Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.4 LAccepted-Finance | ₹5.4 L | L1 | Accepted-Finance Accepted Vide Resolution No.6 (1) dtd.10-09-2026 of Edarikkode GP |
| 2 | L2₹5.6 L+₹21,410.52 (3.97%)Accepted-Finance ANGANVADI ROAD RE CONCRETING GENERAL CIVIL WORK RETENDER | ₹5.6 L+₹21,410.52 (3.97%) | L2 | Accepted-Finance Second bidder. Kept in abeyance till the execution of agmnt by the First Bidder |
| Sl No | Description | Qty | Unit | JABIRJASEEM L2 | AHAMED KABEER K L1 |
|---|---|---|---|---|---|
| 1.00Maintanance work | |||||
| 1.00 | 11.41.1:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 500x500 mm. | 35.2 | sqm | 250 ₹8,800 Lowest | 1,675.29 ₹58,970.21 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 942.33 | kg | 160 ₹1,50,772.8 Lowest | 187.27 ₹1,76,470.14 |
| 1.00 | OD516836/2025-2026:Providing and fixing precoated galvanised iron profile sheets(size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.35 mm(+0.05%), total coated thickness with
zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid scratches during transportation and
should be supplied in single length upto 12 meter or as desired by Engineer in charge. The sheet
shall be fixed using self drilling/ self tapping screws of size (5.5*55mm) with EPDM seal,
complete up to any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting to size and shape wherever required | 27.6 | sqm | 1,200 ₹33,120 | 624.47 ₹17,235.37 Lowest |
| 1.00 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 410.96 | kg | 180 ₹73,972.8 | 178.64 ₹73,413.89 Lowest |
| 1.00 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 61.15 | sqm | 90 ₹5,503.41 Lowest | 165.08 ₹10,094.48 |
| 1.01 | 13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 674 | sqm | 80 ₹53,920 | 20.5 ₹13,817 Lowest |
| 1.01 | 13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work | 674 | sqm | 120 ₹80,880 | 114.07 ₹76,883.18 Lowest |
| 1.01 | 15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below | 4.89 | each | 2,500 ₹12,225 | 380 ₹1,858.2 Lowest |
| 1.01 | 50.9.4.1:Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood | 1.89 | sqm | 3,000 ₹5,670 Lowest | 3,035.67 ₹5,737.42 |
Tender Value
₹4.9 L
EMD Value
₹12,372
Closing Date
31 Aug 2026, 3:00 pmClosed
RESHMA V.P
Office of the Assistant Engineer, LID AND EW Section , Edarikode Grama Panchayat
Prj No - 257/25-26 (SO179/27)-Maintenance of Panchaytah Office
2026_LSGD_863384_28
TDR02/AE/LIDEW/EKD/2026-27
Open Tender
Civil Works - Buildings
Item Rate
300 days
EDARIKODE GRAMA PANCHAYAT OFFICE
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,095
₹12,372
18 Sept 2026
10 Aug 2026
3 Sept 2026
10 Aug 2026
31 Aug 2026
10 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Maintanance work | |||||
| 1.001 | 11.41.1:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 500x500 mm. | - | sqm | - | - |
| 1.002 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.003 | OD516836/2025-2026:Providing and fixing precoated galvanised iron profile sheets(size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.35 mm(+0.05%), total coated thickness with
zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid scratches during transportation and
should be supplied in single length upto 12 meter or as desired by Engineer in charge. The sheet
shall be fixed using self drilling/ self tapping screws of size (5.5*55mm) with EPDM seal,
complete up to any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting to size and shape wherever required | - | sqm | - | - |
| 1.004 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 1 | kg | - | - |
| 1.005 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | - | sqm | - | - |
| 1.006 | 13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | - | sqm | - | - |
| 1.007 | 13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work | - | sqm | - | - |
| 1.008 | 15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below | 1 | each | - | - |
| 1.009 | 50.9.4.1:Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood | 1 | sqm | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_1462435.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.32 MB
Tendernotice_2.pdf
PDF • 0.07 MB
Tendernotice_3.pdf
PDF • 0.25 MB
SBD.pdf
Tender Documents • 1.67 MB
PAG.pdf
Tender Documents • 0.25 MB
FOT.pdf
Tender Documents • 0.24 MB
AFD.pdf
Tender Documents • 0.23 MB
BOQ_1462435.xls
BOQ • 0.31 MB
CORRIGENDUM.pdf
PDF • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .