Renovation and Windenig work of Bitumineous Road from Durga Mandir (Near Mithlesh Singh House ) via Kali Sthan, JMK School, Jinagora Kha Krisna Yadav House, Shiv Mandir Jinagora Khilaan Dhowra to Upendra Paswan House (Seth Kathi ) in ward No. 48

Construction of Sub - grade and Earthen Shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2)

Prime coat (Providing and applying primer coat with Bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.)

Tack Coat on Bituminous surfaces Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

B Dense Graded Bitumenous Macadam Grading-II with VG-30 Grade Packed Bitumen (Providing and laying bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading premixed with bituminous binder, @ 4.5 percent by Weght of total mix and filler to achive the required grade level and alignement, rolling with smooth wheeled, Vibratory and tenem rollers to achieve the desired compaction as per MORT&H specification clause no. 505 complete in all respects.

Bituminous concrete Grading - II with VG - 30 Grade packed Bitumen. (Providing and laying bituminous concrete, with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @5.4 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor, control to the required grade, level and alignment, rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause no. 507 complete in all respects.)

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 The finished surface to be level, uniform and free from

Retro-reflectorised Traffic signs (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60cm below ground level as per approved 8.4 (ii) 60cm equilateral triangle

8.4 (v) 60cm x45 cm rectangular

8.4 (vI) 60cm x 60 cm square

Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item - A) and disposal of excavated earth as obtained to a distance upto 50 including all lift, leveling ramming the foundation trenches. removing roots oftree shrubs all complete as per approved design, building specification and direction fo E/L. [SOR - 5.1.1]