Provn of 09 x toilets with bathroom in Bldg No P-11 (OR Md Accn) at MH Dehradun, RCC drain cover with approach path from Bldg No P- 278 to 298 at Anarwala, FOL store at MT behind Bldg No P-23 of 2/9 GR at Ghunghora Cantt, 08 x urinal points behind

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as foundation filling mass concrete or in sub base of floor complete all as specified and directed by Engr-in-Charge.

M&L cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in surface channels and drains including necessary form work complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar (1:6) complete all as specified and directed (using old size bricks).

M & L PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in parapets and railings upto 60 cm in height, coping, kneelers, apex stones, bed plates, water troughs and the like including wiathering, slightly rounded or chamfered angles and throating, necessary formwork etc complete all as specified.

M&L rendering 15m thick on other than fair faces of brick work in CM 1:4 and finished surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-charge

M&L for hardcore of broken stone or boulder of gauge n. exc 63 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces,complete all as specified and as directed.

M&L for reinforced cement concrete (1:1.5:3) type A-1 (using 20 mm graded crushed stone aggregate) as in foundations, includng rafts, footings, foundation beams, plinth beams, bases for columns, etc basement slabs, under reamed piles and mass concrete complete all as specified & directed.

Use and waste form work to soffits of suspended slab such as roof slabs, floor slabs, landing and similar works, not exceeding 200mm thick for fair finished surfaces of concrete complete all as specified and directed.

S&F mild steel TMT bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia as specified .

S&F mild steel TMT bar 08 mm dia, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia as specified .

S&f TMT bars 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for 75mm thick cement concrete (1:3:6) type C-2 (using 20mm graded stone aggregate) as in sub base of floor for laying floor finish complete all as specified and directed.

M & L for coloured prepolished rubber moulded chequred cement concrete tile 30 cm x 30 cm x 20 to 22 mm thick with 3 mm spacer bar, set, jointed and pointed in neat cement slurry as in floor with grey cement and filling joints with colour pigment over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep in soft/loose of soil for foundation, etc. or for shafts, wells, cesspits, manholes, pierholes, etc. and getting out complete all as specified and directed.

M&L for preparing new surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M&L PCC (1:3:6) type C-1 (using 20mm graded aggregates) as in coping on top of walls including necessary weathering, slightly rounded or chamfered angles and throating and necessary form work complete all as specified and directed.

M&L for broken glass coping on top of walls in CM 1:3 complete all as specified and directed.

Returning, filling in soil including spreading, leveling watering and well ramming in layers not exceeding 25 centimetre complete all as specified and directed.

Removing excavated surplus soil/material exceeding 250 metre nexc 500 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre means radius built in cement mortar 1:4 in half brick thick wall complete all as specified and as directed.

M&L for providing damp proof course 40 mm thick in cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) to horizontal or vertical surfaces mixed with integral water proofing compound as per manufacturere instructions including necessary formwork complete all as specified and directed. NOTE:- Water proofing compound shall be measured and paid seperately.

M&L for precast reinforced cement concrete (1:1.5:3) type A-1 (using 20mm graded stone aggregate) as in landings, cover slabs ( for manholes etc.), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including necessary form work, set in cement mortar 1:6 complete all as specified and directed. (Reinforcement shall be measured and paid for separately under respective item of schedule 'A')

M&L for use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, verticle or to batter surface finished rough complete all as specified & directed.

M&L rendering 15m thick on fair faces of brick work in CM 1:6 and finished surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-charge

M&L for applying three coats of white wash on walls including preparation of newly plastered surface or un-plastered surface of walls complete all as specified and directed.

M&L for moorum/red bajari filling in floors or pavings, laid in layers n.exc 15cm thick, spread, levelled and rammed including watering all as specified and directed.

M&L 25 mm thick cement concrete (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in floor for laying floor finishing the cement conc even and rough to receive the floor tiles complete.

M&L for coloured joint free non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15mm thick in CM 1:6 complete all as specified and directed .

M&L for coloured digital ceramic tiles in vertical surface of size 375 x 250 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10 mm thick in cement mortar 1:4 finished roung to fix tiles complete all as specified and directed.

M & L for 75mm thk PCC 1:3:6 type C-2 as in plinth protection, finished even and fair without using extra cement. The plinth protection shall be laid in alternate bays nexe 2 sqm with 10mm wide joints filled with bitumen mastic comprising of 1 part of hot bitumen 85/25 grade and 3 parts sand all by weight complete all as specified.

S&F factory made steel windows with side hung shutters including box type hinges with steel handle, 125 mm tower bolt 02 Nos in each leaf and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified & directed.

S&F factory made steel windows with side hung shutters including box type hinges with steel handle, 125 mm tower bolt 02 Nos in each leaf and steel peg stay complete with glazing bars, dovetailed or weldedcomplete all as specified & directed.

S&F Steel ventilator with top hung shutter including box type hinges, steel peg stay, with glazing bars, dovetailed or welded complete all as specified and directed.

S&F Solid PVC solid factory made Door frame of size 50mm x 47mm made out of 5mm single side prelam single piece extruded pvc profile and edgs will be painted to match with prelam sheet , PVC sheet are to be reinforced with 19x19mm MS square tube EPDM rubber gasket weather seal shall be provided through out the frame. The profile shall be mitre cut at two corners and joint by insrting 2 nos of 150mm long backets of 15mmx15mm MS square tube inside the 19mmx19mm MS square tube and suitably screwed and fixing in opening as per specification & drawing.

S&F factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed by Engr-in-Charge.

S&F 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) both side prelam consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side prelam plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified.

S&F alluminium anodized barrel tower bolt 150mm length of bolt, ISI marked complete all as specified.

S&F alluminium anodized handle, ISI marked complete all as specified of size150mm.

S&F 100 mm size stainless steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as directed by Engineer- in -Charge.

M & L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. 0.5 sqm each pane complete all as specified and directed.

S&F mild steel framed work for such as door frames, grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door, railings and similar work complete conforming to Fe-290 Gde E-165 complete all as specified & directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description over 10 cm width and girth including preparation of surfaces complete all as specified and directed.

Supplying, fixing, jointing and testing galvanised steel water tubing 15 mm dia bore medium grade with all fittings such as bends, tees, nipples, elbows, socket reducers, etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.

Supplying, fixing, jointing and testing galvanised steel water tubing 20 mm dia bore medium grade with all fittings such as bends, tees, nipples, elbows, socket reducers, etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.

M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth in Brick/ RCC complete all as specified and directed.

S&F Vitreous China Urinals, half stall type white (back or corner wall type), complete including providing and fixing plugs, bedding urinals against wall in CM 1:2, securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, CP waste coupling, waste pipe, automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete. complete all as specified and as directed by Engr-in-Charge.

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) water closet, including connection to trap and to flushing pipe, anti syphonage pipe etc, and making good to floor complete all as specified and as directed by Engr-in-Charge.

S & F 10 litres capacity PVC low level valve less symphonic action type flushing cistern white with inlet, float valve, float and handle including brackets with 32 mm dia PVC pipe of suitable size complete all as specified and as directed by Engr-in-Charge.

S&F PVC connection , 15mm size with two CP brass nuts, length of connection 450mm to 600mm long complete all as specified and directed.

S&F rotational moulded polyethylene 500 Ltrs Capacity water storage tanks three layered, (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia ball valve PTMT, with polythelene float and fly nut including 20mm dia GI medium grade over flow pipe , approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end complete all as specified and directed.

S&F 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

S&F white vitreous china oval type counter top wash hand basin of size 550 x 400 mm including 32 mm dia brass waste coupling, 32 mm dia PVC waste pipe complete all as specified and directed.

