PROVN OF FURNITURE FOR OTM ACCN (PH-II) AT ARMY AREA NAGTALAO UNDER GE BANAR

Amount

Black Board With Easel (Fibre Glass) (FD-1041) Overall size of easel frame shall be 760mm wide at bottom and 300mm wide at top. Frame shall be made of 32mm x 25mm MS rectangular tube of thickness 1.6mm. A stay of 1525mm long shall be hinged to intermediate stiffener at 300mm from the top stiffener space. All exposed steel surface shall be painted with two coat of light grey coloured synthetic enamel paint over a coat of primer. Rest all as per drg.

Chair WBB (FD-285) Over all size shall be 445mm long in front side and 405 mm in rear side, 430mm wide and 835mm high. All wood shall be teak wood. All exposed wooden surface shall be French polished. Rest all as per drg.

Chair Dining (FD-279) All wood shall be first class hard teak wood. Over all size shall be 440mm long in front side and 405 mm in rear side, 430mm wide and 890mm high. Canning shall be done as per Godrej pattern with 2 mm wide and 0.40 mm thick half round cane. All exposed wooden surface shall be French polished. Rest all as per drg.

Chair Dining With Long Back (FD-357) All wood shall be first class hard teak wood. Over all size shall be 450mm wide x 530mm deep x 1200mm height. The height of seat shall be 490mm from the ground irrespective 450mm shown on drg. The removable seat shall be made out of 75mm thick urethane foam with 40 density pasted with adhesive on 12mm thick BWR Grade plywood covered with acrylic fabric of cost not less than Rs 350/- per RM. All exposed wooden surface shall be French polished. Rest all as per drg.

Chair Easy (FD-229) All wood shall be first class hard teak wood. Over all size shall be 575 mm long 510 mm wide and 740 mm high. Canning shall be done as per Godrej pattern with 2 mm wide and 0.40 mm thick half round cane. All exposed wooden surface shall be French polished. Rest all as per drg.

Chair Writing (FD-280) Over all size shall be 535mm long in front side and 470 mm in rear side, 470mm wide and 890mm high. Canning shall be done as per Godrej pattern with 2 mm wide and 0.40 mm thick half round cane. All exposed wooden surface shall be French polished. Rest all as per drg.

Desk with Dias (FD-399) Desk Overall Size shall be 970mm wide x 670mm deep and 1220mm high. Top of the desk shall be made of 19mm thick teak wood plank.Top rail, middle rail and bottom rail shall made of 75x50mm teak wood.Front and side of desk shall be made of 6mm thick one side teak ply. Dias overall size shall be2700mm long, 2500mm wide and 200mm high.Top of dias shall be made of 25mm thick prelaminated particle board. Frame shall be made of teak wood rails of size 40x80 and 30x 50 for outer rails and inner rails respectively. Legs shall be made of tek wood of size 100x100x175mm and 75x75x175mm for side/middle legs and inner legs respectively.All exposed surface should be french polished.Rest all as per drg.

Hot Case Large (FD-364) Over all size shall be 1350mm long x 540 mm wide x 840 mm high. Legs shall be 45mm x 45mm section at top and 30mm x 30mm section at bottom. Side rack and front shutter shall be made of 18mm thick exterior grade prelaminated particle board. Top shall be made of 25mm thick polished kota stone slab. All wood shall be teak. All exposed wooden surface shall be French polished. Rest all as per drg.

Hat/Cap Stand With Looking Mirror (FD-362) Over all size shall be 1130mm long and 710mm high.5.5mm thick Mirror of size 300mm x 440mm shall be provided .10mm x 12mm thick teak wood edging all around the mirror. Brass pegs of size 120mm x 75 mm shall be fixed. Rest all as per drg.

Magazine Rack Medium (FD-365) Over all size shall be 1200mm long , 800mm high and 100mm wide of the deep. Back shall be 12mm thick commercial particle board with 1.5mm thick laminated sheet fixed over it with fevicol. 3 nos vertical partitions 800mm high and 100mm wide shalee be equally spaced making four equal compartment. 10mm thick teak wood planks shall be provided at lower base and upper at 20mm centre to centre in such a way that top shall be 175mm.Prepex sheet 3mm thick fixed in 5mm wide groove inside plank.All wood work and teak veneered surfaces shall be melamine polished with high class glossy finish on exposed surfaces.

PEG TABLE (FD-384) Overall size shall be 450 mm x 300 mm x 380 mm. All wood work shall be 1st class hard teak wood. Top shall be made of 18 mm thick pre laminated (wall-nut colour) board of exterior grade. 4 mm thick teak wood edging around top shall be provided. All exposed surface of timber shall be polished in wall nut colour with melamine finished. PVC/hard rubber shoe shall be screwed all 04 legs. Rest all as per drgs

Peg Set of 3 (FD-80) Over all size shall be 460 mm long x 75mm x 19mm thick of teak wood. Three nos 7mm dia aluminium rod bend to shape and revited to aluminium flat shall be provided at 90mm from each ends. Rest all as per drg.

Peg Set of 6 (FD-80) Over all size shall be 910 mm long x 75mm x 19 mm thick of teak wood. Six nos brass pegs shall be fixed all as shown as drawing. Rest all as per drg.

Pointer Long (FD-1041) Size of pointer shall be 1525 mm long and dia should be 25 mm at one end and 12 mm at other end. Pointer shall be round shape and smooth on surface. Pointer shall be made of teak wood and French polished.

Pointer Small (FD-1041) Size of pointer shall be 900 mm long and dia should be 25 mm at one end and 12 mm at other end. Pointer shall be round shape and smooth on surface. Pointer shall be made of teak wood and French polished.

Rack Rifles for 20Rifles (HQ/134/22/89) Rack Rifles for 20 rifles with chain and locking arrnagement.The post, base, top support, bottom plank and top planks made of teak wood.All exposed sureface shall be french polished. Rest all as per drg.

Safe Meat And Milk Large (FD-370) Over all size shall be 1350 mm long x 840 mm high. Top shall be made of 25 mm thick polished Kota stone duly round edges. Side front and back shall be made of 19mm thick exterior grade pre laminated particle board in teak finish . Legs shall be made of teak wood of size 45mm x 45mm at the top and 30mm x 30mm at the bottom. 12 Mesh 20guage wire mesh shall be fixed in sides and all three front shutters. All exposed surface shall be French polished. Rest all as per drg.

Side board (FD-371) Over al size shall be 1220mm long, 455mm wide and 760mm high. Leg shall be 45mm x 45mm in section. All wood shall be teak wood. Top of side board shall be 18/19mm thick post forming exterior grade MDF board of teak face shade. Four drawer shall be provided in right hand side of side board. Left hand side shall have one shelf and two side hung shutters. All exposed surface shall be melamine polished. Rest all as per drg.

Sofa Single Seater (FD-281) The set shall be consist of single three seat. Legs and arms shall be 70mm x 35 mm in section. Front and side rails shall be 35mm x 100 mm teak wood. 40mm x 40mm wooden bearer shall be provided at the bottom of seat over which 07 numbers 50 mm x 20 mm wooden batten shall be fixed 04 numbers 50mm x 20 mm wooden batten shall be provided at the back of sofa. Foam cushion of 40 density of size 530mm x 500mm x100mm duly upholstered with tepastry cloth as approved by GE not less than 350/- per RM shall be provided. All wood shall be teak wood. All exposed surface shall be French polished. Rest all as per drg.

Sofa Set 3 Seater (FD-281) The set shall be consist of single three seat. Legs and arms shall be 70mm x 35 mm in section. Front and side rails shall be 35mm x 100 mm teak wood. 40mm x 40mm wooden bearer shall be provided at the bottom of seat over which 21 numbers 50 mm x 20 mm wooden batten shall be fixed.14 numbers 50mm x 20 mm wooden batten shall be provided at the back of sofa. Foam cushion of 40 density of size 530mm x 500mm x100mm duly upholstered with tepastry cloth as approved by GE not less than 350/- per RM shall be provided. All wood shall be teak wood. All exposed surface shall be French polished. Rest all as per drg.

Sofa Set 5 Seater (FD-373) The set shall be consist of two single seat and one three seat. Legs and arms shall be 70mm x 35 mm in section. Front and side rails shall be 35mm x 100 mm teak wood. 40mm x 40mm wooden bearer shall be provided at the bottom of seat over which 50 mm x 20 mm wooden batten (21 numbers for three seat and 7 numbers for single seat sofa) shall be fixed.50mm x 20 mm wooden batten (14 numbers for three seat and 4 numbers for single seat sofa) shall be provided at the back of sofa. Foam cushion of 40 density of size 530mm x 500mm x100mm duly upholstered with tepastry cloth as approved by GE not less than 350/- per RM shall be provided. All wood shall be teak wood. All exposed surface shall be French polished. Rest all as per drg.

