REPAIRS / REPLACEMENT OF CERTAIN WOODEN / STEEL AND ALUMINIUM JOINERIES, CUPBOARDS, HARDWARE FITTINGS, BIRD PROOF NETTING IN HANGARS AND TMS ETC IN CERTAIN BUILDINGS OF TECH AND ADM AREA AT AFA HYDERABAD

Amount

Taking down chowkats or frames with shutters exc 1.5 sqm but n exc 4 sqm each of any description (without taking off shutters from the frame) complete all as specified and as directed.

Taking down chowkats or frames with shutters n exc 1.5 sqm each of any description (without taking off shutters from the frame) complete all as specified and as directed.

S&F 35mm thick second class hard wood Plain framed, panelled shutter with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial venneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F of factory made 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F for 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted withcut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and as directed.

S & F solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S square tube complete all as specifid and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame complete as specified by the manufacturer complete all as specified and as directed.

S&F to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant complete all as specified and as directed.

S & F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed. Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately.

S & F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F powder coated aluminium frame( Minimum thickness of powder coating 50 micron) for doors, windows, ventilators, partitions etc with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F powder coated aluminium door shutters, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and as directed. Note : Powder coating should not be less than 50 micron.

S & F powder coated aluminium windows and ventilator shutters, sliding type, without sash bars aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as rollers, locking arrangement, handles etc complete all as specified and as directed. Note : Powder coating should not be less than 50 micron.

S & F 12mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination in aluminium doors/partition complete all as specified and as directed.

S & F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S & F 75 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F of Aluminium anodised,barrel tower bolts of extruded section of size 200 mm long etc complete all as specified and as directed.

S&F of Aluminium handles, cast type, anodised of size 100 mm long etc complete all as specified and as directed.

S&F of Aluminium handles, cast type, anodised of size 200 mm long etc complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type)of size 300mm and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed.

Dismantling wall and ceiling boards( fibre, pulp,insulation,etc) or insulation boards/slabs/blankets, any thickness,including cover fillets , aluminium frame work etc of any description complete all as specified and as directed.

Supply and fix only Armstrong Ceiling Classic Lite 600x600x16mm, NRC-0.55, grid size m/t 32x24mm, cross Tee of 1200mm of size 27x24 mm and cross Tee of 600mm of size 25x24 mm and wall angle of size 19x19mm and fixed all around the wall to form a grid of size 600x600. Tiles shall be inserted in the formed grid and suspended with 2mm GI wire at every 1200mm intervals C/C complete all as specified and as directed.

Supply and fix only Armstrong Ceiling Classic Lite 600x600x16mm, NRC-0.55, grid size m/t 32x24mm boards including taking down old ceiling boards complete all as specified and as directed.

S & F in repair 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with nails complete all as specified and as directed.

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.

M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

S&F for Brass handles, cast type, polished bright 150 mm long in repairs complete all as specified and as directed.

S&F Steel Auto closing concealed Hydraullic soft closing Hinges of size 116x 60 mm with holes fixing with screws for cabinet doors complete all as specified and as directed.

S&F in repair Continuous (piano) hinges, brass width of flap 30mm bright finish or electro galvanised complete all as specified and as directed.

M & L for prepartion of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Hacking out old unserviceable glass / broken glass panes of any description, from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones in repairs complete all as specified and as directed.

S&F rough cast wired glass, 6.4mm thick and glazing with oil putty in square not exc 0.5 sqm complete all as specified and as directed.

S & F 4 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in wooden frames in squares not exceeding 0.5 Sqm and in aluminium frames in each pane complete all as specified and as directed.

S&F 4mm thick frosted glass sheet and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and as directed.

S & F 4.80 mm thick sheet glass, ordinary quality and glazing in aluminium door frames with beading not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

M & L for taking down existing aluminium doors, resecuring or easing & adjusting and refixing in same opening after necessary repairs for smooth functioning of any description exc 1 sqm but not 2.5 Sqm each complete all as specified and as directed.

S&F of 300mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and as directed.

S&F in repair of 300mm mild steel, ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and as directed.

S&F in repair 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S & F in repair 75 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S & F in repair 50 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F in repair Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type)of size 300mm and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed.

S&F in repair Aluminium handles, cast type, anodised of size 125 mm long etc complete all as specified and as directed.

S&F in repair of Aluminium handles, cast type, anodised of size 150 mm long etc complete all as specified and as directed.

S&F in repair of Aluminium anodised, barrel tower bolts of extruded section of size 200 mm long etc complete all as specified and as directed..

S&F in repair of Aluminium anodised, barrel tower bolts of extruded section of size 150 mm long etc complete all as specified and as directed.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished etc complete all as specified and as directed.

S & F in repair of 125 mm Hasp and staple, safety type, aluminium hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified.

S&F in repair Fancy type 20mm dia curtain rod , chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.

S&F in repair Fancy type 25mm dia curtain rod , chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.

S&F 140mm Floor door stopper of brass body and tongue, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F in Repairs 140mm Floor door stopper of brass body and tongue, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F of Mortice lock, of brass 4 levers vertical type of size 100 mm etc complete all as specified and as directed.

S&F in repair of Mortice lock, of brass 4 levers vertical type of size 100 mm etc complete all as specified and as directed.

S & F door closer, hydraulically regulated, aluminium body designation No 2 universal type (ISI marked), suitable for shutters of weight between 36 to 60 Kg fixed in repairs complete all as specified and as directed.

S & F in repairs door closer, hydraulically regulated, aluminium body designation No 2 universal type (ISI marked), suitable for shutters of weight between 36 to 60 Kg fixed in repairs complete all as specified and as directed.

S&F in repair for toughened glass door bottom lock fittings made of stainless steel complete all as specified and as directed

S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F Steel rolling shutters, with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, complete: push pull or manual typ all as specified and as directed.

S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

S&F Ball bearing for rolling shutters complete all as specified and as directed.

M & L for preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed.

Rajesh Engineering Consultants (BID ID -3494975)

S J REDDY (BID ID -3494632)