REPAIR/REPLACEMENT OF JOINERY PLUMBING, SANITARY FITTINGS, TILLING, PLASTERING ETC FOR MD ACCN AT ZONE 5, 1B AND 1C UNDER GE (S) TEZPUR

Amount

Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts complete all as specified and as directed.

Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.complete all as specified and as directed.

Taking down of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each.complete all as specified and as directed.

Taking down of shutters of any description n.exc 1.00 Sqm and each.complete all as specified and as directed.

Refixing of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each in same opening including of taking down, easing, adjusting and renewal/refixing of builders hardware as required including renewal of unserviceable screws, etc.complete all as specified and as directed.

Refixing of shutters of any description n. exc 1.00 Sqm each in same opening including of taking down, easing, adjusting and refixing/renewal of builders hardware as required including renewal of unserviceable screws, etc.complete all as specified and as directed.

M&L Cement Concrete 1:3:6 (40 mm graded crushed stone aggregate) as in Holdfast Block including necessary form-work, etc., complete all as specified and as directed.

S&F Second Class Hardwood Plain, Solid, Straight Chowkats and Frames, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue, Pinned at Joints, complete all as specified and as directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.complete all as specified and as directed.

Supply and fix 30mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. The sizes of members of shutters as per IS-1003 (Part-2), kiln seasonable and chemically pressure treated and fitted to chowkhats complete all as specified and directed. Note : Glass / wire cloth wil be measured and paid separately

S&F Factory Made Solid PVC Door Frame of size 50 x 47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

S&F 100mm size type B-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised complete all as specified and as directed.

S&F 75mm size type C-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised complete all as specified and as directed.

S&F Extruded aluminium alloy handels fabricated type, anodised, 150mm longcomplete all as specified and as directed.

S&F Extruded aluminium alloy handels fabricated type, anodised, 100mm long complete all as specified and as directed.

S&F in repairs extruded aluminium alloy handels fabricated type, anodised, 150mm long complete all as specified and as directed.

S&F in repairs extruded aluminium alloy handels fabricated type, anodised, 100mm long complete all as specified and as directed.

S&F Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy.complete all as specified and as directed.

S&F in repair Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy.complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws complete all as specified and as directed.

S&F in repair Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws complete all as specified and as directed.

S&F in repair Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws complete all as specified and as directed.

S&F in repair for 2nd class hard wood small fittings such as shaped door & window stops, cleat including all necessary labours, articles not exceeding 200 cubic centimeter each complete all as specified and directed.

S&F in repair MS helical door spring 150 mm size incl roller and roller plate fixed to wooden or steel frames with welding etc complete all as specified and directed.

S&F in repairs 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F Steel window with side hung shutter, including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

Supply and fix, steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples complete all as specified and as directed. NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included against Glazed and Skeleton Shutter.

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples as in repair complete all as specified and as directed. NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included against Glazed and Skeleton Shutter.

Hacking out old broken glass any thickness, size, quality or description from wooden / metal frame works, glazed with putty or fixed with beads complete all as specified and as directed.

S&F Figured Glass 4.0mm thick, Pin Head / frosted type and glazing with Wooden Beads or Oil Putty in Square or Rectangular, not exc. 0.50 Sqm, complete all as specified and as directed.

S&F Sheet Glass 3.0mm thick ordinary quality glazing with Wooden Beads or Oil Putty in Square or Rectangular, not exc. 0.50 Sqm, complete all as specified and as directed.

S&F in repair of pre-laminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work thickness of 18/19 mm complete all as specified and directed.

Material & Labour in repairs 19/20 mm thick Block boards, grade 2 quality, interior grade, laminated sheet with decorative face, veneer on one face, commercial type fixed with screws to timber frame work complete all as specified and directed.

S & F Continuous (piano) hinges, 30 mm width of flaps ,mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F Bal catches with 8 mm dia steel ball magnet catches for cuboard shutter including striking plate as approved etc complete all as specified and as directed

S&F as in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

Dismanting timber scantling 40 Sqcm and over in secion in any position in framed work.complete all as specified and as directed.

M&L 2nd class Hard Wood in scantling fixed clean swan in framed work.complete all as specified and as directed.

Dismanting timber scantling under 40 Sqcm in secion In fillests, rails , posts, refters and purlins etc in any position in framed work or unframed work.complete all as specified and as directed.

M&L 2nd Class Hard Wood plain fillets square, rectangular in section clean sawnn sectional area exe 13 sqcm & n.exe 25 sqcm fixed with nails including one coat of black oil.complete all as specified and as directed.

S&F in repairs stainless steel decorative curtain rod of 25 mm bore complete all as specified and directed.

S&F in repairs stainless steel decorative curtain brackets and end cap complete all as specified and directed.

Supply & Fix in repairs floor door stopper of brass body and tongues with hard drawn steel spring, overall length cover plate 150mm complete all as specified and directed

Dismantling of Wall and Ceiling Board (Fibre, Pulp, Insulation etc.) or Insulation Board/Slab /Blankets, any thickness including Cover Fillets, complete all as specified and as directed.

S&F Gl frame work for seamless ceiling comprising of G l perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi- nium framework with screws complete all as specified and directed.

S& F in repairs of 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi- nium framework with screws complete all as specified and directed.

Dismantling asbestos cement corrugated semi corrugated etc sheets in roof covering.complete all as specified and as directed.

S&F Pre-painted colour galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted colour galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling Structural steel work includings door, gates, etc and similar works complete all as specified and as directed.

S&F Joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.

Supply & Fix framed works such as grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-410-0 or Fe 310-0 complete all as specified and directed.

Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, fixing glass panes, minor adjustment of joinery, door etc. including petty repairs material like screws/nails, plug etc. to make it functional complete all as specified and directed. (Note: Any items required to be replaced shall be paid under respective items).

Repair windwos like steel/wooden/aluminium by using wire mesh and easing windows shutter by using oil,greesing or cleaning cement morter or removing old rust, dust,mud etc make it good and smooth to openable in a normal process. complete all as specified and directed.

M&L for Closing bolt holes etc. in old corrugated steel sheets or Aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts, all set in stiff white lead, bolt n exc 25mm in length complete all as specified and directed.

M&L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) complete and removing rubbish off the premises complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L 25 mm thick PCC type B-1, 1:2:4 (20mm graded aggregate) as in sub base/floor etc complete all as specifed and as directed.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specifed and as directed.

M&L Vitrified Ceramic Tiles 10 mm thick (square/ rectangular) in Light Shade, Polished, Area of Each Tile nexc. 0.36 Sqm as in vertical surface such as Skirting, Dados, Risers to Steps etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles, complete over 15 mm thick backing layer cement mortar (1:4) complete all as specified and as directed.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6.complete all as specified and as directed.

S&F Coloured Glazed ceramic tiles 450 x 300 mm x 6 to 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm rendering in Cement mortar 1:4. complete all as specified and as directed.

M&L Paved tiles of size 300 x 300 x 22 to 25 mm thick with grey cement and pigment, set and jointed and pointed in neat cement slurry in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for Chequered cement concrete tiles of size 300 x 300 x 25 mm thick with grey cement and pigment, set and jointed and pointed in neat cement slurry in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M/L Granite (of any type) tiles 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed in CM 1:6 over cooking platform complete all as specified and as directed.

M&L 18-20 mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L Marble (green /white) work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thk cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado over 10mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Cleaning and washing existing surfaces of kota stone surface with bees wax polishing complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level complete all as specified and as directed.

M&L 75 mm thick PCC 1: 3:6 type C2 using 20mm graded agg finishing even and smooth without using extra cement as in plinth protections/path and laid fair in alternate bays n including filler joints with sealing compound grade 'A' where required complete all as specifed and as directed.

M&L 40 mm thick,Cement concrete, type B-1, (1:2:4), 20 mm graded aggregate as in floor making finished even and smooth using extra cement.complete all as specified and as directed.

M&L for PCC 1:2:4 (using 12.5mm graded aggr) in roof Kerbs,rounded or chamfered or haunching in chajjas to prevent water seepage into brick walls,including necessory formwork and scafolding upto a height of 8mtr including demolition of existing PCC complete all as specified and directed.

Demolition of reinforced cement conc of any description and in any position.complete all as specified and as directed.

M&L RCC type B1 1:2:4 (20 mm graded agg) as slab supported on wall , beams columns in floor, roofs landing and the like.complete all as specified and as directed.

S&F Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.complete all as specified and as directed.

M&L Formwork to Sides and Soffits of Floor or Roof Beams, Beam Haunchings, Girders, Bres-Summers, Lintels, Cantilevers, Shelves including supports, overhangs, etc. also splays between floors and beams, etc., flat, rough finished surfaces of concrete, complete all as specified and as directed.

Demolition of brick work built in cement mortar including pillar etc below/ above ground level etc and removing to a distance not exc 50 meter. complete all as specified and as directed by Engr-in-Charge.

M&L Brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and as directed by Engr-in-Charge.

Material and labour for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar ( 1:6) complete all as specified and directed.

Taking down cement plastering on brick or stone walls etc, including raking out joints, hacking for key scrubbing down with water etc.Complete all as specified and as directed.

M&L rendering 15 mm thick cement plaster on brick wall in CM 1:4 mixed with WPC @ 3% by weight of cement and finished even and smooth without using extra cement complete all as specified and as directed. (Note : WPC will be measured and paid for separately)

M&L 10mm thick rendering in cm (1:6) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement .Complete all as specified and as directed.

M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as on ceiling and finished fair and even complete all as specified and directed.

Supply only water proofing compound. Conforming to IS -2645.complete all as specified and directed.

M&L Preparing new plastered surfaces of Walls and appplying two coats of weather coat (Apex) over two primer coats of damp shield applied by approved applicator as per manufacturer instruction complete all as specified and directed.

M&L Preparing new Surfaces of Walls and applying Two Coats of acrylic emulsion distemper over a coat of primer and applied over 1mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even by smart painting method complete all as specified and directed.

Material and labour for applying three coats of white wash on walls including preparation of new or previously untreated surfaces complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash as in ceiling complete all as specified and directed.

Taking down existing damaged water closet alongwith complete PCC from sunken floor and providing new EWC / IWC and water proofing treatment to sunken floor as per following stage :- (i) 15mm thick plastering in CM (1:2) with WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of 85/25 gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasteing of 150 micron polythene film / 3mm APP membrane, natural colour with cold cut back adhessive. (iii) Providing cement concrete to fill up the sunken floor (PCC 1:4:8) after testing of water tightness.

Taking down existing aluminium shutter of area exc 1.0 Sqm but not exc 2.00 Sqm and refixing the same in the same opening after reparing and make functional including replacement of fitting and fixture for proper functioning as required complete all as specified and as directed.

S&F Double action floor spring hydraulically regulated, made up of minimum 1.25mm thick aluminiun alloy sheet foundation box, main body with stainless steel cover ,governing piovet made of brass ,other parts made of mild steel heavy duty and fixed as in repair complete all as specified and as directed.

S&F in repairs Aluminium (extruded section body type )door closer hydraulically regulated designation No 3, universal type , suitable for door shutter of 851 to 1000 mm in width and of weight and weight betwwen 61 to 80 kg ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Anodised aluminium window (two/three track) sliding type without sash bar and ventilator shutters ((lower type),aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.complete all as specified and directed.

S&F Anodised aluminium door shutter aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door , hinges ,anodised aluminium snap beading, screws etc.complete all as specified and directed.

S&F 4.0 mm thick heat absorbing glass of any size with aluminium beading and complete all as specified and directed.

Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumber work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), M-seal, screws, nails to make water supply/ plumbing lines functional and leak proof complete all as specified and directed. (Note: Any items required to be replaced shall be paid under respective items).

Supply and fix,as in repair,15 mm bore pillar tap, fancy type cast copper alloy, with quarter turn head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix,as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with quarter turn handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix,as in repair, 15 mm bore medi series florentine bib cock with extended lever handle, cast copper alloy,cromium plated, fancy type, , screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Product code: FLR-CHR-5043N of Jaguar or equivalent make of Prayag/Parryware/Hindware/Prima

Supply and fix, as in repair, bibtap standard of PTMT any colour screwed, for iron pipe 15mm bore (minimum weight 90 gms) complete all as specified and directed.

S&F in repairs kitchen plate rack made out of stainless steel 0.63 mm thick sheet with partitions and size of rack 800 x 250 x 900 mm with shape and pattern as per sample kept in Sample room of GE Office complete all as specified and directed.

Supply and fix, as in repairs, sheet glass self assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F Vitreous China Colour Wash down Water Closet Pan (Pedestal Pattern) with "p" or "s" trap front or back inlet including fixing Bolts with and (excluding 10 litre capacity low level Flushing Cistern) including plastic water closet seat with flat botton cover (coloured) fixed with mild steel chromium plated or aluminium hinging device and making good disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out unserviceable WC Pan and connected Items, complete all as specified and as directed.

S&F Vitreous China White Squatting Pan ‘ORISSA’ Pattern, size 580x440mm with ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan including Flushing Cistern and Flush Pipe, fixing with and including provision of cement Concrete Bedding including Taking out/ down unserviceable WC Pan and connected Items, complete all as specified and as directed.

Supply and fix, urinal flat back bowel type of size 465 x 355 x 265mm (minimum), white, with grating and union for discharge pipe, (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinals against wall in cement mortar (1:2) securing urinals to plugs with and including 60 mm brass screws and pointing around urinals back in cement complete all as specified and as directed.

S&F Plastic water closet seat, in any coloure as directed closed pattern with flat/recessed bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan as in repair complete all as specified and colour as directed.

S&F in repair brass choromium plated towel rail 600 mm long fixed to walls with chromium plated(CP) brass screws. complete all as specified and directed.

S & F in repairs Toilet paper holder of brass chromium plated fixed to walls with chromium plated(CP) brass screws complete all as specified and directed.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair 15mm bore dia brass choromium plated wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs bathroom mirror cabinet size of 450 x 350 mm with all necessary fittings complete all as specified and directed.

S&F Central hole for Hot and Cold water supply basin mixer without pop-up waste system, brass chromium plated screwed down for iron pipes,including necessary fittings etc as in repair , complete all as specified and as directed.

S&F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

Supply and fix, as in repair, stop valve, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions complete all as specified and directed.

S&F in repairs stop cock cast copper alloy, fany type ,chromium plated, screwed down, high pressure, with crutch of butterfly handle screwed both ends to iron pipe of size 15mm, complete all as specified and directed.

S&F in repairs angle cock 15mm bore, two way, chromium plated, fixed to GI or steel tubing incl fittings complete all as specified and directed.

S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a pair of Cast Iron Brackets duly painted including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed.

Supply and fix, as in repair, vitreous china wash basin pedestal type, white, flat back size 580 x 450 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.

S&F Stainless Steel Sink with Drainage Board l.0mm thick Overall size 915mm x 460mm and Bowl size 410 mm x 355 mm x 165 mm for Kitchen or Laboratory with Plugs, Washers, Brass chromium plated Waste Fitting 32mm dia, PVC waste pipe, a Pair of Cast Iron Brackets duly Painted including Cutting and Pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including Taking down/out unserviceable Sink and connected Items, complete all as specified and as directed.

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm.complete all as specified and directed.

S&F Chromium Plated waste coupling heavy full thread 32mm (brass) fixed to stainless steel sink including necessary fixing arrangement as in repair complete all as specified and directed.

Supply and fix,as in repair, 32 mm dia PTMT 610 mm long waste pipe suitable for WHB complete all as specified and directed.

Supply and fix,as in repair, CP 40mm dia waste coupling with inlet and out let screwed for pipe or connections including packing, union and cap etc complete all as specified and directed.

Supply and fix,as in repair, 40 mm dia PVC 610 mm long waste pipe suitable for complete all as specified and directed.

S&F in repairs stainless steel grating 100/75mm dia complete all as specified and directed.

Supply and fix, as in repair, Overhead Shower 100 mm Round / Square Shape Single Flow (Brass Chromium Plated) with Rubit Cleaning System, including fixing to steel pipe or union of 15mm bore complete all as specified and direcetd.

Supply and fix, as in repairs, Hand Shower (Health Faucet) (Brass chromium plated) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified and as directed.

S&F White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected Items, complete all as specified and as directed.

Supply and fix, as in repair,15 mm dia 600 mm long connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed.

Supply and fix, as in repair, steel handles for steel window for left and right side shutter complete all as specified and directed

Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.

Taking up or down 20 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.

S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed,

S&F of 20 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed,

S&F as in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed,

Supply and fix,as in repairs, 75 mm dia of outlet PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed,

Supply & fix radiant door bottom sealing strip guard (door seal) complete all a specified and directed.

Demolition of old damaged existing water proofing compound on RCC roof of any description and specification and cleaning the surface thoroughly complete all as specified and directed.

M & L 15 mm thick in cement mortar (1:4) on existing roof surface true to level with WPC @3% of cement after applying cement slurry @3Kg/Sqm and applied coat of hot blown bitumen of graded 85/25 @1.2 Kg/Sqm.complete all as specified and directed.

Supply and laying 3mm thick APP based Polymeric membrane of approved manufacture with weight not less than 3.60 Kg per Sqm reinforced with non-woven polyster febric weight not less than 150gms per Sqm.The overlap shall be not less than 100mm on transverse direction and 75mm on longitudinal direction and sealing overlaps and Applying evenly one coat of aluminium paint @ 0.10 liter per square metre over the APP based polymeric membrane complete all as specified and as directed.

Disconnecting existing tanks exc 500 n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

M&L for complete removal of existing treatment and plaster by the use of wire brush and applied a coat of Dr Fixit super latex with cement ratio of 1:1.5 in both horizontal and vertical direction after that applied Dr Fixit super latex with water complete all as specified and directed by Engr-in charge .

M&L Preparing new Wood and Wood Based Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed.

M&L Preparing new Steel or Iron Surfaces of any description, exe 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide, Zinc Chrome Primer, complete all as specified and as directed.

S&F 18/19mm thick plywood grade A (Termite treated / water proof) ,type BB fixed with screws to timber /iron frame work as in cupboard, drwer, kitchen cabinate etc complete all as specified and as directed.

M&L for 0.90 mm thick decorative choice of lamination type -1 of surface finish , colour and pattern as approved fixed with adhesive or aral Dite epoxy resin Hetex or fevicol etc as per manufacturers instructions complete all as specified and as directed.

S&F in repair Stainless steel zero crank hinges (auto) fancy type (with Euro concealed hinges) fixed to shutters in cupboards of standard size and shape for modular kitchen complete all as specified and as directed.

S&F in repairs Drawer side channel of std size and incl of roller for moving drawer,mild steel bright finish,or electro galavanised width of flap 30mm & Length 60 mm complete all as specified and as directed.

S&F in repairs stainless steel fancy type,bright finish handles fixed with screw,of 125mm size complete all as specified and as directed.

S&F SS box type for cutlery busket size 420 x 485 x 100mm fixed in kitchen cabinet complete all as specified and as directed.

S&F SS box type for cup & saucer size size 420 x 485 x 100mm fixed in kitchen cabinet complete all as specified and as directed.

S&F SS box type for thali size 420 x 485 x 200mm fixed in kitchen cabinet complete all as specified and as directed.

S&F SS box type for plain busket size 420 x 485 x 200mm fixed in kitchen cabinet complete all as specified and as directed.

S&F Stack clamps including bolts and nuts and securing ends of stays to wall or roof for 100/75mm bore complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories).complete all as specified and directed.

S&F PVC (SWR) Soil, Waste and Ventilating Pipe 110mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed.

S&F in repairs PVC (SWR) 110mm dia bends any radius and Jointing with Solvent Cement, complete all as specified and as directed.

S&F in repairs PVC (SWR) branch 110mm bore pieces, single ( single Y ) equal or unequal and Jointing with Solvent Cement, complete all as specified and as directed.

S&F in repairs PVC (SWR) junction110mm bore single ( single T) equal or unequal and Jointing with Solvent Cement, complete all as specified and as directed.

Supply and fix, PVC cowls 110 mm bore and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Soil, Waste and Ventilating Pipe 75mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed.

S&F in repairs PVC (SWR) 75 mm dia bends any radius and Jointing with Solvent Cement, complete all as specified and as directed.

S&F in repairs PVC (SWR) branch75 mm bore pieces, single ( single Y ) equal or unequal and Jointing with Solvent Cement, complete all as specified and as directed.

S&F in repairs PVC (SWR) junction75 mm bore single ( single T) equal or unequal and Jointing with Solvent Cement, complete all as specified and as directed.

Supply and fix, PVC cowls 75 mm bore and Jointing with Solvent Cement, complete all as specified and as directed.

NOTES: 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. The rates for RCC/PCC shall deemed to include the cost of formwork, shuttering etc., required for complete and proper execution of the item. Refer Schedule "A" notes for details.

Chinmay Traders (BID ID -3483505)

AVASANA SOLUTIONS PRIVATE LIMITED (BID ID -3483868)

M/S SINGH FURNITURE MART (BID ID -3483826)

M/S SAIKIA ENTERPRISE (BID ID -3488799)