Installation of 2 Nos VCB with Interlocking system at 3.3KV O/H line for primary control of 750 KVA 3.3KV/440V Transformer at new crusher sub-station and 3.3KV O/H line at old crusher for O/H line controlling of Karma Project under Kuju Area

Amount

A. Making Of Foundation

Supplying and making outdoor cable end termination with heat hrinkable jointing kit complete with all accessories including ugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required 70 SQMM

Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 3.3 KV overhead lines with rated voltage 5 KV (rms) with a nominal discharge current rating of 2.8 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required

Supply & Fixing of copper cable single core flexible type 1100 voltage grade 10 sq mm

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supply & Fixing of Copper Tubular Lug 10 sq mm

Brick work with common burnt clay modular bricks of class designation7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) 2 Mtr X 1.5 Mtr X 0.24 Mtr X 2 side X 2 Nos = 2.88 CUM 2.52 Mtr X 1.50 Mtr X 0.24 Mtr X 2 side X 2 Nos =3.62 CUM

Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size) 2 Mtr X 3 Mtr X 0.24 Mtr X 2 Nos = 2.88 CUM 2 Mtr X 0.12 Mtr X 0.24 Mtr X 2 side X 2 Nos= 0.22 CUM 2.52 Mtr X 0.12 Mtr X 0.24 Mtr X 2 side X 2 Nos= 0.28 CUM

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1cement : 3 coarse sand), finished with a floating coat of neat cement.18 mm thick

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m inwidth as well as 10 sqm on plan) including disposal of excavatedearth, lead upto 1.5 m, disposed earth to be levelledand neatly dressed. 2.8.1 Ordinary rock 2 Mtr X 3 Mtr X 0.75 Mtr X 2 Nos =9 CUM

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 2 Mtr X 2.52 Mtr X 1.24 Mtr X 2 Nos =12.48 CUM

B. Interlocking arrangement with GOAB

Supply & Fixing of limit switch 1 NO + 1 NC, 110Volt AC/DC

Supply & Fixing of Cable 2.5sq mm x 2 core copper

Supply & Fixing of Auxilary Contractor 2 NO + 2 NC, 110V, AC/DC

Supply & Fixing of GOAB 11KV grade, 630Amp horizental type

Supply & Fixing of Drop out fuse 11KV Grade capacity, 400Amp

Erection of pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required.Above 10.00 metre and upto 12.00 metre

Supplying and erection of 11 KV pin insulator complete with largesteel head G.I. pin, nuts, washers etc. as required.

Supplying and erection of a set of cross bracing FRLSame workfor 11 KV over head line double pole structure having four membersfabricated out of 50 mm X 50 mm X 6 mm angle iron to form a rectangle of minimum size 1400 mm width X 2500 mm height ,complete with 50 mm X 6mm M.S. flat iron clamps, bolts andnuts including drilling holes for insulator pins, bolts and nuts etc(as per drawing) and painting with primer and finish paint as required.

Supplying and erection of bow stay set complete (galvanised)with 19/20 mm dia X 1.8 metres long stay rod, anchor plate ofsize 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle( 20 mm X 60 cm ), 7/ 4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 40 mm nominal size ) foundationincluding excavation and refilling and also with 0.6 m long braceof size 50 mm X 50 mm X 6 mm angle iron with 50 mm dia pulleyfixed at one end of the brace as required.

Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm(7.14 kg per metre) double pole cross arm for three wire 11KVover head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded onone side to the channel iron and with bolts and nuts on the otherside for tying the cross arms together, including drilling holes forinsulator pins/ fittings, bolts, nuts and washers etc (as per drawing)and painting with primer and finish paint as required.

Fabrication and errection work of irno and steel platform, column, bracing housting. Placing etc. Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Total impact of GST for the purpose of CTC

Sandeep and Co.

M.k. Traders