Stool Dressing (FD-282) Overall size shall be 450 mm long 300 mm wide and 380 mm height. All wood shall be of 1st class hard wood teak. Legs shall be of 50 mm x 30 mm in section throughout 380 mm height. Two short stiffeners joining legs in shorts sides at 100 mm bottom shall be provided as 19 mm x 25 mm in section teak wood. Plastic cane shall be provided on seat with 2 mm wide and 0.4 mm thick. Cane shall be woven as godrej pattern. All wood surface exposed to view shall be polished in wall nut colour with melamine finished.

Table Card (FD-352) Over all size shall be 900 mm long x 900 mm wide x 760 mm high. Legs shall be 55mm x 35mm in section. Top of the table shall be 19 mm thick commercial particle board over which superior quality green baize cloth shall be fixed. All wood shall be teak. All exposed surface shall be French polished. Rest all as per drg.

Table Dressing Ladies with Mirror (FD/MAP-II/07) Over all size shall be 1150 mm wide x 380mm deep and 1700mm high. The body and stool of dressing shall be made of 18/19mm thick exterior grade MDF board of approved shade. The stool shall be supported on 50mm dia PVC heavy duty twin caster wheels. Rest all as per drg.

Table TV/ TV TROLLEY (FD/MAP-II/04(R)) Over all size shall be 825mm long x 625mm wide x 750mm high. Top, side and bottom of trolley shall be made of 18/19mm thick MDF board . Glass shutter shall be made of 5.5mm thick plain glass. Rest all as per drg.

Table Dressing Gents with Mirror (FD-379) Over all size 1650 mm high 600 mm wide and 300 mm deep. Cabinet size shall be 1200 mm x 600 mm x 300mm. Side bottom and top of cabinet shall be made of 18/19 mm thick exterior grade particle board. Back and base of mirror shall be made of 12 mm thick plywood.02 nos legs of size 450mm x 38mm x 38 mm shall be provided including brackets of size 38 mm x 112 mm x 112mm .All exposed surface shall be French polished. Rest all as per drg.

Table Dining 6 Pers (FD-273) Over all size shall be 1500mm long 900 mm wide and 760 mm high. Leg shall be 75mm x40mm in section. 5mm x 5mm in section groove shall be provided at the visible portion of top of legs.8 Nos wooden corners shall be provided to joining legs with top rail even not shown on drg as directed by engineer in charge. All wood shall be teak wood. Top of table shall be 18/19 mm thick exterior grade prelaminated particle board of teak face shade. All exposed surface shall be French polished. Rest all as per drg.

Table Dining 8 Pers (FD-273) Over all size shall be 1800mm long 900 mm wide and 760 mm high. Leg shall be 75mm x40mm in section. 5mm x 5mm in section groove shall be provided at the visible portion of top of legs.8 Nos wooden corners shall be provided to joining legs with top rail even not shown on drg as directed by engineer in charge. All wood shall be teak wood. Top of table shall be 18/19 mm thick exterior grade prelaminated particle board of teak face shade. All exposed surface shall be French polished. Rest all as per drg.

Teapoy (FD-382) Over all size shall be 600mm long 450mm wide and 540mm high. Leg shall be 60mm x 30mm in section. 5mm x 5mm in section groove shall be provided at the visible portion of top of legs. H type stiffener of size 20mm x 50mm shall be provided even not shown on drg. All wood shall be teak wood. Top of the table shall be 18/19mm thick post forming exterior grade MDF board of approved colour. All exposed surface shall be melamine polishes. Rest all as per drg.

Description of Work / Item(s)

Amount

Almirah Large Glazed (FD-104(M)) Over all size shall be 920mm long, 485 mm wide and 1985 mm high. Two numbers base channel of 100 mm height made of mild steel sheet shall be welded at 50mm from each end of 760 mm length. Steel sheet shall be 1 mm thick. Fitted with 4 Adjustable shelves marking five compartments and glazed shutters to be fitted with handle and three way locking device. All exposed steel surface shall be painted with two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drawing

Almirah Large Steel (FD-1031) Over all size shall be 920mm long, 485 mm wide and 1985 mm high. Two numbers base channel of 100 mm height made of mild steel sheet shall be welded at 50mm from each end of 760 mm length. Steel sheet shall be 1mm thick. Four shelves equally spaced making five compartments shall be provided. All exposed steel surface shall be painted with two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drg.

Almirah Med Steel (FD-1032) Over all size shall be 760mm long, 440 mm wide and 1270 mm high. Two numbers base channel of 100 mm height made of mild steel sheet shall be welded at 50mm from each end of 760 mm length. Steel sheet shall be 1 mm thick. Three shelves equally spaced making four compartments shall be provided. All exposed steel surface shall be painted with two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drg.