S&F 15mm dia swan neck pillar tap (for oval type WHB) brass chromium plated with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, and fixed complete all as specified and as directed by Engr-in-Charge.

S&Fconcealed stop cock, fancy type, brass chromium plated with round heeaded knob suitable for 15mm bore iron pipe, complete all as specified.

S & F fancy type 125 mm size brass chromium plated shower rose with shower arms with swivel joints including fixing to steel pipe of 15 mm dia or union complete all as specified and directed.

S & F brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule complete all as specified and directed.

S & F 15 mm bore bib taps, chromium plated cast copper alloy long body, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F soap dish, brass, 100x100x60mm chromium plated,fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed.

S&F 20 mm dia brass chromium plated tubular towel rail, D type, 60 cm long between flanges fixed with rawl plug complete all as specified and directed.

S&F 75 mm dia PVC (SWR) floor trap, with CP grating including jointing to waste pipe in lead joint and fixed in cement concrete 1:2:4 type B1(using 20 mm graded stone aggregate) complete all as specified and directed.

S & F PVC (SWR) soil waste & vent pipe in any length without ears laid in floors, trenches or fixed to wall complete for 75 mm dia bore of pipe complete all as specified and directed.

S & F PVC (SWR) soil waste & vent pipe in any length without ears laid in floors, trenches or fixed to wall complete for 110 mm dia bore of pipe complete all as specified and directed.

S & F PVC (SWR) bends, T, reducer any radius with rubber ring joints, fixed to wall / floor / in trenches complete all as specified and directed for 75 mm dia pipe complete all as specified and directed.

S & F PVC (SWR) bends, T, reducer any radius with rubber ring joints, fixed to wall / floor / in trenches complete all as specified and directed for 110 mm dia pipe complete all as specified and directed.

S & F 110 mm dia PVC (SWR) vent cowl complete all as specified and directed.

S & F 75 mm dia PVC (SWR) vent cowl complete all as specified and directed.

S & F steel work in tubular truss, poles including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 quality-A all as specified and directed

S&F structural steel work as in Roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framimg (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc. Structural steel conforming to Fe-410W, Grade-E 250, Quality 'A' complete all as specified and directed.

M&L Pre-painted galvanlume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strangth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed

M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns, in floors, roofs, landing balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in lintel/lintel bend etc complete all as specified and directed.

M&L form work for lintel and RCC/PCC bend in wall etc to fair finshed surfaces complete all as specified and directed.

S&F alluminium anodized barrel tower bolt extruded section 200mm length of bolt, ISI marked complete all as specified.

S&F mild steel butt hinges medium weight cold rolled, 100mm size ISI marked complete all as specified.

Supply and fix CP grating 125 dia round fix on floor/ nahani trap with hole/without fixed with cement mortar, complete all as specified and directed.

S&F 15mm dia stop valve cast copper alloy , screwed down high pressure with cluch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and directed.

S&F 20 mm dia stop valve cast copper alloy , screwed down high pressure with cluch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F 110mm PVC (SWR) 'P' trap complete all as specified and directed

Supply, fixing, laying & testing 25 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 375mm x250mm x6-7 mm thick or 450mmx350mmx7mm on vertical surface such as skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including 10 mm thick bedding layer in cement mortar (1:4) finished rough to fix the tiles complete all as specified and directed.

M&L 50 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base floor for laying floor finishing complete all as specified and directed.

Supply only liquid water proofing compound Dr. Fixit / Fosroc complete all as specified and directed.

M&L for applying three coats of white wash on ceiling including preparation of plastered surface complete all as specified and directed.

M&L for construction of soakage well, internal dia 1.80M dia & overall depth 3.00M including excavation in any type of soil complete all as specified and shown on TD drawing & directed.

S&F 150mm internal dia of pipe salt glazed stoneware drain pipes, laid in trenches and jointed in cement & sand mortar 1:1, complete all as specified and directed.

M&L for concrete in PCC (1:3:6) type C-2 ( using 40 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed .

Supply & fixing on site LLDPE septic tank 05 users (1000 ltr capacity), designed to carry sewage and sludge, including excavation in any type of soil, PCC (1:4:8) type D-2 ( using 40 mm size stone aggregate) in foundation, vent shaft, connections etc complete all as specified and directed. Make : Supreme Industries/ Sintex or equivalent as approved by GE)

S&F steel windows or ventilators, fixed type with glazing bars complete all as specified and directed.

S&F steel windows or ventilators, fixed type without glazing bars complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.50 cum, getting out , returning, filling in & ramming earth or borken rubble mixed with earth around, in layers not exceeding 25 cm, watering & removing surplus soil to a distance n exc 50m & making good surface.

S&F mild steel screw bolts 11 to 15 mm dia (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 5 cm but n exc 10 cm long.

M&L for cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or PCC 1:2:4 type B-1, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc. half brick but not exc. one brick complete all as specified and directed.

M&L 40 mm thick cement concrete type B-1, 1:2:4 ( using 20 mm graded stone aggregate as in hardstanding/ floor using matellic hardner laid in alternate bays of approved make (Make : Fosroc, CICO,) and filling joints with and including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete all as specified and directed.

Taking down cement or cement lime plaster on walls any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.

M&L for 75mm thick cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of floor for laying floor finish complete all as specified and directed.

M&L sand filling under floors or infoundations including watering and consolidation complete all as specified & directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm tickness , M-40 grade, set, jointed and pointed in neat cement slurry in floors with grey cement & pigments all as directed by Engineer-in-Charge.

M&L PCC (1:2:4) type B-1 (using 20mm graded aggregates) as in benching, coping, hold fast block etc including necessary weathering, slightly rounded or chamfered angles and throating and necessary form work complete all as specified and directed.

Supply only integral water proofing compound complete all as specified & directed.

M&L RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in beam, cantilevers, lintel, chajjas etc. complete all as specified and directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc, including support of fair finished surfaces complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x 200mm, 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match complete all as specified and as directed.

M&L for providing precast cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) in louvers and jallies, 35 mm thick (measured solid), including all mouldings form work etc as required but excluding frames, set in cement mortar (1:4) complete all as specified and directed.

Cutting 25 mm dia bore exisiting steel tubing for alteration or addition in any position (each cut to be measured) complete all as specified and directed.

M&L 32mm dia high density polythelene pipe (HDPE) of pressure rating 6 Kg per cm2 fixed to wall to floor etc. complete all as specified & directed.

M&L for towel rail 450 mm long of PTMT (minimum weight 170 grm) fixed with and including chromium plated brass screws & washers and wooden / plastic cleats complete all as specified and directed.

S&F regular modified polyster coated coloured galvanised profile sheet (plain profile) 0.50 mm thick (Inclusive of protective coating) as in ridge, hip, valley gutters and flashing to wall fixed to iron/wooden members with self drilling/ self tapping zincoulium coated metal screws having cap with rubber and metal washers complete all as directed.

S&F rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410-W (Gde-E-250) quality A complete all as specified and directed.

M&L for Reinforced cement concrete 1:1.5:3 type A-1 (using 20 mm graded crushed stone aggregate) as in columns, pillars, piers, posts and structures etc, complete all as specified and directed.

M&L RCC 1:1.5:3 type A-1 (using 20 mm graded crushed stone aggregate) as in Beams, cantilevers, bressumners, lintels over 1.5m span complete all as specified and directed.

M&L RCC 1:1.5:3 type A-1 ( 20 mm graded aggregate) as in chajja complete all as specified and directed.

M&L for RCC 1:1.5:3 type A-1 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns, in floors, roofs, landing balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for use and waste formwork to sides of pillars, posts, struts, piers, columns and stanchions shape rectangular or polygonal for fair finished surfaces of concrete square, complete all as specified and directed.

M&L for form work to chajja,water trough and similar items including edges for fair finished surfaces of concrete complete all as specified and directed.

M&L form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs, sides of RCC/PCC bands in walls, horizontal or sloping and similar works exc 10 cm but not exc. 20 cm wide for rough finished surfaces of concrete complete all as specified and directed.

M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in flooring finished even and smooth using extra cement complete all as specified and directed.

M&L for rendering 10mm thick on ceiling in cement mortar 1:3 including finishing the surface even & smooth without using exta cement complete all as specified and directed.

M&L for machine cut kota stone slab 550 x 550 mm ( pre-mirror polished) as in flooring 20 to 22 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing with & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed

M&L for machine cut kota stone slab 550 x 550 mm ( pre-mirror polished) as in skirting etc 15 to 18 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing with & including screed bed or bedding layer of mortar 10 mm thick in cement mortar 1:4 complete all as specified and directed

S&F mild steel 300mm long, ordinary rat rail rod pattern spring including roller and roller plate (Helical door spring) for door shutter complete all as specified & directed.

M&L for cleaning of roof slab including picking, sweeping clean and washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane, complete all as specified and described as under:- (a) Providing screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 over roof surface mixed with WPC (WPC will be paid seperately) (b) Preparation of RCC roof surface and applying one coat of polymeric primer @ 0.30 kg / sqm . (c) Supply & providing polymeric water proofing membrane 3 mm thick of weight not less than 3.60 kg / sqm reinforced with polyester non-woven fabric (weight not less than 150 gms/Sqm) centre core including coating the surface with the compatible primer and torch application of membrane with 10 cm overlaps as required thereof, complete all as specified and directed. (d) Applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over which one coat of aluminium bituminous paint @ 0.20 Kg/Sqm shall be applied. NOTE:- The work of water proofing treatment shall be got executed throughh expert team of manufacturers or authorised applicator of manufacturer.

S&F aluminium anodised door single/ double shutter with frame size 63 x 38 x 2 mm and 44 x 44 x 2 mm for all other members and 100x 44 x 2 mm for bottom and middle rail, channel tracks including gasket aluminium cleat 6 mm dia rounded bars, 5 mm thick tinted glass panes top and prelaminated particle board bottoms including aluminium handle hinges and locking arrangement, sliding rail, rollers etc complete all as specified and directed.

M&L for Point wiring with1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multistranded copper conductor single core FRLS cable drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty) 20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel suction box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sinking's for boxes and making good to walls,floors etc complete all as specified and directed by Engr.-in-charge of following. Note : The wiring to be done as per IE rule and maintain colour code accordingly.

One light point , controlled by one way switch.

One Exhast fan point , controlled by one way switch through Regulaor

One three pin 5 Amp socket on same board with other switches

One three pin 5 Amp socket on independent board

All as per Item No 131.00 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 2.5 Sqmm FRLS copper conductor for continuous earthing complete.

S & Fix Switch piano flush type single pole one way 230 Volts 6 Amp complete all as directed.

S & Fix Socket outlet 3 pin , 230 Volts 5/6 Amps flush type multipurpose 5 pin complete all as specified and directed.

Supply and fix Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type IS: 1239-1988 marked with valid CML No complete all as specified.

Supply and fix Switch piano; flush type, single pole, one way, 230 Volts 15/16 Amps IS: 3854 marked with valid CML No. complete all as specified and directed.

Supply and fix Ceiling rose, Three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified.

S & Fix Lamp holder polycarbonate insulated body, with back plate suitable for batton fitting.

S&F wall mounted LED tube light fitting 1x20 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed. Make: Philips cat part No BN 021 C LED 20 S PSU CW GR S2 /Havells ENDURALINEARNEOBS20W LED840SPCWH / Wipro LL20-281-XXX-65AL1

S&F energy saving ,surface mounted, LED 10 watt Bulk head luminaire with decorative oval diffuser comprrising of high brightness LEDs complete all as specified and directed by Engr-in-charge. Make : CG cat LBHP-10-CDL/Philips WT140W LED7S CW PSU S1 PC/Havells ENDURA RUGBYNEO N /Mepro cat no BCL 23 Plain

Supply and fixing Distribution board SPN 4 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection.Note:- DB and MCCB/MCB shall be of same make.

S&F MCB single pole 240 volt, 10 KA, 5-32 Amp, 'C' series confirming to IS complete all as specified and directed.

S&F MCB SPN 240 Volt 10 KA 32 Amp 'C' series conforming to IS complete all as specified & directed.

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized wire 4 mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 15 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 5 of SSR part 1 including testing on completion all as specified and directed.

Supply & Laying XLPE insulated armoured heavy duty electric cable , with multi stranded aluminium conductor served with an inner sheathing of PVC type armoured with galvanized steel wire or tape and PVC sheathed 1100 volt grade,nominal cross sectional area 10 Sqmm 2 core inclu lugs and heat shrinkable PVC Sleeves on exposed surfaces & teflon tape duly insulated complete laid in trenches, ducts, drawn through pipe across the road/path/alongpoles/wall/floors/equipment etc including jointing and testing complete all as specified and directed by the Engr-in-charge.

M&L for sand cushioning in trenches for protection of UG cable with river based sand laid dry in trenches before and after laying of cable, incl well ramming complete all as specified and directed

M&L for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified & directed.

Supply & Laying of GI Steel tubing light grade 50 mm dia including all fitting laying in trenches across road or grouting /fixing on wall for protection of cable complete all as specified and directed by Engr-in-charge.

Supply & laying vibration free Exhaust fans AC single phase 230/240V of size 300mm sweep double ball bearing 900 rpm with louvers making necessary fixing arrangements on wall with hold fasteners 4 Nos nut &bolts connecting with three core flexible copper conductor cable (23/.0060)from ceiling rose complete all as specified and directed.

S&F mirror light decorative compact luminarious with decorative ends caps 6 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.

M&L sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with Two runs of 4 Sqmm as current carrying conductor and one run of 2.5 Sqmm as earth conductor PVC insulated FRLS cable with multi stranded copper conductor of nominal cross section area as under and drawing into and including concealed PVC non metallic rigid conduit medium grade complete all as specified. Note:- Two runs of wire and one run of earth wire shall be measured as one meter only for payment purpose.

S&F, MCB DB, sheet metal enclosures double door SPN 10 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F, MCB SPN 40 to 63 Amps, 240 volts 'B' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.

S&F, MCB SP 240 volts, 6 to 40 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.

S&F exhaust fan 300 mm sweep single phase 240V, 1400 RPM heavy duty metallic blade with louver including connecting with twisted twin cord flexible copper conductor cable (23/0.0076) from ceiling rose complete all as specified and directed.

S&F Geyser Vertical Storage type of capacity 25 Ltrs having minimum 5 star rating as per BEE certification, ISI marked having stainless steel storage tank , rock wool insulation, 2 KW element, thermostat, system On/Off indicator lamps, safety valve, pressure release valve, inlet & outlet connections with suitable size hot and cold PVC nylone braided pipes 2 Nos connected to water supply line including three core power cord with 15 Amp top, grouting of four nos hold fastners/Tee bolts of suitable size etc for fixing of geyser to wall complete all as specified and directed.

S&F single pole and neutral encloseure with a two pin and earth plug and socket complete with one single pole MCB-20A complete all as specified.

S&F PVC connection pipe (suitable to cold water) of 15 mm dia, 450 mm long with two brass CP hexagonal nuts adopter rubber washer complete all as specified..

S&F PVC connection pipe (suitable to Hot water) of 15 mm dia 450 mm long with brass flexible tube alongwith CP Hexagonal nuts adopter rubebr washer complete all as specified..

M/s Anil Kumar

AYUSH CONSTRUCTION COMPANY

SARASWATI CONSTRUCTION CO

M/s RP AGRAWAL

M/S C S AITHANI