E Tender No 19/EDC(K)/2022-23

Supply Item

Supply of SMC Three Phase L.T. Distribution Box for connection of LT consumer With in built Panel Lock with key, Al bus bar RYB 25x6 mm & Al bus bar N 40x6 mm. MAKE- (SINTEX/Other IS Complied Reputed Company)

Supply of Dead End Clamps With I Hook. (As Per Specification & Drawing of UPCL)

Supply of Suspension Clamps With I Hook. (As Per Specification & Drawing of UPCL)

Supply of L.T. Bare Neutral Connectors PG Clamp 120/95 sq mm to 25/16 sq mm single bolt. (As Per Specification & Drawing of UPCL)

Supply of L.T. Bare Neutral Connectors PG Clamp 120/95 sqmm to 120/95 sqmm double bolt. (As Per Specification & Drawing of UPCL)

Supply of Shear Head type Insulated Piercing Connector body moulded from high quality mechanical Climate and UV resistant glass reinforced polyamide hot dipped galvanized bolts & contact teeth ABC size 95 Sq mm to 95 Sq mm. MAKE- (TYCO/RPG/3M/SICAME/ENSTO)

Supply of Shear Head type Insulated Piercing Connector body moulded from high quality mechanical Climate and UV resistant glass reinforced polyamide hot dipped galvanized bolts & contact teeth ABC size 95 Sq mm to 25/16 Sq mm MAKE- (TYCO/RPG/3M/SICAME/ENSTO)

Supply of M.S Stay Clamp for PCC Pole made of M.S. Flate Size 50x6 mm duly Red Oxide Painted with Fitted 18m dia hole for 65x16 mm nut and bolts and washer without cracks & burrs. (As Per Specification & Drawing of UPCL)

Supply of M.S. Half Clamp for LT Distribution box of PCC Pole made of M.S. Flate Size 35x5 mm duly Red Oxide Painted with Fitted 18m dia hole for 65x16 mm nut and bolts and washer without cracks & burrs. (As Per Specification & Drawing of UPCL)

Supply of M.S Clamp for Dead End Clamp of PCC Pole made of M.S. Flate Size 50x6 mm duly Red Oxide Painted with Fitted 18m dia hole for 65x16 mm nut and bolts and washer without cracks & burrs. (As Per Specification & Drawing of UPCL)

Supply of M.S Clamp for Suspension Clamp of PCC Pole made of M.S. Flate Size 50x6 mm duly Red Oxide Painted with Fitted 18m dia hole for 65x16 mm nut and bolts and washer without cracks & burrs. (As Per Specification & Drawing of UPCL)

Supply of Aluminum Lugs 'O' type size 25 mm for connecting PVC cable 4x25/16 sq mm. (As Per Specification & Drawing of UPCL)

Supply of Aluminium Lugs 'O' type Size 95 mm for connection LT AB Cable to T/F. (As Per Specification & Drawing of UPCL)

Aerial Bunch Cable Laying Work

Cartage of the following material by private truck from store centre Rudrapur /Haldwani/ Kashipur to work site dump store approx. distance 10 to 80 Km. including loading and unloading into truck.

PCC Pole 8.5 Meter Long

Small Line Material including Conductor & other

Erection of Following Pole after digging of pit size 0.6×0.6 mtrs & 1/6 length of support on 300×300×75 mm stone pad including fixing with all accessories complete in all respect as per Specification of UPCL.

Single Pole of Structure of PCC Pole

Fixing of Grouting of stay set complete as per RESPO drawing no. RES-16 with stay rod 16×1800 mm stay wire 7/10 SWG including excavation of earth and grouting of stay in pit with CC 1:4:8 in bottom of pit in size 0.60×0.60×0.60 mtrs, including cost of cement, sand and stone ballast etc. fixing of all accessories complete in all respect as per Specification of UPCL.

Fixing of M.S. earthing rod 20×2500 mm for earthing of support as per RESPO drawing No. RES-12 including digging earth rod 2.5 m deep below ground level connected to support with earth wire 7/16 swg fixing of all accessories complete in all respect as per Specification of UPCL.

Labour Charges For Disconnection & Re-Connection of Following L.T.Consumer Service Connection.& Shiffting of energy meter From Consumer Premises as per norms of UPCL to outside of Premises.

Single Phase connection

Three Phase connection

Dismantling of Old ACSR Conductor from Existing LT Line including Re- rolling back its conductor,wire,clamp, insulator, any other wire or items etc.including stacking and transportation of material to the UPCL Central stores 2-40 Km.

3 Phase 4 wire

2 Phase 3 wire

1 Phase 2 wire

Laying,Stringing and sagging of LT A.B Cable size (3x120+1x95/3x95+1x70) including Fixing of Insulated Piercing Connector,Dead end Clamps With I Hook, Suspention Clamp,Holding Clamps, etc. complete in all respect as per Specification of UPCL.

Laying and Fixing Insulated Cable 4x25/4x16/4x10 sq mm insulated lead.

Fixing of L.T. Distribution Box in all respect.

Fixing of Dead End Clamp with M.S Clamp.

Fixing of Suspension Clamp with M S Clamp.

Fixing of L.T. Bare Neutral Connectors PG Clamp Line to Line 120/95 sq mm to 25/16 sq mm.

Fixing of L.T. Bare Neutral Connectors PG Clamp Line to Line 120/95 sq mm to 120/95 sq mm.

FIxing of Shear Head type Insulated Piercing Connector Suitable for Jumpering for Line to Line taping 120/95 Sq mm to 120/95 Sq mm

FIxing of Shear Head type Insulated Piercing Connector Suitable for Jumpering for Line to Line taping 120/95 Sq mm to 25/16 Sq mm

UTTARANCHAL ENTERPRISES

M/S SHYAM MOHAN CONTRACTOR