ADDN ALTN TO CERTAIN BLDGS OF JCOs ORs MARRIED

Amount

Demolition of brick work built in cement mortar including all quoins, pillars, arches etc complete all as specified and directed.

M&L for brick work with sub class' B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement or cement lime plaster work from brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and as directed.

M&L for 10mm thick plastering on ceiling in CM (1:3) finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick on cement mortar 1:6 finished fair and even on fair faces of brick work without using extra cement complete all as specified and as directed..

M & L rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound finished surface even and smooth without using extra cement of external surfaces of brick/concrete wall including chajja facia, balcony, parapet complete all as specified and directed. Note :- (i) The work will be carried out up to triple storey building the rate of scaffolding is included for this item also. (ii) WPC will be measured and paid separately .

Supply only liquid water proofing compound complete all as specified and directed.

M&L applying two coat of oil emulsion distemper over a coat of primer on newly plastered or unplastered surface of wall including preparation of surfaces complete all as specified and directed.

M&L complete removal of old surfaces and applying two coat of oil emulsion distemper over a coat of primer on plaster or un plastered wall surface including preparation of surfaces, complete all as specified and directed.

M&L for preparation of wall and applying interior grade wall care putty 3mm thick to make the surface smooth complete all as specified and directed. (Note: The work will be carried out upto triple storey building the rate of scaffolding is included for this item also) Make : Berger/Asian/JK/Birla

M&L for preparation of wall and applying exterior grade wall care putty 3mm thick to make the surface smooth complete all as specified and directed. (Note: The work will be carried out upto triple storey building the rate of scaffolding is included for this item also) Make : Berger/Asian/JK/Birla

M&L for preparation of new plastered surfaces of external wall (up to triple story of Bldg) and applying two coats of 1st quality exterior emulsion weather coat paints over a coat of alkali resistant priming paint complete all as specified and directed. Make : Nerolac Excel mica marble/Asian paint Apex ultima/Berger weather XP Advance coat long life.

M&L complete removal of old painted surfaces of external wall with scrapping, wire brushing, washing with water preparation of old plastered surfaces of external wall (upto triple story of Bldg) and applying two coats of 1st quality exterior emulsion weather coat paints over a coat of alkali resistant priming paint complete all as specified and directed. Make : Nerolac Excel mica marble/Asian paint Apex ultima/Berger weather XP Advance coat long life. Test Certificate to be submitted by Contractor. Note:- Preparation shall be done by mechanical hand held grinder and the work will be carried out upto triple storey bldg the rate of scaffolding is included for this item also.)

M&L for preparing surfaces plastered or unplastered new surface of ceiling and applying three coats of white wash on wall surface complete all as specified and as directed by Engr-in-Charge.

M&L for preparing old surfaces of ceiling and applying two coats of white wash complete all as specified and directed .

Demolition of PCC/terrazzo in ground floor and paving n.exc 15 cm below or above ground level including tiles stone etc complete all as specified and directed..

M& L for PCC 1:2:4 type B-0 using12.5 mm graded stone aggregates as in padding on chajja, benching and etc work complete all as specified and directed.

M&L PCC 1:3:6 Type C-1 using 40mm graded stone aggregate as in surface channel and drain complete all as specified and as directed.

Extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including form, moulds, mitred, stopped ends etc complete all as specified and directed.

M& L PCC 1:2:4 type B-1 (using 20 mm graded stone aggregates) as in coping, benching, anchorage blocks, lintels up to 1.5m clear span, cills, steps, seismic & other similar bands, plinth course, lacing course, parapets & railing up to 60 cm in height, coping, kneelers, apex stones, bed plates, kerbs not provided for water trought & the like including weathering, slightly rounded or chamfered angels & throating complete all as specified and directed.

M&L for cement concrete type B-0 (1:2:4) using 20mm graded aggregate as in flooring 25mm thick rough finished surface complete all as specified and directed.

Roughening surfaces of old concrete floor by picking with chisel, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of debris complete all as specified and directed.

M&L 20mm thick screed bed or bedding layer in cement mortar 1:6 as in floor complete all as specified and directed.

M&L 8-10mm thick tile adhesive bed or bedding layer for fixing of floor tiles as per manufacturer instruction complete all as specified and directed. Make : Kajaria/Johnson/Dr Fixit/BASF/CIPY/SIKA.

S&F joint free non skid colour ceramic tiles premium quality 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in neat cement slurry and pointed in white or coloured cement to match the existing surface complete all as specified and directed. Make : Rectified tiles Premium quality of Kajaria/Johnson marbonite/Orient bell

S&F joint free non skid colour ceramic tiles premium quality 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in neat cement slurry and pointed in white or coloured cement to match the existing surfaces complete all as specified and directed. Make : Rectified tiles Premium quality of Kajaria/Johnson marbonite/Orient bell

M&L for rendering 15 mm thick in cm 1:4 for dado & skirting on brick/concrete wall surface finished rough and even for receiving tiles in vertical surfaces complete all as specified and directed.

Material and labour non skid colour ceramic tiles of 7 to 8 mm thick (square/rectangular) area of each the exceeding 0.11 sqm but not exceeding 0.18 sqm of approved 1st quality in skirting/dado etc set and jointed in neat cement slurry and pointed in white / coloured cement to match coloured tiles all as specified and directed. Make : Rectified tiles Premium quality of Kajaria/Johnson marbonite/Orient bell

M &L Glazed digital Ceramic tiles coloured, of size 300mm x 450mm x 6 to 7mm thick approved 1st quality as in vertical surfaces such as skirting/ dados etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles all as specified and directed. Make : Digital tiles Premium quality of Kajaria/Orient bell/johnson

M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match shades of the slab complete all as specified and directed. Note:- Kota slabs shall be pre polished.

M& L pre polished Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with neat cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L 18 to 20 mm thick machine cut polished granite 1st quality "black" stone slab over kitchen platform and similar places over and including 15mm thick screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match with existing surface including demolition of existing stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including grinding and moulding of exposed edges of granite complete all as specified and as directed. (Note :Sample of granite shall be passed by GE before execution of work)

M & L 75mm thick PCC 1:3:6 type C-2 as in plinth protection, finished even and fair complete all as specified and directed.

Taking up or down steel tubing and connections with all fittings for 15 mm bore GI tubing complete all as specified and directed..

Taking up or down steel tubing and connections with all fittings for 20 mm bore GI tubing complete all as specified and directed..

M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 ltr capacity including flush pipe and connected items complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts, of 450 mm length complete all as specified and directed.

S&F in repair 15mm bore Bib taps complete all as per make :- JAGUAR CAT Part No ALI-85037 or equivalent in Kohler,Grohe.

S&F in repair 15 mm bore Angle cock/stop valves, complete all as per make :- JAGUAR Cat Part No FON-40053 or equivalent in Hindware, Parryware.

S&F in repairs CP brass concealed stop cock for shower 15mm dia ISI mark complete all as specified and directed.

S&F in repair brass chromium plated over head shower with shower arm complete all as per make : - Jaquar Cat Part No OHS 1999 (Shower) & SHA479L300 (Arm) or equivalent in Hindware, Parryware. Note : Contractor shall submit Warranty certificates for item No 42,43 & 45 from original manufacturer and payment for these items shall be released to contractor only after receiving purchase vouchers and warranty certificates from original manufacturer.

S&F in repairs vitreous china water closet (squat pan) Orissa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provision of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed including 100 mm CI Long Arm hables P Trap complete all as specified and directed. Make : Hindware/Parryware/Jaquar.

M&L for taking down of existing sunken slab treatment from the sunken portion and removing of existing filling of sunken, cleaning the surfaces washing down with water and rubbish off the premises, cleaning and filling cracks with sealing compound, brushing neat cement slurry @ 3.00 kg/sqm and grouting 25mm thick cement concrete type B-0 (1:2:4) (using 12.5 mm graded stone aggregate) on sunken slab portion including filling of brick bats and finishing the top surfaces even and smooth without using extra cement. (b) M&L for two coat of acrylic cementitious water proofing coating (Dr. FIXIT pidifin 2K manufactured by M/S Piditite Industries Ltd or equivalent) and followed by a overlay protective screed bed15mm thick in CM(1:3) along with liquid water proofing compound of approved make on top surfaces of sunken slab after preparation as mentioned above method of application for acrylic cementitious water proofing coating is followed as per manufacturers instructions complete all as specified and directed.

S & F in repair stainless steel grating square 150X150 mm size with flat border complete all as specified and directed. Make : Prayag /Cera/Hindware

S&F Stainless steel cockroach Trap square of size (101X101 mm) complete all as specified and directed. Make : Prayag /Cera/Hindware

Demolition of reinforced cement concrete, shelves, chajjas, slabs and similar work carefully, matching to adjoining disturbed surfaces complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and colums, in floors, roofs, landing balconies, canopies, deck slabs, chajja and in shelves and the like, complete all as specified and directed.

M&L for form work for RCC Slab such as roof slab, floor slab etc complete all as specified and directed..

M&L form work to edges of concrete flats, treads, break in floor & roofs n. exec 20 cm wide horizontal or sloping and smilar works complete all as specified and directed.

M&L for reinforced cement concrete nominal mix (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in Chajja complete all as specified and directed.

M&L for Formwork to rough finish surfaces of chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for TMT bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

Taking down chowkat with shutter exc 1.5 sq.m but n.exc 4 Sqm each complete all as specified and directed.

Taking down chowkat with shutter n.exc 1.5 sqm each complete all as specified and directed.

Taking down shutter exc 1.0 sq.m but n.exc 2.00 sqm complete all as specified and directed.

Taking down shutter exc 1.0 sq.m but n.exc 2.00 sqm and refixing in the same opening aftrer necessary easing and repair complete all as specified and directed..

M&L for cutting holes in brick wall built in cement mortar exc half brick but nexc one brick and filling with cement concrete 1:2:4 for inserting hold fast etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including provision of suitable blocks for providing mortice locks, latches or other fittings complete all as specified and directed.

S & F 35 mm thick second class hard wood factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauze, etc. devided in to square with plain, chamfered or rounded mitred and rebated sash bars, edges of framing plain, chamfered. fitted with cut and rebated beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part -I section 8, clause 8.24 (a) complete all as specified and directed.

S&F steel window box type indluding one shop coat of primer with double rebate and double leaf with side hung shutters without glazing bars on one side and with glazing bars on other side of window frame including box type hinges with steel handle and steel peg stay, complete dovetailed or welded including taking down old unserviceable window complete all as specified and directed.Note: window shall be made as per drg No CEBZ TD drawing No. 88

Blank

S&F of power coated ventilator fixed type and frame made with aluminium section with and including partly glass and partly stainless steel wire mesh and including aluminium grill of aperture not more than 40 sqcm (as specified below), aluminium sections shall be of size as given below including taking down old window/ventilator etc complete all as specified and directed. Frame : 44.5 x 44.5 mm x 1.98 mm thick including 5mm thick frosted in glass fixed with rubber gasket with aluminium beading and stainless steel wire mesh of 0.63 mm nominal dia wire and average width of aperture 1.40 mm complete including taking down old window/ventilator etc complete all as specified and directed. Note :- (i) Making good of wall surface with matching to existing surface complete all as specified and directed by Engineer in Charge. (ii) Cost of glass and gauge shall be included in the quoted rate including taking down old complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average aperture 1.40 mm complete all as specified

M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed. (Brand : ICI Paint (Dulux Gloss), Asian Paint (Apcolite), Jenson & Nicholson Paints Ltd (Brolac), Berger Paints (Luxol Hi Gloss) & Nerolac (Nerolac Full Gloss).

M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer including preparation of old steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed. (Brand : ICI Paint (Dulux Gloss), Asian Paint (Apcolite), Jenson & Nicholson Paints Ltd (Brolac), Berger Paints (Luxol Hi Gloss) & Nerolac (Nerolac Full Gloss).

M & L applying two coats of PU synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed. Make : Asian paint, Berger, Nerolac

M & L preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of PU Synthetic enamel Paint complete all as specified and directed. Make : Asian paint, Berger, Nerolac

S&F factory made (FRP) door frame of size 75mm x 50 mm, Shade of finish complete all as specified and directed. Make & Brand : Jain Wood Industries(Brand-Jayna)/ Sintex India Ltd/ Fiberwats Technology/Krafto door.

S&F factory made (FRP) door shutter 30 mm thick door shutter consisting of styles & rails as per SSR Pt-I, Shade of finish complete all as specified and directed. Make & Brand : Jain Wood Industries(Brand-Jayna)/Sintex India Ltd/ Fiberwats Technology/Krafto door.

Dismantling of block board with iron mongry as in kitchen cabinets and making good disturbed surfaces to match with the existing complete all as specified and directed.

S&F 15 mm thick fiber reinforcement plastic (FRP) sheet of one side pre laminated colour 3mm laminated on one faces (3mm+12mm ) and edges to be sealed with PVC edges binding tape with matching colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete all as specified and directed.

S&F 18 mm thick fiber reinforcement plastic (FRP) sheet of both side pre laminated colour 3mm laminated on both faces (3mm+12mm+3mm) and edges to be sealed with PVC edges binding tape with matching colour to make kitchen cabinet Shutter/ drawer Front, cup board shutters, etc complete all as specified and directed.

S&F auto closing hinges 35 mm of 0 crank( KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and directed. Make :Hexa, Hettich, Hafele

S&F ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, complete all as specified and directed. Make :Hexa, Hettich, Hafele

S&F stainless steel handles 100 mm size for kitchen cabinet shutters complete all as specified and directed. Make :Hexa, Hettich, Hafele

S&F chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 480 x 500 x 150 mm of Grade 304 with necessary fixing clips etc. complete all as specified and directed. Make: Hettich, Hafele, Butterfly

S&F chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc. complete all as specified and directed. Make: Hettich, Hafele, Butterfly

S&F chrome plated stainless steel wire basket (plate basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc. complete all as specified and directed. Make :Hettich, Hafele, Butterfly

S&F chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc. complete all as specified and directed. Make : Hettich, Hafele, Butterfly

S&F chrome plated stainless steel wire basket (Grain Trolley) pull out type, size 480 x 500 x 200 mm Grade 304 with necessary sliding frame structure, fixing clips etc. complete all as specified and directed.Make : Hettich, Hafele, Butterfly

Supply chrome plated stainless steel wire basket (Bottle pull out) pull out type two self, size 120 x 500 x 432 mm with necessary sliding frame structure, fixing clips etc. complete all as specified and directed.Make : Hettich, Hafele, Butterfly

S&F continuous piano hinges 30mm width of flap of brass complete all as specified and directed.

S&F hasp and staple 100mm safety type, stainless steel 202 grade with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 200 mm long, solid in one piece stainless steel 202 grade bright finish barrel tower bolts 10mm dia shoot complete all as specified and directed.

S&F 150 mm long, solid in one piece stainless steel 202 grade bright finish barrel tower bolts 10mm dia shoot complete all as specified and directed.

S&F 150mm size solid in one piece stainless steel 202 grade bright finish handles, D type and fixed with stainless steel screws complete all as specified and directed.

S&F 125mm size solid in one piece stainless steel 202 grade bright finish handles, D type and fixed with stainless steel screws complete all as specified and directed.

S&F 100 mm size stainless steel butt hinges medium weight cold rolled fixed/ welded to frame complete all as specified and directed.

S&F 300 mm, mild steel ordinary rat rail rod pattern door springs including roller plate complete all as specified and directed.

S&F mild steel flat iron of size 25x3mm as in hold fast complete all as specified and directed.

S&F stainless steel sliding door bolts SS 204 grade, hasp and staple type with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 250mm long complete all as specified and directed.

S&F steel work in tubular section for stair case railing at balconies etc including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240 complete all as specified and directed..

S&F mild steel framed work as in grill, grating etc with end of bars shouldered and /or riveted or forged into spikes, frame guard bars barrel iron doors, ladders, frame balusters, walk ways, railing, door chowkat frame work of water tanks and similar works confirming to Fe 410-0 or Fe 310-0 complete as specified and directed

Hacking out old broken glass (any thickness size, quality or description) from wooden or metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

M & L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. .5 sqm each pane complete all as specified and directed.

S&F in repair 1mm wall thickness stainless steel 202 Gde drapery rod with including brackets, decorative finals at both ends & curtain rings 8 Nos (Minimum) complete all as specified and directed. Note : Sample/design shall be approved by GE.

M&L for rendering 15 mm thick on roof surfaces including facia in cement mortar 1:4 finished surfaces even and smooth without using extra cement complete all as specified and directed.

S & F in repair 75 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall including dismantling of old pipes complete all as specified and directed. Make : Supreme/Finolex/Prince. Note :- Sample of item shall be approve by GE.

S & F in repair 110 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall including dismantling of old pipes complete all as specified and directed. Make : Supreme/Finolex/Prince. Note :- Sample of item shall be approve by GE.

S & F in repair 75 mm bore UPVC (SWR) pipe 4 kgf/sqcm single socketed in any length with rubber ring, joints laid in trenches including dismantling of old pipes complete all as specified and directed. Make : Supreme/Finolex/Prince.

S & F GI light weight slotted channel of 1.5mm guage (CC2125 PG3) clamp with using U type GI hook 8 mmdia & bolt for fixing of PVC/UPVC outlet pipe including screws of any dia fixed to wall complete all as specified and directed. Note:- (i) Fixing arrangement of clamp shall be as shown in sketch 1 to 3 in PS here in after. (ii) 8 mm dia, 225 to 400mm long U type hook & bolt including washer shall be measured and paid seperately as supply and fixed under respective item.

Supply only 8 mm dia, 225 to 400mm long U type hook & bolt including washer for fixing of GI light weight slotted channel clamp complete all as specified and directed..

S & F in repair 110 mm bore UPVC (SWR) pipe 4 kgf/sqcm single socketed in any length with rubber ring, joints laid in trenches including dismantling of old pipes complete all as specified. Make : Supreme/Finolex/Prince.

S & F in repair UPVC (SWR) bend, 75 mm bore' complete all as specified and directed. Make : Supreme/Finolex/Prince.

S & F in repair UPVC (SWR) junction single, (Single T) equal or un equal, 75 mm bore with access door complete all as specified and directed. Make : Supreme/Finolex /Prince.

S & F in repair UPVC (SWR) bend, 110 mm bore' complete all as specified and directed. Make : Supreme/Finolex/Prince.

S & F in repair UPVC (SWR) junction single, (Single T) equal or unequal, 110 mm bore with access door complete all as specified and directed. Make : Supreme/Finolex /Prince.

S & F in repair UPVC (SWR) cowl, 75 mm bore' complete all as specified and directed. Make : Supreme/Finolex/Prince.

S & F in repair UPVC (SWR) cowl, 110 mm bore' complete all as specified and directed. Make : Supreme/Finolex/Prince.

