Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.2 LAdmitted-Fee/PreQual/Technical/Finance THEKKEKARA MAKKAPPALLIL PUTHENCHANTHA P O | KERALA | L1 | Admitted-Fee/PreQual/Technical/Finance | |
| 2 | L2₹4.3 L+₹10,353.08 (2.47%)Admitted-Fee/PreQual/Technical/Finance | L2 | Admitted-Fee/PreQual/Technical/Finance | |
| 3 | L3₹4.5 L+₹29,051.78 (6.92%)Admitted-Fee/PreQual/Technical/Finance | L3 | Admitted-Fee/PreQual/Technical/Finance | |
| 4 | L4₹4.7 L+₹46,156.26 (11.0%)Admitted-Fee/PreQual/Technical/Finance | L4 | Admitted-Fee/PreQual/Technical/Finance |
| Sl No | Description | Qty | Unit | Arun Kumar. R L2 | Shaji Andrews L1 | RICHY BENEDICT L3 | Joseph Francis L4 |
|---|---|---|---|---|---|---|---|
| 1.00Renovation of St Adhays Government LPS Nalunnakkal | |||||||
| 1.00 | 15.31:Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | 166.5 | sqm | 200.46 ₹33,376.59 | 195.64 ₹32,574.06 Lowest | 209 ₹34,798.5 | 217.14 ₹36,153.81 |
| 1.00 | 15.14.2:Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead:Of sectional area below 40 square centimeters | 430.5 | metre | 17 ₹7,318.5 | 16.59 ₹7,142 Lowest | 17.75 ₹7,641.38 | 18.42 ₹7,929.81 |
| 1.00 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 360.37 | kilogram | 107.72 ₹38,818.84 | 105.13 ₹37,885.49 Lowest | 112.5 ₹40,541.4 | 116.69 ₹42,051.34 |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 371.56 | kg | 213.19 ₹79,212.88 | 208.06 ₹77,306.77 Lowest | 222 ₹82,486.32 | 230.93 ₹85,804.35 |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 164.28 | sqm | 777.46 ₹1,27,721.13 | 758.7 ₹1,24,639.24 Lowest | 812 ₹1,33,395.36 | 842.14 ₹1,38,346.76 |
| 1.01 | 12.51.2:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Flashings / Aprons (Upto 600 mm) | 22.2 | metre | 477.94 ₹10,610.27 | 466.45 ₹10,355.19 Lowest | 498 ₹11,055.6 | 517.71 ₹11,493.16 |
| 1.01 | 21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | 5.6 | kg | 780.97 ₹4,373.43 | 762.19 ₹4,268.26 Lowest | 815 ₹4,564 | 845.94 ₹4,737.26 |
| 1.01 | 50.12.5.1:Providing and fixing false ceiling with e board classic tile or equivalent make of size 610x610x4 mm ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately) | 162.06 | sqm | 732.86 ₹1,18,767.29 | 715.24 ₹1,15,911.79 Lowest | 765 ₹1,23,975.9 | 793.94 ₹1,28,665.92 |
| 1.01 | 50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | 0.04 | cum | 1,04,376.45 ₹3,757.55 | 1,01,866.5 ₹3,667.19 Lowest | 1,09,034 ₹3,925.22 | 1,13,059 ₹4,070.12 |
Tender Value
₹4.7 L
EMD Value
₹11,646
Closing Date
22 Sept 2026, 6:00 pmClosed
Assistant Engineer
Office of Assistant Engineer, LSGD Section, Vakathanam Grama Panchayat
Annual Plan-338/VKM/26-27 Renovation of St Adhays Government LPS Nalunnakkal-Vakathanam GP-General Civil Work
2026_LSGD_868610_17
02/AE/LSGD/VKM/26-27/E-TENDER
Open Tender
Civil Works - Buildings
Item Rate
Vakathanam GP
Please refer Tender documents.
10 documents required · 10 mandatory
₹1,030
Yes
₹11,646
Yes
25 Sept 2026
14 Sept 2026
24 Sept 2026
14 Sept 2026
22 Sept 2026
14 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Renovation of St Adhays Government LPS Nalunnakkal | |||||
| 1.001 | 15.31:Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | 166.5 | sqm | - | - |
| 1.002 | 15.14.2:Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead:Of sectional area below 40 square centimeters | 430.5 | metre | - | - |
| 1.003 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 360.37 | kilogram | - | - |
| 1.004 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 371.56 | kg | - | - |
| 1.005 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 164.28 | sqm | - | - |
| 1.006 | 12.51.2:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Flashings / Aprons (Upto 600 mm) | 22.2 | metre | - | - |
| 1.007 | 21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | 5.6 | kg | - | - |
| 1.008 | 50.12.5.1:Providing and fixing false ceiling with e board classic tile or equivalent make of size 610x610x4 mm ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately) | 162.06 | sqm | - | - |
| 1.009 | 50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | 0.04 | cum | - | - |
stage.html
html • 0.02 MB
finance_1472800.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.27 MB
Tendernotice_2.pdf
PDF • 0.19 MB
Tendernotice_3.pdf
PDF • 0.19 MB
Tendernotice_4.pdf
PDF • 0.19 MB
Tendernotice_5.pdf
PDF • 0.43 MB
BOQ_1472800.xls
BOQ • 0.30 MB
nitsbd.pdf
Tender Documents • 2.20 MB
nitall.pdf
Tender Documents • 0.21 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .