Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.2 LAccepted-AOC | L1 | Accepted-AOC accepted L1 | |
| 2 | L2₹19.3 L+₹6,627 (0.35%)Rejected-AOC | L2 | Rejected-AOC L2 |
Tender Value
₹19.2 L
EMD Value
₹48,035
Closing Date
13 Dec 2019, 5:00 pmClosed
Deputy General Manager
Kerala SIDCO Limited, Housing Board Building, 6th floor, Santhi Nagar, Thiruvananthapuram - 695 001
e-tender for the Office Furnishing Works - Partitioning, Record Room setup, Computer installation and related works- at Thiruvananthapuram
2019_SIDCO_326063_1
SIDCO/PROC/SSEEKM/DC/2019-20
Open Tender
Miscellaneous Works
Item Rate
30 days
Thiruvananthapuram
Please refer Tender documents.
10 documents required · 10 mandatory
₹2,975
Yes
online
₹48,035
Yes
3 Sept 2020
30 Nov 2019
16 Dec 2019
30 Nov 2019
13 Dec 2019
30 Nov 2019
Amount
e-tender for the Office Furnishing Works[ Partitioning, Record Room setup, Computer installation and related works] at Thiruvananthapuram For more details refer tender documents
Modular Cubicle a)Modular Partition-60 - 75 mm thick, 80 microns powder coated CRCA partitions with pre punched cut outs to run electric & networking cables. Duel raceways with punch - out to fix electrical and data modules for power & data skirting level & just below table top, Writing board (White Board), Pin up board ( Soft board ). Partition are covered with 6 mm tiles (Prelaminated particle Board/MDF/Fabric Cladded Board) as required by using sliding panel method, Level adjusters and all the visible edges of partitions are covered with curved Aluminum trims. 2 mm thick PVC edge banded,25 mm thick prelaminated Particle Board table top with 2 mm PVC edge band, grommet for wire management./b. Main Table -Table made of 25 mm prelaminated particle board , Knock down fitting, Modesty panel, level adjustor, Visible edges are lipped with 2 mm PVC edge band and other edge with .5 mm edge band and additional 2 tone lapping for table top & leg, designer modesty panel etc./c .Side Table -Side table made of 18 mm prelaminated particle board , Edges are lipped with 2 mm PVC edge band, level adjustors, Hinge door, Lock, Handle etc Size:-120 (L)x 45 (W) x 75 (H) cms/d. Drawer Unit-Drawer unit made of 18 mm prelaminated particle board, 3 drawer pullouts mounted on sliders, with exposed edges lipped with PVC edge band , 0.5 mm thick central locking system for drawer pullouts. Size:-45 (L)x 50 (W) x 65 (H) cms/e. Keyboard-Supplying & fixing plastic injection molded keyboards under the worktop with telescopic channels./f. CPU Trolley-Made out of powder coated 1.6 mm thick ms sheet with adjustable width, front & back open provided with lockable castors./g. Back unit-Made of 18mm prelam board, PVC edge banded, sliding/ hinge doors, knock down fitting, horizontal panels at a distance of 45cms, vertical support to be provided at an interval of 80/90cms. Hardware like handle , lock and key, minify, powder coated clip board screws, PVC right angle block, ss slevels support, level adjusters etc./ Size:- 200 (L)x 45 (W) x 75 (H) cms
Executive Table For Stores Officer Main Table Table made of 25mm prelaminated particle board , Knock down fitting, Modestry panel, level adjustor, Visible edges are lipped with 2mm PVC edge band and other egde with .5mm edge band etcSize : 150 (L) x80 (W) x 75 (H) cms/Side Table Side Table made of 18mm thick prelaminated particle board ,Edges are lipped with 2mm PVC edge band, level adjustors,Hinge door, Lock,Handle etc Size : 90 (L) x 45 (W) x 75 (H) cms/Drawer Unit Drawer unit made of 18 mm prelaminated particle board,the pedestal unit shall have 2 drawers and 1 filing unit, with exposed edges lipped with PVC edgeband, 0.5 mm thick central locking system for drawer pullouts Size:-45 (L)x 50 (W) x 65 (H) cms /Keyboard Supplying & Fixing plastic injection moulded keyboards under the worktop with telescopic channels./ CPU Trolly Made out of powder coated 1.6mm thick ms sheet with adjustable width, front & back open provided with lockable castors.
Full Height Storage Supplying & fixing cupboards made of 18mm prelaminated particle board, exposed edges are lipped with 2mm pvc edgebanded, knockdown fittings, horizontal panels at a 45 cm and vertical support to be provided at an interval of 80/90 cms. Sliding/Hinge doors,distance of, Hardware like handle, lock & Key, minifix, podwer coated chipboard screws, pvc right angle block, SS support, level adjusters etc. Size : 240 (L) x 45 (W) x 185 (H) cms
Aluminium Partition using 2''x1''x1mm thick aluminum Providing and fixing aluminium partion by using 2''x1''x1mm thick aluminum extention vertically and horizontaly, provide 6mm thick both side laminated prelam board up to 90 cm height and provide 5mm glass further 90cm height and balance 60cm prelaminated particle board.
Compactor (Mechanical Drive) - Two Baya) A Set of 24 Almirahs Made of Pre coated/Epoxy powder coated CRCA steel, Central locking system, Adjustable Shelves, Mechanically Assisted Movement, Handle, Rail with anti topple system.a)Two Bay Static Unit /b)Two Bay Moveable Unit /c)Two Bay Twin Unit
Compactor (Mechanical Drive) - Two Baya) b) A Set of 20 Almirahs Made of Pre coated/Epoxy powder coated CRCA steel, Central locking system, Adjustable Shelves, Mechanically Assisted Movement, Handle, Rail with anti topple system.a)Two Bay Static Unit /b)Two Bay Moveable Unit /c)Two Bay Twin Unit
a) Light point including labour charge 1 MM wire 3 sircute 20 mm pipe, Bend & Junction. Hanging type tube set single.
b) Wall fan point including labour charge 1 MM wire 3 sircute 20 mm pipe, Bend & Junction.
c) UPS plug point 12 computer 1.5 MM wire 3 sircute 20 mm pipe, Bend & Junction. Including labour charge
a) D-link 8 port 10/100 Switch
b) D-link 5 port 10/100 Switch
c) D-link CAT6 UTP patch cord 2m
d) D-link Duel/single face plate
e) D-link CAT 6 Cabling
f) D-link CAT6 IO
VINYL FLOORING Providing & fixing of 2 mm thick vinyl flooring by using fevicol.
J J Industries
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .