Construction of new Aspirational Toi;ets at Industrial Park in Autonagar area in Gudivada Municipality Est:5.64 Lakhs Fund: SAC and General

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Boring for Cast-in-Situ piles Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters.

Under Reaming for Cast-in-Situ piles Under-reaming for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with Augoring and boring equipment in site as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters.

Supply and placing of the RCC M20 (Design Mix) concrete corresponding to IS 456 using 60% of mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) 40% of 12mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, cement 350Kgs including cost and conveyance of all materials like cement, fine aggrregate (sand) coarse aggregate, water etc., to site and all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work. A) PILES

Supplying, fitting and placing HYSD bar reinforcement as per drqwings and technical specifications clauses 1000 and 1202 MORD & 1100, 1600 MORTH for bars below 36mm dia including over laps and wastage, where they are not welded including cost and conveyance of binding wire and preparation and tying grills and fixing in position and labour charges etc., complete

Sand Filling of foundation trenches as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH

Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixture including cost and convayance of all materials, labour charges, machine mixing and curing charges etc., complete as per S.S.

Brick Masonry work in CM (1:6) proportion with manufactured Fal-G Blocks of size 290 x 200 x140mm using flyash of 80kgs, cement of 15kgs. Gypsum of 5kgs. And stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compresive strength not less than 50kg/sqm for walls for Superstructure walls.

Plastering for walls in CM (1:4) 12mm thick including cost and conveyance of all materials, labour charges for mixing of mortor watering curing etc. complete.

Painting to the walls with 2 coats of Acrylicemulsion paint of exterior Grade having VOC (Volatile Organic Compound) antain less than 50 Grams per liter of approved brand and shads including one coat of cement primer after throughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyaance of all materials to work site and all operational incidental, labour charges etc., complete for finished item of work as

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete for finished item of work

Dadooing to walls with Glazed red or white full body ceramic wall tiles of size 200 x 300mm and thickness 6mm 1st quality set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete.

SUPPLY & FIXING or equivalent SINGLE SIDE PRELAM SOLID PANEL WPC DOOR FRAME (CHOUKHAT) Providing and fixing factory made Pac single side Prelam door frame of the size 50X47 mm with a wall thickness of 5mm, made out of extruded 5mm rigid Pac single side prelam sheet, meter cut at two corners and joined with 2nos. of 150mm long brackets of 1515mm MS.Square tube. The two vertical door profiles are to be reinforced with 19X19mm MS. square tube of 19guage. The door frame shall be fixed to the wall using 65/100mm long MS. Screws through the frame by using Pac fasteners. a minimum of 4nos. of screws to be provided for each vertical member and minimum 2nos. for horizontal member etc. complete as per manufacture specification and direction of Engineer-in-charge.

Providing Wood Polymer Composite (WPC) solid, frostywhite single extruded factory made 2.44 mt x 1.22 mt boards 18MM thickness BMT-L.29.C

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 630 x 450 mm - Double C.P. Pillar cock ( MAT-01797 )

Supply, Installation and commissioning approved make floor mounted close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects: JAQUAR ARIA

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make conforming to IS:2556-199 Jaquar Urinal

S & F CP Long body bib cock fancy type deluxe heavy duty 12.7 mm dia Indian make

S & F CP Short body bib cock fancy type deluxeheavy duty 12.7 mm dia Indian make BMW-E.22

Supply & Fixing of 110 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) 22.20mm ODPipe - SDR 13.5 MAT-02313

Supply ,transportation and fixing of syntax tank of 1000 litres

Supply and run of 2 of 36/0.3 mm. (2.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mains including all labour charges etc.,unit 1.00 Rmt

Supply and fixing of 6 Amps 3 Pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections with all labour charges etc., complete .MAT02836

Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.. Unit each