts of "Sofa two seater (Make-godrej silver)" with suitable new parts of existing shape & size complete to match the original as directed by Engr-In-Charge:-

Removing of U/S & rusted legs and S&F new 200mm long round legs made out of 2mm thick stainless steel as per directed by Engr-In-Charge.

Removing of U/S seat cushion of sofa set two seater and S&F new seat cushion made out of 100mm thick 40 density foam as per existing shape and size and as directed by Engr-In-Charge.

Removing of U/S foam with leatherette rexine and S&F New 50mm thick, 32 density foam fixed on seat, back and arms as par existing shape and size covered with leatherette rexine (black colour) , not less then Rs.350/- RM (as approved), fitted on 12mm thick ply wood including plastic niwar tape & cotton as drected.

avtarsinghchaddha

VARAROHA BUILDERS