Medak Works

Amount

SH: 1 Earthing Earthing with GI earth plate 600mm x 600mm x 6mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal or coke and salt complete as required.

Providing and fixing 25mm x 5mm G.I. strip in 40mm dia G.I. pipe from earth electrode including connections with GI nut bolt spring washer excavation and refilling etc., as required.

Providing and fixing 25mm x 5mm GI strip on surface or in recess for connections etc. as required.

P/F of 40mm dia 2mm thick PVC pipe on surface of wall/in floor with necessary clamps, screws etc., as required.

Providing and fixing 2 Nos. GI earth bus-bar made of size 300mm x 25mm x 5mm thick with suitable holes made to connect the bus bar ,the bus bars should be mounted on suitable size porcelain insulators, including making good the damages etc. as required.

SH-II: EI & SERVICE CONNECTION Supplying and fixing following way, vertical type Three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including Earthing etc., complete as required. (But without MCB/RCCB/Isolator) a) 8 Way TPN vertical type MCB DB, double door

Supplying and fixing 5A to 32A rating, 240/415V, 10kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required. a) 5-32A SP MCB

b) 40A TP MCB

c) 63A TP MCB

Supply and fixing of 100 A, 3 Pole MCCB with 30 kA Breaking Capacity in existing vertical MCB DB, providing earth connections etc as required

Supply and fixing of 63 Amps 4 Pole On Load Change Over Switch along with MS enlosure i/c fixing on wall, providing earth connections etc as required

Supply and Laying of 3.5 Core x 25 sqmm Aluminum Armoured UG cable from Transformer to LT Meter, and new COS at DG room including laying in HDPE pipe, on wall /surface, clamping etc as required

Supply and Laying of 3.5 Core x 25 sqmm Aluminum Armoured UG cable from Transformer to LT Meter, and new COS at DG room including laying in soft soil by diggig, providing bricks and refilling etc as required

Dismantling and removing of MV Panel/ capacitor panel/ power room panel/ LT panel and Wallmounting panels, cables and earthings, including removing of panel joints 4.2 mtr panel, shifting to out side of room, cables coiling and shifting to out side as required

Supplying and fixing of 16 G MS meter board out door type of suitable size to accomodate fuses along with 3 no's 63 Amps fuse cut-outs, including 40A neutral link, locking arrangement, grouting with bolt nuts, cutting , welding, painting, sign writing etc., complete as required.

SHAKTI POWER LINES (BID ID -790981)