REPAIR TO STREET SECURITY LIGHTS INSIDE OTM AND MD ACCN AREA AT NORTH OF RAILWAY LINE UNDER GE MISSAMARI

Taking down unservicable high mast light fittings of any height/watt/make, repair the same in site by opening cover, replace the unserviceable parts unserviceable/burnt cable etc as required at site, after repairing fixing at same position, complete all as specified and as directed. Note:- (a) Spare part i.e. driver wherever required will be measured and paid under appropriate Item(s) as 'supply only'. (b) Labour Element for replacement of unserviceable Parts will deem to be included in the QUOTED UNIT RATE.

Repair, attending and rectifying complaints of street lights fitted on steel tubular/ PCC poles of approx height 9 mtr in the area to the North of railway line by deploying technically qualified and experienced technicians by using T&P/ ladder to become reachable at a height of security light to make the street light functional by checking connection, tighting and removing of carbon/ galvonic corossion etc. complete all as directed Note:- (a) Spare part i.e. driver wherever required will be measured and paid under appropriate Item(s) as 'supply only'. (b) Labour Element for replacement of unserviceable Parts will deem to be included in the QUOTED UNIT RATE.

S&F 2.5 Sqmm PVC insulated weather proof, sheathed,3 core, multistranded copper conductor run through pole/pipe for connection from junction box to light fitting connector block complete all specified & as directed.

Supply only Electronic LED driver 150 watt 220/230/240 Volt, complete all as specified as directed of suitable make, complete all as specified and as directed.

Supply only Electronic LED driver 90 watt 220/230/240 Volt, complete all as specified and as directed.

Supply only Electronic LED driver 60 watt 220/230/240 Volt, complete all as specified and as directed.

Supply only Electronic LED driver 45 watt 220/230/240 Volt, complete all as specified and as directed.

S&F Junction Box for Street Lights of size 205x255x112 mm made out of Polycarbonate material totally enclosed, dust and vermin proof, rain protected slanted roof top, door pasted with rubber gasket, water tight IP 66/67 protection and suitable size of "connectwell" stud teriminal (provision for socket bolting)- 04 Nos suitable for 415 volts, 50 Hz, 3 phase 4 wire internal wiring system including MCB SP 06 amps- 01 No and mounted on security light pole with suitable bracket nuts, bolts including removal of exiting unserviceable all as specified and directed. Note :- Cable glands shall be fixed in inlet and out let of junction box and rate of Cable glands is deem to be included in quoted rate.

S&F All in one solar street light of 30 watt LED with all necessary acessories suitable for 2 days autonomy including solar PV panel Monocrystalline type 12 Volts, 75Wp + 10%, Lithium ferro phosphate battery 12.8 Volts, 24Ah, efficiency > 93%, IP 65, system lumen efficacy 125 Lumen/W, total lumen output >5000 lumen, MPPT charge controller 12 Volts, 5A, LED, Inbulit DC type driver, aluminum extruded body, battery casing with IP 65 protection Dusk to Dawn operation provided along with intelligent dimming profile, with neceesary protection like (i) over charged protection (ii) Deep discharge protection (iii) over current protection (iv) Sort circuit protection (v) Over voltage protection as required mounting brackets, etc with LED display to indicate the charging status of battery, automatic ON-OFF system and other acessories and system complete, bracket and supports, mounting clamps, cabling, wiring and conducting etc including taking down old unserviceable one, complete all as specified and directed. Note: Work shall be carried out as per manufactures instruction

S&F LED street light made up off pressure die cast aluminium housing wth toughened glass and high power LEDs as a light source and electronic driver of capacity 45 watts and secondary lenses with IP 66 protection. 10 KV SPD is also included for protection of driver and LEDs, lumen efficacy of light fitting shall be >=110 lm/W. and necessary mounting arrangements and necessary connection including taking down old unserviceable light fitting complete all as specified and directed. Note :- Housing of street light fitting shall be suitable for 40 to 50 mm dia of bracket.