Renovation and Repairing office of the State Tax Commissioner at Junagadh

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and Fixing Low Height Decorative Composite partition of wooden, gap as per

drawing or as directed by engineer-in-Charge, Using 8 mm thick ISI marked Ply on both

side fixed on a teakwood framing grid of teakwood member Size 65 mm x 38 mm at

mm C/C on Vertical side and on horizontal side as per design or as directed by Engineer -

in - Charge. Wooden portion consists of both side 12 mm thick ply with 1 mm thick vinyl

wooden lamination sheet on outer side of ply Colour & Design of Lamination is as per

Drawing or as directed by Engineer-in- Charge. Glass portion consist of 5 mm thick

toughened glass with wooden framing. The Portion also includes door When necessary

as per drawing by using 8mm ply on both side with 1 mm thick lamination including

frame of 25mmx75mm included, beading on outer side, good quality door closer, godrej

lock, SS hinges etc. Rates includes all Labour, Material, Screw, Khilli, Fevicol, PU finish on

outer side of ply including all taxes Etc. complete. All Material to be used as approved by

Engineer-in-Charge

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and Fixing Full Hieght Decorative Composite partiton of wooden, glass and gap

as per drawing or as directed by engineer-in-Charge, Using 8 mm thick ISI marked Ply on

both side fixed on a teakwood framing grid of teakwood member Size 65 mm x 38 mm

at 600 mm C/C on Vertical side and on horizontal side as per design or as directed by

Engineer -in - Charge. Wooden portion consists of both side 12 mm thick ply with 1 mm

thick vinyl wooden lamination sheet on outer side of ply Colour & Design of Lamination

is as per Drawing or as directed by Engineer-in- Charge. Glass portion consist of 5 mm

thick toughned glass with wooden framing. The Partion also includes door When

necessary as per drawing by using 8mm ply on both side with 1 mm thick lamination

including frame of 25mmx75mm included,beading on outer side, good quality door

closer, godrej lock, SS hinges etc. Rates includes all Labour, Material, Screw, Khilli,

Fevicol, PU finish on outer side of ply including all taxes Etc. complete. All Material to be

used as approved by Engineer-in-Charge

Providing and fixing of Sliding glass door without door frame. The Door with 12mm

Clear Toughend Glass with slim profile frame in periphery of Glass with film on glass or

as permentioned in design. Door with Necessary Hardwares required like Top Bottom

Patch fittings with top Sliding Chenal, Pull Handle & Floor Chenal. Door with designer

film to maintain the privecy. Film with necessary Groove or design cutting if required by

3 Architect.All materials like Aluminum Profiles, Hardwares and accessories should have to 2.10 11873.56 Sqm

be from approved makelist and with approval from consulting Architect & Engineer-in-

charge.The work shall be done as per the approved shop drawings specifications,

sample approved and as directed by the Architect and Engineer-in-charge

L- Shape Table with drawar unit - size : 1200 X 600 X 750 mm

Providing And Arranging table top made of 36mm thick MR grade plywood with nail

curvica Laminate finish.Leg & frame to be made from 50 x 50 x 1.6mm size & 50mm x

25mm x 1.8mm size CRC Square pipe powder coated 50 micron finish with levlar Appron

18 mm thick MR grade plywood with Laminate finish.Drawer Unit-900 x 450 x 750 mm

made of All Structure 18 mm thick MR grade plywood with Laminate finish. Drawer run

on telescopic channel with lock inside 0.8mm thick laminate of approved shade. Side

Table of size1200mm x 600mmx 750mm : side table top made of 36mm thick MR grade

plywood with nail curvica Laminate finish. side & shutter made of 18 mm thick MR

grade plywood with Laminate finish Including all materials and labour etc.Complete as

per drawing and instruction of engineer-in charge.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Table -1 - size : 1200 X 500 X 750 mm

Providing And Arranging table top made of 36mm thick MR grade plywood with nail

curvica Laminate finish.Leg & frame to be made from 50 x 50 x 1.6mm size & 50mm x

25mm x 1.8mm size CRC Square pipe powder coated 50 micron finish with levlar Appron

18 mm thick MR grade plywood with Laminate finish. Table of size1200mm x 500mmx

750mm : side table top made of 36mm thick MR grade plywood with nail curvica

Laminate finish. side & shutter made of 18 mm thick MR grade plywood with Laminate

finish Including all materials and labour etc.Complete as per drawing and instruction of

engineer-in charge.

Table -2 - size : 1060 X 500 X 750 mm

Providing And Arranging table top made of 36mm thick MR grade plywood with nail

curvica Laminate finish.Leg & frame to be made from 50 x 50 x 1.6mm size & 50mm x

25mm x 1.8mm size CRC Square pipe powder coated 50 micron finish with levlar Appron

18 mm thick MR grade plywood with Laminate finish. Table of size1060mm x 600mmx

750mm : side table top made of 36mm thick MR grade plywood with nail curvica

Laminate finish. side & shutter made of 18 mm thick MR grade plywood with Laminate

finish Including all materials and labour etc.Complete as per drawing and instruction of

engineer-in charge.

Table -2 - size : 1600 X 600 X 750 mm

Providing And Arranging table top made of 36 mm thick MR grade plywood with nail

curvica Laminate finish.Leg & frame to be made from 50 x 50 x 1.6mm size & 50mm x

25mm x 1.8mm size CRC Square pipe powder coated 50 micron finish with levlar Appron

18 mm thick MR grade plywood with Laminate finish. Table of size1600mm x 600mmx

750mm : side table top made of 36mm thick MR grade plywood with nail curvica

Laminate finish. side & shutter made of 18 mm thick MR grade plywood with Laminate

finish Including all materials and labour etc.Complete as per drawing and instruction of

engineer-in charge.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

TABLE TYPE-01 (Custom Made Commissinor Main Table) : Providing and fixing table unit

consist main table with side storage ,back storage with pedestal unit with allnecessary

accessories keyboard, CPU stand ,cable manager, modesty panel etc with all required

necessary accessories.

Main Table top : 2000(L) x 1050(W) x 750 (H)mm

Side table - 1050 (L)x 600(W) x 750 (H)mm

side table unit -510 mm Dia (half Round as per DWG)

1. Main Table Top: 50 MM th top Made from beveled edge finish 4 mm th coloured glass

Saint gobain /eqvivalant approved make and shade/ veneer + 19 MM th IS-710 ply +

mm th IS-710 ply+4 mm th veneer finish with semi gloss PU polish.

2.Main table front : As per detail drawing and reference image made form 19 mm th IS-

710 ply with rwith veneer finish

3.Verticle support: As per detail drawing and reference image made form 61 mm th

8 verticle support 4 mm th Veneer gurjan base ply + 19 MM th IS-710 ply +35x35 x 2.6 mm 1.00 76659.00 Nos

thick metal box of tata or equivalent+ 19 mm th IS-710 ply+ 4 mm th Veneer gurjan base

ply with require edge finish teak wood/SS as per architect suggestion. Side storage:

Storage body is made of 19mm IS-710 ply with veneer finish and inner side 1.5 mm thick

laminate finish including require nos of drawer and shutter all type of fittings , fixtures,

hardware Hettich/Haffle make etc complete .SS 304 grade conceal handle shall be

8.Pedestal unit(500x500X545):Pedestal bodys made of 19mm IS-710 ply with veneer

finish and inner side 1.5 mm thick laminate finish including require nos of drawer with

all type of fittings , fixtures, hardware Hettich/Haffle make etc complete .SS 304 grade

instruction of Architect/EIC.

4.Wire management: one way or two way open able flip top box mounted on table top

squeeze :A special flexible rubber component that allows easy and safe passage of wires.

High Back pad:

ChairMade from approved

for Commisnor leather finish with require accessories

Providing and Arranging High Back Chair having Seat & back cushioned on ply, aluminum

die casted arms with cushioned pad, synchro mechanism with single back lock, gas lift,

9 chrome base.Including all materials and labour etc.Complete as per drawing and 1.00 20584.81 Nos

instruction of engineer-in charge. Size : max.1290 mm ,Min. 1180 mm,Seat : 510mm x

530mm , Back : 790mm x 540mm

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

High Back Chair

Providing and Arranging High Back Chair having Seat & back cushioned on ply, aluminum

die casted arms with cushioned pad, synchro mechanism with single back lock, gas lift,

10 chrome base.Including all materials and labour etc.Complete as per drawing and 8.00 13674.39 Nos

instruction of engineer-in charge. Size : max.1290 mm ,Min. 1180 mm,Seat : 510mm x

530mm , Back : 790mm x 540mm

Medium Back Chair

Providind and Arranging Medium Back Chair - Seat & back cushioned on ply, aluminum

die casted arms with cushioned pad, Synchro mechanism with single back lock , gas lift

11 chrome base.Including all materials and labour etc.complete as per detail drawing and 40.00 10366.64 Nos

instruction of engineer-in charge.Size : max.Height 1070mm, Min.970mm,Seat: 490mm

x 510 mm,Back : 640 mm x 510 mm

Low Back Chair :

Providing and Arranging Cushioned Seat & back, PP outer back cover, PP arms, Single

back lock, Push back mechanism, gas lift for seat height adjustment, five prong Nylon

12 base with twin wheel nylon castor.Including all materials and labour etc.Complete as per 8.00 6318.56 Nos

drawing and instruction of engineer-in charge.Size : Max.Hight 1020mm Min.Height

mm, Seat : 500mm x 460mm , Back: 500mm x 440 mm

(2 Seater sofa - Custom Made Sofa) : 1500mm (L) x 750 mm (B) x 750 mm (H), The seat

shall 150 mm th 40 density & back shall be 32 density foam & finished in Approved

fabric upholstery as per the drawing/image and instruction from Architect/EIC all

external & internal exposed woodwork to be finished in PU semi gloss finish polish. .The

work shall be done as per the approved shop drawing (to be prepared by contractor),

specifications, sample approved and as directed by the Architect and Engineer-in-

charge. The rate shall be for complete item inclusive of all material, labour, wastages,

necessary tools & tackles,approved make for all floors, all heights, all levels and all

places within campus. Contractor shall do all the needful and shall fulfill Architect's

design intent. No additional claims will be entertained for this. Rate shall inclusive of

shop drawing ,mock up sample, all materials, loading, unloading, all taxes,

transportation, placing at all floors and for all leads,all accessories as described in item

description.As approval of architect.

(2 Seater sofa - Custom Made Sofa) :1500mm (L) x 750 mm (B) x 750 mm (H)

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and Arranging corner table made from 37mm x 37 mm Indian teakwood leg

and top frame made from 37mmx 75mm Indian teakwood having 18 mm thick Ply and

4mm thick Veneer with melamine polish and 0.8mm thick balancing laminate at bottom

for shelf made with surrounding Indian teakwood frame of size 37 mm x 12 mm the top

14 having 12 mm thick glass with edge finish to be placed properly in groove made. Surface 1.00 3192.65 Nos

to be finished with melamine polish Including all materials and labours etc. complete as

per drawing and instruction of engineer-in charge.

Corner Table : size - 600mm x 450mm x 450mm

Providing and Arranging Center table made from 37mm x 37 mm Indian teakwood leg

and top frame made from 37mmx 75mm Indian teakwood having 18 mm thick Ply and

4mm thick Veneer with melamine polish and 0.8mm thick balancing laminate at bottom

for shelf made with surrounding Indian teakwood frame of size 37 mm x 12 mm. The top

15 having 12 mm thick glass with edge finish to be placed properly in groove made. Surface 1.00 4433.90 Nos

to be finished with melamine polish including all materials and labours etc. complete as

per drawing and instruction of engineer-in charge.

Center Table : size - 900mm x 600mm x 450mm

Supplying ,Fixing and commissioning of TV Cabinet Providing and fixing at site TV Cabinet

of approved design & Drawings to be made up of 18.0mm BWP Ply, and finished with

16 approved shade of Laminated finish, including all accessories, space for fixing of TV, 4.20 9999.00 Sqm

Necessary shelves, all accessories etc complete

Providing & fixing Wooden cupboard size of 0.90 x 2.10 mt and depth 0.60 mt using

12mm thick plywood all proof, on back side both side top bottom and shelves are of

mm thick ply & shutters are of 12mm thick ply all proof with teakwood batten & 1 mm

lamination in single or double shade & colour as directed on all visible face and 1.00 mm

lamination on all non visible faces including SS fixtures & fastening, Godrej lock etc. good

quality as directed by engineer-in-charge etc. complete.

Wooden Cupboard : size - 900mm x 210mm x 600mm

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Over hed File Storage Unit :- Size Custom Length and Depth 600mm Providing and

Arranging Overhaed Unit with top 18mm overall thickness made from 18 mm thick MR

grade plywood with 1.00 mm thick Laminate finished polish. Side made of 18mm thick

MR grade plywood with 1.00 mm thick Laminate finish and inside 0.8mm thick

balancinglaminate of approved shade. Godrej make lock with Two keys and shutter fixed

18 with auto hinges including . all necessary fixtures and fastening as approved and back of 10.10 9466.73 Sqm

the unit with 6mm thick MR grade playwood with 0.1 mm thick laminate of approved

shade with nylon bullet including all materials and labour etc. Complete as per drawing

and instruction of Engineer-in charge

Over hed File Storage Unit : size - Depth 600mm

FlutedWall PANELING With Polish/PU Finish: Providing & fixing with Sheet metal

screws/Nylon grip screws of Corro-shield /Fischer and shall be supported by filling

required size wedges /washers/ MS wall connectors or packings of teak wood /MS

19 washers to ensure right angles and plumb level. Fluted panel,adhesive ,tape, headless 14.40 4124.84 Sqm

nails etc ,finished with Polish/PU paint & in pattern as shown in the drawing. Rate shall

be inclusiveg grooves etc complete as per drawing or as directed by EIC/ Architect.

Providing and fixing of planter/pots of frp or plastic with artificial indoor plants as per

Providing and Fixing Blackout Roller Blinds with fabric of 0.53mm thickness and Top

channel of non-rusting aluminium alloy with 1.25mm thickness and bottom channel of

1.50mm thickness & 21mm diameter. Tilt channel of ABS plastic with 1.50mm polyster

21 cord with 4.50mm balls with stop lock arrangement including all necessary fixture, 55.20 1283.71 Sqm

fastners, fittings, labour material machinary etc complete as seletced and diretced by

Engineer Incharge.

Roller Blinds

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and Fixing fiber acoustic false ceiling of size 595 x 595 x 20mm thick is made

fine micro glass fibre as per the below mentioned specifications. Colour: Plain White,

Black, Core: Soft fiber, suspended celling system which includes silhout main-T of size

38x15x0.35mm at every 1200 c/c and cross T of size 38x15x0.35mm are fixed to Main T

at 1200/600 mm c/c. Wall angle of size 22x22x0.40mm then fixed along the perimeter of

wall with the suitable fasteners. The suspension is done with all accessories like Soffit

22 cleat, levelling clips & wire rods as per dwgs. T-Grid System. Characteristics: 0.9 NRC 35.00 2624.99 Sqm

broadband sound absorption, highest for modeular ceilings. White surface finish with

fine monoilthic texture for high light reflectance, less lighting requirements. Black

surface for full light absorption. At 1.5-3kgs/m2, does not contribute significantly to

structural load of building including all accessories, material & labor complete as

directed by Architect / Enginee

White stone bella masonary work in partition walls up to 15cm thickness in Cement

23 Mortar 1:4(1-cement:4-course sand). 17.00 684.48 Sqm

Providing 15mm thick Mala cement plaster in single coat on smooth finished

(Similar)side of single or half masonary walls for interior plastering upto floor two level

and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) incl.

finishing with a floating coat of neat cement slurry etc.

Providing and fixing 35 mm thick Flush Door Shutter using anodized aluminum section

frame equivalent to jindal door section no 19552 - weight not less than 1.1 kg / mt. with

wooden inserts for durable grip of door hinges. (frame size 38mmx 63.5 mm.), Shutters

25 with both size Decorative 1 mm thick Laminated, pattern and design is to be approved 2.00 5095.45 Sqm

by the Architect, with Stainless Steel handle size 30 Cm Long, Tower Bolt size 15cm, &

Heavy Stainless steel Aldrop as per detailed drawing / as directed.

Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP depress panel

shutter having extra reinforcement on sides & edges in Gel coat finish. The core of the

shutter & frame is to be filed up with injected fire retardant grade polyurethene foam

done in situ alongwith embedded wooden pieces for stiffening & also taking hinges &

fintures. The whole FRP frame & shutter is to be water proof weather proof, termite

proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with

necessary screws & alluminium fixtures & fastenings & fastener sleeve.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm /

mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick cement

plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry.

Providing and laying Mirror polished Machine polished Granite Stone slab 18 mm

(Average) thick for Doors / Windows sill & Jams Cladding as per design incl. Half round

moulded both edges fixed on 12 mm thick cement plaster 1:3 (1 -cement : 3 coarse sand

) jointed with grey cement slurry including rubbing and polishing etc. complete with

necessary G.I. Fasteners for Long side in top. Colour and Finish as directed

Providing and fixing Wash basin Platform of 19 mm thick Black toughened Glass

including making hole in glass and fixing with necessary stainless steel accessories etc.

complete as directed by engineer in charge / as per detailed drawing.

Providng and applying two coats of acrylic lappy (putty) and two coats of primer & Wall

painting ( two coats) with plastic emulsion paint of approved brand and manufacture on

30 wall surfaces to give an even brushing the surface free from mortar droppings and other 26.00 123.44 Sqm

foreign matter and sand papered smooth

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings make as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings make as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent

as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of

34 clamp at every two metre C/C or shall be concelled as directed including necessary 5.00 195.66 Rmt

fittings etc. including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials

Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia.

Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia.

Providing and fixing to wall ceiling floor 10.0 Kg. F/Cm2 working pressure polythene

pipes approved brand for soil waste and ventilating pipes of the following outside dia.

low density, complete with necessary fittings ,wall clamps etc including making good the

wall ceiling and floor. (E) 50 mm

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe

line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on

38 wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh 30.00 876.90 Rmt

at every 2000 mm center to center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all materials.

Providing and fixing Bib Cock or bath spout Approved Make or Model with including All

accessory Complete As Directed By EIC

Providing and fixing Pillar Cock Cock or bath spout Approved Make or Model with

including All accessory Complete As Directed By EIC

Providing and fixing Towel SS 304 Rack 600 mm (24”) Make or Model with including All

accessory Complete As Directed By EIC

Providing and fixing Art Street Frameless Wall Mirrors for Bathroom, Bevelled Frameless

42 Wall Mirror (700 x 500 mm, Silver) 5 mm thick glass mirror with double coat and 1.00 2699.73 Each

longevity,grounded edges and silver plating on etc complete.

Providing and fixing Concealed stop cock with adjustable wall flange Approved Make or

43 Model with including All accessory Complete As Directed By EIC 2.00 1755.38 Each

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and fixing Table Top wash basin of approved make with bottle trap with union

and wall discharge pipe with flanges and cap of approved make, 32mm dia GI waste pipe

44 with fittings up to floor trap, 32mm dia waste coupline with CP chain and rubber plug, 1.00 11841.24 Each

15mm dia consealed stop valve of approved make 15mm heavily quality flexible PVC

Providing and fixing Wall Mounted Water Closet with integral "P" and "S" trap including

jointing the trap with soil pipe in cement mortar 1:1 (1-cement, 1-sand) of approved

brand including seat cover for wash down WC with CP brass hinges and rubber buffers

including providing 12.50 Litres low level flushing cisten with a "P" pair of CI or MS

bracket with complete fitting such as lead valve Sipron 15mm dia brass ball valve with

polythene floa

Providing and fixing C.P. Brass health faucet with rubbit cleaning system 1.00 mt. long

46 P.V.C. Flexible tubes and ABS wall hook with angular stop cock with extension nipple 1.00 2137.16 Each

62mmlong etc. complete.

Providing and fixing S.W. Gully trap with C.I. Grating brick masonary chamber and

water tight C.I. Cover with frame of 300 mm. X 300 size (inside) with standard weight (I)

Square mouth traps (B) 150 mm. X 100 mm size p or R type

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali

of the following nominal diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making good the walls.

Total Amount=

Total Amount=

I / Weam / are willing to carryout the work at……………………...……. % above/ below percent (Should Be written in figures and words)

of the estimated rate mentioned above Amount of my / our tender works out as under

(*Please strike out whichever is not applicable).

*Estimatedamount put to tender *Estimatedamount put to tender

Deduct…….……% below Add……..…% Above

Net……………………….. Net……………………………

In words………………….. In words………………………..

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Note 1:- The Contractor shall exhibition board with detailed specification and details of work as directed by the Engineer – In – Charge for which no extra

payment shall bemade

Note 2:- The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

Note 3:- GST and Income tax TDS will be deducted at a source while making payments of bills.

Note 4:- In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt G.R.: PRC-10/2017 Cement Consumption/16/C

Date: 11/05/2017 as stated in S.O.R. therefore in R.C.C. items where the reisa change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Note 5:- Dismantling Credit Rs . 51,100.00 Deducted In First RA Bill As Per Attached Statement.

Signature of Bidder

Deputy Executive Engineer Executive Engineer

City R&B Sub-Division R&B Divison

Junagadh Junagadh