Book Case Open Large Glazed (FD-1028) Over all size shall be 840mm long, 310mm wide and 1675mm high. All sheet shall be 20 gauge thick mild steel sheet. Book case shall be provided four equally spaced compartments with 3 mm thick glass panes shall be fixed to sliding shutter, which shall move on 1.25 mm thick MS channels and each shutter shall be provided with locking system brass 6 lever with duplicate key of approved quality. All exposed steel surface shall be painted with coats of light grey/off white coloured enamel paint except front side of shutter which shall be painted with two coats of blue/brown colured enamel paint over a coat of primer. Rest all as per drg.

BED HARD MS SQUARE PIPE WITH PLYTOP (FD/E6/MAP/08(R)) Overall size shall be of 2050 mm long x 900 mm wide. Height of bed shall be 500 mm on foot rest and 800 mm at head rest .Long rail and short rail shall be 25X65mm box section of 16 gauge MS tube. Frame of foot and head rest shall be 18 mm x 18mm box section of 16 gauge MS tube. Top of the bed shall be 12 mm thick BWR commercial plywood duly ISI marked. 4 Nos stiffener shall be 25mm x 25mm box section in 16 gauge. All exposed steel surface shall be painted with two coat of black coloured enamel paint over a coat of primer. Rest all as per drg.

Charpoy MS Square Pipe (FD/MAP-II/01) Overall size shall be 1980 mm long, 900mm wide and 440mm high. Leg and frame shall be made of 32x32mmx16 gauge MS Tube.03 Nos stiffeners of size 25mm x 25mmx 18 gauge shall be provided however only 02 nos of stiffeners have shown on drawaing.MS plate 32x32mmx 5 gauge welded at bottom of legs and under which 3mm thick rubber sheer fixed with adhesive. Top shall be made up of 12mm thick BWR grade plywood. All exposed steel surface shall be painted with two coats of black paint over a coat of primer. Rest all as per drg.

Chair CBA Steel (FD-75(M)) Over all size shall be 535mm wide 560 mm deep and 900 mm high. Frame shall be made of 20 mm dia 1.6 mm thick conduit pipe. Seat and back of chair shall be made of wooden frame duly canned with 2 mm wide 0.40 mm thick can. All exposed steel surface shall be painted with two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drg.

Chair CBA Special with Hand Rest (FD-260 (M)) Overall shall be 770mm high, 490mm wide and 460mm deep. Frame shall be made up of 20mm dia 16 gauge conduit pipe. Polypropylene co-polymer seat of weight 1.20kg.Hand rest shall be 20thick commercial ply finished with plastic laminated teak finish. All exposed steel surface shall be painted with two coat of black coloured enamel paint over a coat of primer. Rest all as per drg.

Chair Verandah (FD-256) Over all size shall be 460 mm long 600 mm wide and 760 mm high. Legs shall be made of 20 mm thick dia and 1.6 mm thick mild steel conduit pipe. The horizontal distance between legs at seat level shall be 450 mm and shall be 600 mm at bottom level. Seat and back shall be weaven with 4 mm wide plastic cane. All exposed steel surface shall be painted witn two coat of white coloured enamel paint over a coat of primer. Rest all as per drg.

Chair Writing Steel (FD-360) Overall size shall be 535mm long in front side,470mm wide and 890mm high. Frame of chair shall be made of 19mm square steel tube. Foam cushion of 32 density over 12mm thick plywood for seat and back of chair duly upholstered with approved leatherite. All exposed steel surface shall be painted with two coat of approved synthetic enamel paint over a coat of primer. Rest all as per drg.

Form With Back (FD-78(M)) Over all size shall be 1800mm long 510 mm wide and 900mm high. Steel frame shall be made of 1.6 mm thick 25 mm square MS pipe. Wooden seat shall be teak wood in one piece and of size 1800 mm long x 255 mm wide x 25mm thick. Wooden back shall be teak wood in one piece and of size 1800 mm long x 150 mm wide x 19 mm thick. All exposed steel surface shall be painted with two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drg.

Ladder Aluminium (FD-1025) Over all size shall be 2310mm long and 300mm wide. Two Aluminium stringer of size 2310mm long 60mm wide fitted with equally spaced 8nos of aluminium conduit pipe of 23mm dia 300mm long. Rest all as per drg.

Locker Bedside Steel (FD-1029) Over all size shall be 760mm long, 600 mm wide and 1100 mm high. Two numbers base channel of 100 mm height made of mild steel sheet shall be welded at 50mm from each end of 760 mm length. Steel sheet shall be 1 mm thick. All exposed steel surface shall be painted with two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drg.

Rack Six Tier Steel (FD-1038) Over all size shall be 915mm long 610 mm wide and 1905mm high. Four nos vertical angle iron of 40mm x 40mm x 4mm shall be provided at the corners of the rack. Top, bottom, sides, back and shelves shall be made of 1mm thick mild steel. All exposed steel surface shall be painted with two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drg.

Rack steel 03 tiers (FD-1039) Overall size shall be 915 mm long, 615 mm wide and 990 mm high, 04 Nos verticle angles iron of size 40x40x4 mm shall be provided at the corner of the rack. Top, bottom, sides, back and shelves shall be made of 1 mm thick mild steel sheet. All exposed steel surfaces shall be painted with two coats of light grey coloured enamel paint over a coat of primer. Rest all as per drawing

Rack side steel with tray 03 space (FD-1039) Overall size shall be 840 mm long, 355 mm wide and 810 mm high, 04 Nos mild steel angles iron of size 40x40x3 mm shall be provided as legs and shall be 810 mm high. Top shelf shall have 03 compartment of equally spaced with 50 mm high partition and back covered with two coats of light gret enamel paint over a coat of primer. Rest all as per drawing.

Rack side steel with Tray 4 space (FD-1023) Over all size shall be 1120mm long, 355mm wide and 810mm high. 04 Nos mild steel angle iron of size 40mm x 40mm x 3mm shall be provided as legs and shall be 810mm high. Top shelf shall have 4 compartments of equally spaced with 50mm high partition and back covered with 20 gauge thick MS steel sheet. All exposed steel surface shall be painted with two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drg.

Table Bed Side (FD/E6/MAP/15R) Over all size shall be 450mm x 450 mm x 600 mm. Whole body and drawer shall be made of 18/19mm thick exterior grade per laminated particle board. Frame shall be made of 18/19 mm thick exterior grade prelaminated particle board. Frame shall be made of 18mm x 18mm square mild steel 18 gauge tube. The drawers shall run on 1.6mm thick telescopic channels. All exposed steel surface shall be painted with black coloured synthetic enamel paint. Rest all as per drg.

Teapoy Verandah (FD/MAP/E6/17) Over all size shall be 700mm long 400mm wide and 540mm high. Frame of table shall be made of 18mm square pipe of 18 gauge thick. Top of table shall be 18/19mm thick post forming exterior grade MDF board of approved colour. All exposed steel surface shall be painted with two coat of approved coloured enamel paint over a coat of primer. Rest all as per drg.

Table Computer (FD-E6/MAP/3/3) Over all size shall be 900 mm long x 581.20 mm wide x 750 mm high. Top and side frame of the table shall be made of 18 Gauge 25 mm square MS pipe. Base shall be made of 18 Gauge 25x 50mm MS rectangular pipe. Top, side panels and drawers shall be made of 18 mm thick both side laminated (sea beach coloured )MDF board. Telescopic channels shall be provided in the drawers, pull out tray and key board tray. Nylone buffers shall be provided on the legs of table. All exposed steel surface shall be painted with black coloured powder coated paint. Rest all as per drg.

Table 3'x2' with drawer (FD-1008) Over all size shall be 900mm long 600 mm wide and 760 mm high. Steel frame shall be 800 mm x 500 mm x 742mm made of 1.6 mm thick 25 mm square mild steel tube. A drawer of size 350mm x 130 mm x 500 mm shall be provided on the left side of the table. Top of table shall be 18/19 mm thick exterior grade prelaminated particle board of teak face shade. All exposed steel surface shall be painted with two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drg.

Table 3'x2' without drawer (FD-284) Over all size shall be 900mm long, 600mm wide and 760mm high. Steel frame shall be 800mm x 500mm x 742mm. Legs shall be 25mm square MS Tube 1.6mm thickness. Top shall be 18mm thick MDF board with teak wood edged. Rest all as per drg.

Table 90X90 cms (FD-1009) Over all size shall be 900mm long, 900mm wide and 760mm high. Steel frame shall be 800mm x 800mm x 742mm. Legs shall be 25mm square MS Tube 1.6mm thickness. Top shall be 18mm thick MDF board with teak wood edged. Rest all as per drg.

Table Office Clerk Steel (FD-381) Overall size shall be 1200 mm long 610 mm wide and 760 mm high. Steel frame shall be 1160 mm x 570 mm x 742 mm made of 1.6 mm thick 25 mm square mild steel tube. Three drawer of equal shall be provided. Size of drawer shall be 350 mm wide 430 mm high and 410 mm deep. Top of table shall be 18/19 mm thick exterior grade prelaminated particle board of teak face shade. All exposed steel surface shall be painted with two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drg.

Table Office Officer Steel (FD-1003) Overall size shall be 1680 mm long 870 mm wide and 760 mm high. Steel frame shall be 1600 mm x 565 mm x 742 mm made of 1.6 mm thick 25 mm square mild steel tube. Three drawer of equal shall be provided. Size of drawer shall be 350 mm wide 430 mm high and 410 mm deep. A cupboard with front operable door on left hand side of table shall be provided. Top of legs shall be joined together with U shaped frame of 25 mm x 40 mm sized 1 mm thick MS sheet. Top of table shall be 18/19 mm thick exterior grade prelaminated particle board of teak face shade. All exposed steel surface shall be painted with two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drg.

Table Pantry Medium (FD-1020) Over all size shall be 900 mm long 550 mm wide x 840 mm high. Steel frame shall be made of 1.6 mm thick 25 mm square MS tube of size 880mm x 515 mm x 815mm. Two drawer of equal size shall be provided at the bottom of the top.10 mm long lug 4 in number shall be welded at the top of the frame to fix the 25 mm thick stone top. Top of the table shall be made of 25mm thick polished kota stone slab duly round edges. All exposed steel surface shall be painted with two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drg.

Table Steel with Stainless Steel (FD-1013) Over all size shall be 2100mm long, 900mm wide and 760mm high. Legs shall be 25mm square MS Tube 1.6mm thickness. Top shall be 1.00mm nominal thickness stainless steel sheet on top. Stiffeners shall be 25mm square MS Tube of 1.6mm thickness. Rest all as per drg.

Table Steel 1520X860X760mm(FD-139) Over all size shall be1520mm long, 860mm wide and 760mm high.. Top shall be 18mm thick MDF board with teak wood edged. Rest all as per drg.

Table Centre with Glass Top (FD-375) Over all size shall be 1200 mm long x 600mm wide and 400 mm high. 4 Nos legs shall be 40mm dia 16 Gauge stainless steel pipe in one piece. Legs shall be joined in long and short side with 02 nos 25mm dia stainless steel pipe of wall thickness of 16 gauge. Top pipe shall be fixed at 150mm from the top and lower pipe shall be 100mm from the bottom of top pipe. The stainless steel frame shall be 900mm long and 450mm wide. The bottom of legs shall be covered with 16 gauge thick stainless steel sheet and shall have PVC shoes. Top of the table shall be made of 10mm thick white or smoke grey coloured round edges tinted glass rounded in corners. Rest all as per drg.

Table Cook House Top (FD-377) Over all size shall be900 mm long 540 mm wide x 840 mm high. Steel frame shall be made of 1.6 mm thick 25 mm square MS tube of size 850mm x 490 mm x 815mm.10 mm long lug 4 in number shall be welded at the top of the frame to fix the 25 mm thick stone top. Top of the table shall be made of 25mm thick polished kota stone slab duly round edges. All exposed steel surface shall be painted with two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drg.

Trestle Store Room (FD-1043) Over all size shall be 2440mm long x 600mm wide x 300mm high. Two angle iron of size 40mm x 40mm x 6mm and 1980 mm long shall be provided 520mm apart at bottom connection 50mm x 3mm flat iron bracketing, four in numbers and equally spaced with 500m x 50mm x 6mm T iron. Two angle iron of size 40mm x 40mm x 6mm and 2440mm long shall be provided at the top. All exposed steel surface shall be painted with two coat of black coloured enamel paint over a coat of primer. Rest all as per drg.

Work bench shop (FD-1024) Over all size shall be 1800mm long ,900 mm wide and 760mm high. Steel frame shall be made of 1.6 mm thick 32 mm square MS pipe. Size of drawer shall be 900mm wide 450 long mm and 125 mm deep. Top of table shall be 40mm thick 2nd class hard wood with three coats of oil paints. All exposed steel surface shall be painted with two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drg.

Rack Towel (FD-380) Over all size shall be 360width and 915m high approx. Tabular steel frame over bared finish to required shape.

Receptacle PVC (FD/E6/MAP/13) Made of thick plastic polymer. Capacity shall be 20ltr aprrox.

Stool Steel (FD-81(M)) Over all size shall be 305mm wide x 305mm long x 510 mm high. Stool shall be made out of 1 mm thick MS sheet. All exposed steel surface shall be painted with two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drg.

Stool Adj Steel (FD-1026) Over all size shall be 510mm wide x 510 mm long and 600 mm high. Stool shall be made out of 25mm dia MS sheet pipe of 1.6mm thickness. Padded seat covered with rexine in olive green colour. All exposed steel surface shall be painted with two coat of light grey coloured enamel paint over a coat of primer. Rest all as per drg.

Description of Work / Item(s)

Amount

Bar Stool 3' High Cushioned Sleek bar stool is made of fine quality carbon metal that is upholstered with cushioned leatherette. The bar stool of Height x Width: 1100 mm x 400 mm (3 ft 7 in x 1 ft 3 in) with adjustment facility at the base that allow lift. MBTC Rapid or techno-commercial equivalent.

Bed Fowler Steel Overall Dimensions 200.00cm x 100.00cm x 60.00cm Collapsible Side Railings. Back rest & knee rest position obtained by remote system. 4-Sections Perforated CRC Sheet. Removal And Lockout ABS Panel. Mounted On 100 mm Dia Castor. ABS Corner Bumper. Drainage Bag Hooks. Four I.V Pole Sockets. Available With Removable I.V Pole. Remote Operated Back Rest - 80 degree. Knee Rest - 35 degree. Head & Foot Panel : 2 ABS PANEL Leg Stand : Two Legs Stand Wheels : 4 Wheels Fitted In Leg Stand Railing : 2 Collapsible Side Railing Welton health or techno-commercial equivalent.

Board Notice The wall mounted green/red colored board of teak wood frame of size 5ft x 4ft with shutter of 5mm glass and lock.

White Board 4x5 ft The wall mounted magnetic white board of aluminium frame of size 4 x 5 ft having Super White' writing grade resin coated steel writing surface and scratch-free surface.

Chair Barber With Adj Neck rest The Reclining barber chair with strong metal frame Soft cushy sofa, Adjustable pull out head rest, Reclining seat with synchronized back and leg lift moment, Hydraulic swivel pump with locking, Strong hydraulic pump for height adjustment and Extendable foot rest Make-IKONIIC. Ikoniic Professional or techno-commercial equivalent.

Chair Umpire Movable and portable chair umpire is made up of heavy mild steel pipe of thickness 18/19 gauge with plastic pvc seat and hand rest. The overall height is 8 feet and height of chair from ground level is 5 feet .Five equally spaced ladder steps. Detec or techno-commercial equivalent.

Chair Revolving Overall dimension 76W x 76D x 114H (in cm) with seat height 96cm in black color. The seat is made up of high quality leatherette upholstery, permanent contact with tilt mechanism ,height adjustable arms and powder-coated metal parts. The hydraulic lift with 5 pronged strong metal base with wheels. Godrej Interio or techno-commercial equivalent.

Chair Computer Overall dimension 70W x 105.5D x 70H (in cm) with seat height 53.8 cm in black color. The seat is made up of high quality leatherette upholstery, permanent contact with tilt mechanism ,upright locking position having Fixed loop Arm rest and powder-coated metal parts. The hydraulic lift with 5 pronged strong metal base with wheels. Godrej Interio or techno-commercial equivalent.

Office Chair Overall dimension 58W x 70D x 103H (in cm) with seat height 44.5-53.8 cm. The Fabric upholstered on back & Seat with Moulded Foam having Fixed Arm rest made of Polypropylene and powder-coated metal parts. The hydraulic lift with 5 pronged strong metal base with wheels. Godrej Interio or techno-commercial equivalent.

Counter L-shape Corner Table with Return Storage for Cabin, Table top made of 25mm thick prelaminated particle board and PVC edge banding, Signature Legs made of powdered 50mm square pipe with polycarbonate shoes, Metal powder coated modesty panel of 400mm height; Access Flap for easy wire management, Main Table Dimensions -1800X750X750mmH; Return Storage Dimensions - 900X400X750mmH. SOS Spacewood or techno-commercial equivalent.

Couch Examination with foot step Overall dimension190x60x75 cm made up CRCA sheet adjustable head section on gas spring. Top in upholstered and covered with washable plastic material. Three drawers and three cabinet with separate door at bottom. Leg end consisting of U cut with removable basin and lithotomy rods with strip. Wellsure Healthcare or techno-commercial equivalent.

Display Board The wall mounted velvet notice pin-up board of dimension 8x4 ft. The frame is made of aluminium and material of cloth is velvet in green color.

Document Cabinet Overall Dimension 90W x 50D x 198H (in cm) and weight 62Kg made of sheet shall be 20 gauge thick mild steel sheet. Five equal storage compartments with Three-way locking mechanism with chromium plated handle. The door with glass of thickness 5mm. Nilkamal or techno-commercial equivalent.

DSS IC Table (DT 2010) Overall size is length 72 inch x width 37 inch x height 46 inch.The size of base table is length 72 inch x width 37 inch x height 28 inch have two drawer of size length 24 inch x width 20 inch x height 28 inch( one drawer is on left side and other on right side of table). the equally sized unit of 6 drawers of overall size is length 72 inch x width 20 inch x height 18 inch is fixed on the top of table.All wood shall be teak wood. All exposed wooden surface shall be french polished.

Lecture Stand Overall Dimension 25W x 18D x 48H in inches made of laminated board of light brown color with two door cabinet having metallic handles. Sam Décor Furniture or techno-commercial equivalent.

Rack Shoe Steel Over all size shall be 700mm long 300mm wide and 880mm high.Frame of rack shoe shall be made of 25mm dia MS Pipe of 18 guage thick. Jali framework of 19mm dia MS Pipe of 18 gauge welded to legs.Jali framework made up of 9 nos of equidistant MS rod of dia 3mm. Rest all as per drg.

Stand Hand Wash Basin Overall size lenght1.5ft x breadth 2 ft x height 4.5ft and weight 14-18 kg approx of stainless steel of double tap wash basin type.he water tank capacity is 25-30litres.

Study Table Overall Dimension 120W x 101.8H x 60.5D in cm is made of particle board having 2 nos of drawer with metallic handle Godrej Interio or techno-commercial equivalent.

Study Chair Overall dimension Width 58cm, Depth 70cm and Height 103cm.The Fabric upholstered on back & Seat with Moulded Foam having Fixed Arm rest made of Polypropylene. Pushback mechanism & 90 mm stroke Standard gas lift with Twin wheel Castors. Nilkamal or techno-commercial equivalent.

Screen Movable The mild steel powder coated 3 fold bedside screen with dimensions are 170x245x20cm and it has a 6 wheels of 5cm diameter. Wellsure Healthcare or techno-commercial equivalent.

Table Serving Silver colored Three tier rust resistant metal instrument/serving trolley of dimension 40Lx40Wx76H. Universal self-contained ABS brake lock system with 4 nos of wheels dia 5cm. Milad or techno-commercial equivalent.

Table Lab with sink and drain board special/Work Bench Lab Over all size shall be 1800mm long, 900 mm wide and 760mm high. Steel frame shall be made of 1.6 mm thick 32 mm square MS pipe. Size of drawer shall be 900mm wide 450 long mm and 125 mm deep.Top of table shall be 18-20mm thick granite top with 400x400x250mm wash basin, 1 mixer tap(cold and warm water) and 1 waste piper All steel surface shall be painted witn two coat of light grey coloured enamel paint over a coat of primer.

Table Newspaper H-type cross bracings combined with leveling bolts at the bottom of prime quality CRCA steel tubes and sheets having 4 wheels of 5cm diameter. It consists of 2 inclined/double sided MDF reading tops of dimension 90x60cm mounted on a metallic structure. Pragati System or techno-commercial equivalent.

Pilot Helmet Rack DS-15H Overall size width 90.5cm, depth 40 cm, height 185cm and weight not less than 52kg.The body,back and shelves made up of 0.6mm thick powder coated CRCA sheet and doors made up of 0.8mm thick powder coated CRCA sheet . Total 15 numbers of individual lockers with locking faclity( duplicate key). Godrej Interio or techno-commercial equivalent.

Safe Regimental Treasury Overall Size 35D x 36W x 55.5H in Cms of 55 litre capacity made up of alloy steel. It should have touchpad control type with electronic locking system. It should be floor mount/ table top mount. It also inlcudes Low battery Indicator, digital locker biometric with fingerprint access, LED display, Alarm System, auto secure mode, combination lock with digital keypad. Godrej Interio or techno-commercial equivalent.

Rana Construction Co

BHARAT BUILDERS

Capital Construction Company

agarwal and company

BHARAT BUILDERS

Capital Construction Company

agarwal and company

SK INDUSTRIES

BHARAT BUILDERS

Rana Construction Co

agarwal and company

SK INDUSTRIES