S&F in repair cast iron spun cast 600 mm long 'P' trap fixed with epoxy mortar (Asian/Berger), set in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F CI spun cast floor tap 75 mm complete all as specified and directed

S&F in repair looking mirror of size 450x600mm mounted on decorative type PVC frame fixed to PVC rawal plug with CP brackets screw fixed, complete all as specified and directed.

S & F vitreous china corner wash hand basin white, size 350mm x 350mm or equivalent size including cast iron cantilever bracket, pop up brass waste coupling or requisite size and waste pipe for bottle trap including fixing of waste fitting etc complete all as specified and directed. Make :Jaquar 330x455x165MMJDS-WHT-25841or equivalent make in Hindware,Parryware.

S&F in repair 550x400mm Wash basin, vitreous China (Flat back any size ) including cutting for and pinning in ends of brackets including pop up brass waste coupling or requisite size and waste pipe for bottle trap including fixing of waste fitting bracket complete all as specified and directed. Make : Hindware/Parryware/Cera

S&F pillar taps, complete all as per make : Jaguar Cat part No. VGP81001or equivalent in Kohler, Grohe.

S&F in repair kitchen sink mixer, complete all as per make : Jaguar Cat part No. Florentine FLR-CHR-5309N or equivalent in Kohler, Grohe.

M&L for CP bottle trap with wall connection pipe & wall flange complete all as specified and directed. Make : Hindware Cat No F850015 or equivalent in jaquar,Parryware, Cera.

S & F in repair 20 mm dia towel rack of 3 sets type 60cm long between flanges including pair of fixing brackets complete all as per make: Jaquar Cat Part No AKP-35781PS or equivalent in Hindware,Parryware, Kohler, Grohe. Note : Contractor shall submit Warranty certificates for item No 121 to 124 from original manufacturer and payment for these items shall be released to contractor only after receiving purchase vouchers and warranty certificates from original manufacturer.

S & F 500 Ltrs capacity rotational moulded, triple layer white polythene water storage tank (cylindrical shape with vertical top closed) hoisted and fixed in position including dismantling of old unserviceable tank all as specified in SSR part-I complete all as specified and directed.

S&F in repair 20 mm dia ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed all as specified and directed.

S&F in repairs Gun metal gate valve iron wheel head screwed both ends for iron pipe of 20 mm bore complete all as specified. Make : Zoloto/Leader

S&F in repair stainless steel kitchen sink without draining board made of stainless steel 1mm thick 304 Grade ,coupling plug, washers and waste pipes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm X 420 mm, bowl size 410 mm X 330 mm X160 mm complete all as specified and directed. Make : Nirali model popular Grace plain anti scretch (510X432mm)) or equivalent make in silver shine blue star, Kohler, Grohe.

S&F in repair sinks with drainage board made of stainless steel 304 Grade 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including cantilever brackets of suitable angle iron, CP brass waste coupling ,superior quality PVC waste pipe and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. Make : Nirali or equivalent make in blue star,silver shine, Prayag, Kohler, Grohe.

M & L for wire netting size of mesh 12 mm of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples including dismantling complete all as specified and directed.

Demolition and breaking up drain pipe (SGSW) set in cement mortar of 150mm bore complete all as specified and directed including PCC benching complete as specified and directed.

M& L salt glazed stone ware (SGSW) drain pipe of internal dia 150mm laid in trenches and jointed in CM 1:1 grade 'A' complete all as specified and directed

M& L cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 150mm bore pipe complete all as specified and directed

M & L for cutting into existing manholes for connecting new drain, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20mm graded complete) smooth finished and reforming benching as required for internal dia of pipe 150mm complete all as specified and directed.

Excavation in trenches n.exec 1.5mtr wide and n.exec 1.5 mtr depth for foundation in soft/loose soil complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exec 1.5mtr above the starting point complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exec 25cm complete all as specified and directed.

S&F of pre cast factory made reinforced concrete cover slab of Grade M-35 in cover slabs (for man holes etc) and similar articles with plain faces set in cement mortar 1:4 all as specified and directed.

M & L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc. including demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level complete.

M&L heavy duty vitrified ceramic coloured tiles 10 mm thick dark shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. Make: Kajaria/Johnson(Marbonite) & Bell Granito(Orient)

M & L for coloured pre polished rubber moulded chequred cement concrete tile 30 cm x 30 cm x 20 to 22 mm thick with 3 mm spacer bar, set, jointed and pointed in neat cement slurry as in floor with grey cement and filling joints with colour pigment over and including 20 mm thick screed bed in cement mortar 1:6 including dismantling of old tiles complete all as specified and directed. Make: NITCO, Redsun, Mehtab.

S & F mild steel work as in main and cross beam, hip and jack rafters, purlins etc. fixed with angle cleat or other connecting plate complete confirming to Fe – 410-O or Fe – 310-O including dismantling old section complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Provn of 100 users septic tanks complete all as specified in PS-II here in before and directed. Note : As per CEBZ TD Drawing No. 217

Provn of 2.4 m internal dia X 3m effective depth soakage wells complete all as specified in PS-II here in before and directed. Note : As per CEBZ TD Drawing No. 309

Taking down carefully copper /aluminium point wiring (light, fan , socket or power ) completer, fittings such as switches, ceiling roses, pendants, regulators ,sockets , light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls/floors and reuse the serviceable fittings under respective items complete all as specified and directed.

M&L for Point wiring with1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multi stranded copper conductor single core FRLS cable drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty) 20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel suction box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly complete including making good disturbed surfaces complete all as specified and directed for following. The make of conduit & its accessories should be Supreme/AKG/Polycab and make of wire/cable for internal should be Havells/Finolex/L&T.(Note : Colour code shall be maintained as per IE rule)

(a) One light /Exhaust fan point controlled by one-one way switch.

(b) One ceiling fan Point controlled by one-one way switch through Regulator.

( c) One bell/buzzer point controlled by bell push

(d) One three pin 5 Amp socket on same board with other switches.

(e) One three pin 5 Amp socket on independent board.

(f) One light point controlled by two 2-way switches

All as per item No.147 above but with 2.5 Sqmm. (nominal area) wire/cable for phase and neutral for one 3 Pin 15 amp socket on independent board including one 2.5 sqmm PVC insulated unsheathed multi stranded copper conductor cable, FRLS 1100 volts grade as earth continuity conductor up to common earth & connected to earth dolly complete all as specified and directed.

M&L for Point wiring with1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multi stranded copper conductor single core FRLS cable drawn through existing steel/PVC concealed conduit including pressed iron/steel suction box of thickness not less than 1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet/super hylam sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire up to common earth and connected to earth dolly complete including making good disturbed surfaces complete all as specified and directed of following. The make of wire/cable for internal shall be Havells/Finolex/L&T.(Note : Colour code shall be maintained as per IE rule)

(a) One light / Exhaust fan point controlled by one-one way switch.

(b) One ceiling fan Point controlled by one-one way switch through Regulator.

( c) One bell/buzzer point controlled by bell push

(d) One three pin 5 Amp socket on same board with other switches.

(e) One three pin 5 Amp socket on independent board.

(f) One light point controlled by two 2-way switches

All as per item No.149 above but with 2.5 Sqmm. (nominal area) wire/cable for phase and neutral for one 3 Pin 15 amp socket on independent board including one 2.5 sqmm PVC insulated unsheathed multi stranded copper conductor cable, FRLS 1100 volts grade as earth continuity conductor up to common earth & connected to earth dolly complete all as specified and directed.

S & F Switch piano flush type single pole one way 6 Amp complete all as specified and directed. Make : Havells/HPL/Anchor Penta

S & F Switch piano flush type single pole one way 15 Amp complete all as specified and directed. Make : Havells/HPL/Anchor Penta

S & F Socket outlet 3 pin, 5/6 Amps flush type multipurpose 5 pin complete all as specified and directed. Make : Havells/HPL/Anchor Penta

S & F socket outlet 2 in 1, 3 pin , 15/16 Amps flush type universal multipurpose complete all as specified and directed. Make : Havells/HPL/Anchor Penta

S & F bell push flush type 5 Amps ,SP complete all as specified and directed. Make: Havells/HPL/Anchor Penta

S & F Switch piano flush type single pole two way 6 Amp complete all as directed. Make : Havells/HPL/Anchor Penta

S & F calling bell ding dong type AC 230 Volt single pole complete all as specified and directed. Make : Havells/L&T Raaga/Anchor

S & F step type fan regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts complete all as specified and directed. Make HPL/Havells/Anchor

S & F ceiling rose, surfaces bakelite three terminals of size 65x25mm complete all as specified and directed. Make : Havells/L&T Raaga/Anchor/cabtree

S & F Lamp holder polycarbonate insulated body, with back plate with and incl LED lamp retrofit 3/5 watts complete. (for toilet or any other location) complete all as specified and directed. Make of lamp : Anchor/Crabtree/Ess Ess Kay/Plaza, make of LED Lamp : Phillps/Havells/Surya/syska

S & F Lamp holder polycarbonate insulated body, with back plate with and incl LED lamp retrofit 7 watts complete for kitchen or any other location complete all as specified and directed. Make of lamp : Anchor/Crabtree/Ess Ess Kay/Plaza, make of LED Lamp : Phillps/ Havells/Surya.

S&F in decorative wall light fixture made up of cast aluminium body polycarbonate diffuser, suitable for 15 Watts LED Lamp including one LED New Odore 10W E27 WW Ball Lamp Lumen output 1285 (lm) 3000K complete including taking out existing fitting any type and any position complete all as specified and directed. Make : Havells (City-1) cat part No LHDL02160099 (Fitting) LHLDERWEMD8X010(Lamp) or equivalent in Philips/Surya ROSHNI

Supply and fixing & replacement of LED mirror light fitting, 10 Watt, 1000 lumens 6500K, 2 feet long, comprises of aluminium extruded channel, frosted diffuser, integrated electronic driver, IP 20 protection and all accessories pre-wired including connecting up complete including taking out existing fitting any type and any position complete all as specified and directed. Make : Philips Cat BN 021 LED10S- 6500 PSU GR S1 or equivalent in Crompton,Wipro,Havells

Supply and fixing & replacement of 20 Watt 6500K , 4 feet long,LED batten 2000lumens fitting with extruded aluminium housing four feet with integrated LED & electronic driver and all accessories pre-wired including connecting up complete including taking out existing fitting any type and any position complete all as specified and directed. Make : Philips, Cat No BN 021C LED20S- 6500 PSU CW GR S2 or equivalent in Havells,Crompton, Wipro.

Supply and fixing & replacement of integrated LED bulk head luminary with opal diffuser with and including retrofit LED lamp 10 watt including taking down existing any type and any position complete including retrofit LED etc complete all as specified and directed. Make : Philips, Cat No : WT140W LED7S CW PSUS1PC, Crompton LBH-10-CDL, Bajaj BIBWP 10W LED

Supply & fix fans ceiling fan complete with blades, 230 V,1200 mm sweep, 65 watt including connecting with three core flexible copper conductor cable (23/0.0060) from ceiling rose complete including taking down old unserviceable ceiling fans and deposited to MES store yard complete all as specified and directed, White/Brown/ivory, BEE 5 star rated complete all as specified and directed.. make: Havells model SS-390/Crompton Model Mount Breeze deco/Orient model summer pride.

Supply & fixing Exhaust fans AC single phase 230/ 240 V of size 300 mm sweep, heavy duty, double ball 900 rpm,6 Pole power input 55 watt, totally enclosed rust proof body & blades, Aluminium pressure die cast, Dynamically balanced blade for vibration free & noiseless operation with louvers connecting with three core flexible PVC insulated multi stranded copper conductor of size 0.5 Sqmm from ceiling rose to connector of fan, MS brackets including civil work etc complete civil works including taking down old unserviceable exhaust fan and deposited to MES store yard complete all as specified and directed. Make: Havells model-turbo force/Crompton model No EXHD300-6-1(ISI)/Usha turbo DBB 300MM

M&L making suitable size hole in wall for fixing exhaust fan of size up to 300 mm sweep in any type of wall including grouting of 4 Nos hold fasteners /Tee bolts of suitable size etc for fixing of exhaust fan with wall complete all as specified and directed including making finishing surface of wall, distempering/white wash as per existing shade/colour complete all as specified & directed.

S & F, drawing sub main wiring with two single core PVC insulated FRLS cable with stranded copper conductor of nominal cross section area in & including PVC Conduit on surface or recessed of two runs of 4 Sq mm as current carrying conductor and one run of 2.5 Sq mm as earth conductor including making good disturbed surfaces with taking down old unserviceable Sub main wiring complete all as specified and directed.

All as per serial item No.169 above but in existing surface/recessed steel/ PVC conduit.

S & F, drawing sub main wiring with two single core PVC insulated FRLS cable with stranded copper conductor of nominal cross section area in & including PVC Conduit on surface or recessed of two runs of 6 Sq mm as current carrying conductor and one run of 4.0 Sq mm as earth conductor including making good disturbed surfaces with taking down old unserviceable Sub main wiring complete all as specified and directed.

Ditto as serial item no.171 above but in existing surface/recessed steel/ PVC conduit.

M&L for distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process including taking down old unserviceable distribution board. The DBs shall be of IP 43 protection. Note:-(i) DB and MCB shall be of same make(ii) MCBs shall be paid separately under relevant item, Make of DB : L&T,ABB, Legrand

M&L for Distribution board SPN 2 Way , single door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process including taking down old unserviceable distribution board. The DBs shall be of IP 43 protection complete all as specified and directed.. Note:-(i) DB and MCB shall be of same make,(ii) MCBs shall be paid separately under relevant item. Note:- DB and MCB shall be of same make, Make of DB : L&T, ABB, Legrand

S & F , MCB ,SP up to 32 Amps, B-Curve, 240 Volts, having braking capacity 10 KA complete all as specified and directed. Make: L&T,ABB,LEGRAND

S & F , MCB, SPN, 32 Amp, B-Curve, 240 Volts, having braking capacity 10 KA complete all as specified and directed. Make: L&T,ABB,LEGRAND

S & F , MCB, SP 40 Amp, B-Curve, 240 Volts, having braking capacity 10 KA complete all as specified and directed.. Make: L&T,ABB,LEGRAND

Supply and fixing of Bus bar chamber of size 325 x 600 x 214 mm or higher size with PVC hinged lid suitable for and mounting arrangement for fixing of MCCB 4 pole, up to 100 Amps duly connected with and including 04 Nos of copper Bus bar 300 Amps fixed on epoxy insulators, making holes on bus bar at least 8 Nos on each bus bar, Gun metal cable gland of 25 Sqmm 01 No and PVC coupler 04 Nos complete Polycarbonate type (shock proof, rust free, corrosion free, acid and chemical resistant, fire retardant, having high impact, made of halogen and silica free recyclable material), UV resistant, having high grade gasket made of Polyurethane, flame retardant, including mounting arrangement with GI strip 25 x 3mm on pole, connection of cables at least five Nos complete all as specified and directed. Note:- Only MCCB shall be measured and paid separately all other items including connection from MCCB to bus bar with suitable size copper wire including thimble, bottle lugs etc are included in item rate quoted. Make:- Hensel Mi 9410 /ABB/Schneider

M&L for Distribution board Vertical type TPN 4 Way double door, suitable for MCCB 100/125 Amps MCCB as incoming and MCBs for outgoing factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection including taking down old unserviceable distribution board. Note:- DB and MCCB/MCB shall be of same make and paid separately. Make:- Legrand/ Hager/ L&T /C&S

S&F in replacement of MCCB 100 Amps four pole 415 volts thermal magnetic release ICU=100% ICS having breaking capacity 16 KA including connection terminal strip complete all as specified & directed. Make:Legrand/ L&T/ C&S

S&F Meter Distribution board made out of Thermoplastic polycarbonate of size 600x600x170 mm (dust proof & weather proof ,Shock proof, rust proof ,corrosion free ,acid & Chemical resistance ,UV resistance , Halogen free & free recyclable material) with 230v Ac 50 HZ 3 Wire , Gasket shall be embedded with T-locking arrangement and suitable for mounting of Electronic Meter -04/06 Nos including electrical connection with existing system and sealing properly & taking out u/s broken/rusted box of any size and type complete all as specified and directed. Make Hensel cat part no Mi0800 / Secure/Sintex

M&L Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with a 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm. dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe medium 15 mm. bore, and water pipe 20 mm. bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 & 75 mm thick RCC (1:2:4) type B1 cover slab reinforced with 8mm TMT bars 100mm c/c both ways complete all as specified & shown in elect plate No. 3 of SSR part I of 2009 and testing on completion complete all as specified and directed.Note: (i) If the desired earth resistance is not found within permissible limit shall be redone by contractor at no extra cost.(ii) Cost of GI wire 4 sqmm and 15 mm dia pipe medium grade up to 7.5 mtr is included in the rate quoted for this item

Dismantling the ceiling fan and Re fixing the same as per existing one with suitable fixing arrangement after necessary servicing with replacement of unserviceable minor spare parts if required, painting complete all as specified and directed.

Dismantling the exhaust fan and Re fixing the same as per existing one with suitable fixing arrangement after necessary servicing with replacement of unserviceable minor spare parts if required, painting complete all as specified and directed.

Dismantling the Water storage Geyser 25/50 Ltr and Re fixing the same as per existing one with suitable fixing arrangement after necessary servicing with replacement of unserviceable minor spare parts if required, painting complete all as specified and directed.

Dismantling existing electric meter complete including connection and re fixing the same or new location as per existing one including connection complete all as specified and directed.

Supply and fixing wall mounted type sheet metal single pole and neutral enclosure with a two pin and earth plug and socket complete with and including MCB SPN 20 Amp 'B' series 10 KA mounted on DIN rail channel and suitable plug complete all as specified and directed. Make: Legrand Cat No 5078 14 or equivalent in L&T /Simens/ Schneider. (Note : Item rate including all items ie base box, plug, socket , MCB etc complete)

S&F Temper proof LCD display Digital Energy Meter, single phase, 2 Wire, AC, 230V, Cap 10-60A, Push to fixed type Box complete all as specified and directed. Make : Secure, L&T, HPL

Supply & Fixing building security light luminaries with surge protector and Photovallic/LDR sensor controlled made out of single die cast alluminium housing suitable for and including 1x35 watt LED type complete, prewired complete including 40/32 dia GI Light grade for bracket of fitting as required up to 1.2 RM proper shaped , bended (120 degree) threaded & drilling holes for wire entry & MS clamps made out of flat iron of suitable size including painting complete all as specified and directed. Make : Wipro cat pt no LR 13-501-XX-57-XX/ Greenstar/Phillips

M/s Arihant Builders

RAMAPATI ENGINEERING SERVICES

Kum Kum construction co.

M/s Pioneer Construction Co.

R K TYAGIS

Ms Banco Builders

Arun Construction Co.