Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.0 Cr
EMD Value
₹1.0 L
Closing Date
17 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer Panchayat R&B Division Bharuch
(Package No. 94) Resurfacing and Strengthening of Uchhad Approach Road Ch. 0/0 to 1/70 Ta. Jambusar Dist. Bharuch under MMGSY-2025-26 (Normal)
358996
14/2026-27
Open
Civil - All
Fixed-rate
Bharuch
5 documents required · 5 mandatory
₹3,600
Executive Engineer Panchayat R&B Division Bharuch
₹1.0 L
2 Nov 2026
2 Nov 2026
2 Nov 2026
17 Nov 2026
2 Nov 2026
90 days
No. figures Amount
1 Clearing and grubbing road land including uprooting wild 0.34 Hect. 28393.04
vegetation grass bushes, shrubs, sapling and trees of girth up to
300mm removal of stumps of trees cut earlier and disposal of
unserviceable materials and stacking of serviceable materials as
per Clause-201 (area of light density) by mechanical means in
area of light jungle.
2 Earthwork in cutting in all sorts of soil and soft murrum including 402.00 Cum 127.75
conveying and spreading the stuff, embankment as and where
directed within 200 meters from the end of cutting with all
required lead and lift.
3 Scarifying gravelled macadam or bitumen macadam surface 6 2805.00 Sq.m. 39.63
cm to 10 cm. depth including stacking useful materials on road
side and disposing off remaining stuff.
4 Providing & laying compacted layer of WBM of Grading-I MCBT 702.00 Cum 1838.20
metal of size 63mm to 45mm in required layers including using
16% stone screening, 13.2mm size and 8% stone dust as filler
including spreading, watering and consolidation by vibratory roller
as per MORTH specification etc. complete as directed by
engineer in charge.
5 Providing & laying compacted WBM Grading-II using MCBT 702.00 Cum 1877.59
metal of size 53mm to 22.4mm in required layers including using
24% stone screening, 11.2mm size and 8% stone dust as filler
including spreading, watering and consolidation by vibratory roller
as per MORTH specification etc complete as directed by
engineer in charge.
6 Earthwork for embankment including breaking clods, dressing 1069.00 Cum 183.70
with all lead and lift including rolling with power roller, watering
and consolidation from borrow pits within land width.
7 Providing and laying quarry spaull of approved quality including 204.00 Cum 1186.75
spreading, watering, consolidation with vibratory roller as per
MORTH specification including loading and unloading etc.
8 Providing & laying Bituminous grout 37.50 mm thick with asphalt 702.00 M.T. 3540.05
of grade of VG-30 at the rate of 1.99% by weight of mix for mixing
& 4.00 Kg/10 Sqm for tack coat of mix for mixing using B.T. chips
of required gradation including cleaning and heating asphalt
premix materials by hot mix process in proper gradation and
laying with paver finisher and consolidation by roller of 8 to
tonnes including cost of all materials, asphalt, aggregates, labour
charges, royalty charges etc. completed as directed including
flushing key aggregate @0.13 Cum/10 Sq.m.
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
9 Providing, laying and rolling 25 mm thick open graded premixed 491.00 M.T. 4557.12
bituminous carpet with B.T. aggregate as specified and using
bitumen for mixing with aggregate at the rate of 3.36% i.e.
kg/M.T. of total mix including heating and mixing in drum mix
plant and spreading the same with paver finisher and
consolidation with power roller including necessary firewood, oil,
lubricants, labour charges etc. using contractor's own drum mix
plant and equipment, tool etc. completed in accordance with the
requirement of specification including providing & laying uniformly
tack coat (2.50 Kg./10 Sq.m)
10 Providing and laying seal coat with B.T. aggregate as specified 252.00 M.T. 4853.05
using aggregate at the rate of 0.18 cum/10 Sqmt and bitumen
grade (VG-30) for mixing with aggregate at the rate of 4.50% i.e.
45.00 kg/M.T. of total mix including heating and mixing in drum
mix pant, spreading the same with paver finisher and
consolidation with vibratory roller including necessary firewood,
oil, lubricants, labour charges etc. using contractor's own drum
mix plant and equipment, tools etc. complete in accordance with
the requirement of specification.
11 Providing and fixing ordinary kilometer stone of approved hard 2.00 No. 704.34
stone as per IRC type design and fixing in C.C 1:4:8 including
lettering and paints etc. complete. (For ODR, V.R.)
12 Providing and fixing Hectometer stone as per I.R.C. type design 8.00 No. 356.50
including painting, lettering etc.complete (i) Fixing in C.C. 1:5:10
13 Providing and fixing Guard stone as per I.R.C. type design 113.00 No. 349.11
including white washing etc. complete (i) Fixing in C.C. 1:5:10
14 Village name / Bump Ahead sign : Providing and fixing sign 6.00 No. 5045.37
boards made out of 2 mm alluminium sheet size 90 x 60 cms
rectangle as per the design of IRC-67-1977 pre treated with
phospheting process and acid etching coated with one coat of
epoxy primer and two coats of best quality epoxy paint
reflectonsed with retro reflective sheeting as per latest
M.O.R.T.H. specifications. Letters and numerals should be as per
IRC-30-1968, 3.1m long (2 Nos) stand post and frame fabricated
from suitable size iron angle of 50 x 50 x 5 mm painted with best
quality epoxy coating in black and white bends. The details of
symbol or inscription / numerals for each board shall be as per
the instruction of engineer in charge. The fixing at site shall be in
1:2:4 C.C. block of size 45 x 45 x 60 cms for each leg including
excavation, curing etc. complete under the supervision of
engineer- in-charge (A) Engineer Grade (VR).
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
15 Direction sign (Junction board) :- Providing and fixing sign boards 2.00 No. 14831.71
made out of 2mm aluminium sheet size 244 x 122cms. rectangle
as per the design of IRC-67-1977 pre treated with phospheting
process & acid etching coated with one coat of epoxy primer and
two coats of best quality epoxy paint reflectorised with retro
reflective sheeting as per latest M.O.S.T. specifications, Letters
and numerals should be as per IRC-30-1968, 3.1m long (2 Nos.)
stand post and frame fabricated from suitable size iron angle of
50 x 50 x 5mm, 75 x 75 x 6mm as required, painted with best
quality epoxy coatings in black and white bends. The details of
symbol or inscription / numerals for each board shall be as per
the instruction of engineer in charge. The fixing at site shall be in
1:2:4 CC block of size 45 x 45 x 60cms. for each leg including
excavation curing etc. complete under the supervision of
engineer in charge. (A) Engineer grade. (VR)
16 Citizen's Information Board : Providing and fixing of typical 1.00 No. 23062.34
information board as per instruction. Two M.S. plate of 1.6mm
thick of 900mm x 750mm size fixed at top and bottom duly
welded with M.S. angle with angles of 25 x 25 x 5mm thick M.S.
plate shall be welded by two vertical M.S. flat and four horizontal
M.S. flats 5mm thick to 75mm x 75mm of 12 SWG square tube
posts duly embedded in cement concrete M-15 grade C.C.
blocks of 600 mm x 600mm x 750mm below ground level.
Painting new letters and figures of any shade with ready mixed
synthetic enamel paint of superior quality in required shade and
coloured, all sections of frame joints and steel tube will be
painted with primer and two coats of epoxy paint as per drawing
clause 1701 & Annexure 1700.1 (10.16).
17 Road marking with hot applied thermoplast compound with 340.00 Sq.m. 367.73
reflectorising glass beads on bituminous surface and laying of hot
applied thermoplastic compound 2.5mm thick including
reflectorising glass beads @250 gms/sqmt area, thickness of
surface applied glass beads as per IRC 35. The finish surface to
be level uniform free from streaks and holes.
18 Supply & fixing logo board of MMGSY diamond size (600mm x 1.00 No. 4129.89
600mm) 16 gauge & board plate size (900mm x 250mm)
gauge thick M.S plate and 2.40 mt. deep length single angle 75 x
75 x 6 mm size including fitting and painting lettering with
luminous color as per drawing etc. complete.
19 Informatory Warning Sign :- Providing & fixing sign boards made 2.00 No. 3856.90
out of 2mm aluminium sheet size 80 x 60 cms as per design of
IRC 67-1977. Pre treated with phospheting process and acid
etching coated with one coat of epoxy primer and two coats of
best quality epoxy paint, reflectorized with retro reflective
sheeting as per the latest M.O.R.T.H. specification, 3.1 mt. long
stand post and frame fabricated from suitable size iron angle of
35 x 35 x 3 mm, 75 x 75 x 6 mm; painted with best quality epoxy
coating in black and white bends. The details of symbol for each
board shall be as per the instruction of engineer in charge. The
fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 cms
for each leg, including excavation curing etc. complete under the
supervision of Engineer-in-charge. (A) Engineer grade (VR).
It. Rate in Total
Description of Item Qty. Unit
No. figures Amount
20 Excavation for foundation up to 1.50 mt. depth including sorting 174.00 Cum 117.08
out and stacking of useful material and disposing off the
excavated stuff within all lead and lift for all sorts of soil.
21 Providing and laying in foundation with ordinary cement concrete 18.00 Cum 3105.12
M-100 mix and providing necessary vertical pin headers including
formwork, vibrating, ramming and curing complete.
22 Providing and casting in situ ordinary cement concrete M-150 mix 192.00 Cum 3678.42
and providing necessary pin headers including shuttering,
scaffolding, laying, vibrating, curing and finishing complete
without V-groove (A) height 0.0 to 5.0 mt.
23 Providing and fixing I.S.I. mark T.M.T. Bar Fe-500D 600.00 Kg. 76.22
reinforcement for R.C.C. work including binding, bending and
placing in position complete upto floor two level.
24 Filling available excavated earth (excluding rock) in trenches, 87.00 Cum 130.40
plinth, sides of foundation etc. in layer not exceeding 20 cm in
depth consolidating each deposited layer by ramming and
watering etc. complete.
25 Providing and laying weep hole in abutment and returns by using 72.00 No. 82.57
A.C. pipes of 100 mm dia. with laying in proper grade and jointing
the completed as per detailed specification.
TOTAL Rs.
i.e. Rs. One Crore Two lacs Seventy Three thousand Eight hundred Eighty and Thirty Two paisa only.
I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written
in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
Net Rs. ___________________________ Total Rs. ________________________
In words ____________________ In words ____________________
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the
Engineer-In-Charge for which no extra payment shall be made.
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills.
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-
10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where
there is a change as per actual mix design the cost of difference of cement consumption have been
deducted from the rate of original item at the rate of input rate mentioned in all the tender.
Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me
and found order.
Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer
Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,
Jambusar Bharuch Bharuch
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
GRs (1).pdf
General Techical Specifications.pdf
Specification Index.pdf
Drawings.pdf
BOQ_MMGSY_2026-27_PACK_94_UCHHAD AP RD.pdf
SBD_MMGSY_2026-27_PACK_94_UCHHAD AP RD.pdf
NIT_MMGSY_2026-27_PACK_94_UCHHAD AP RD.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .