E-Tender No.13/EDC(S)/2024-25

Amount

Material

11 KV ACS AL-59 Equivalent 52.88 Sq mm covered conductor(SS4240813 & SS4240814) {EN. 50397-1:2006} by Electron beam radiation process. Current capacity 200 Amp.

MVCC accessories as per EN-50397.2 as below

11 KV tension clamp with bail and IPC

11 KV Suspension ties on every Pin Insulator

11 KV IPC for CC to CC connection in every section Pole

11 KV IPC for CC to Bare connection at both end and Tapping

11 KV Mid span jointing kit at every 500 mtr. Cable drum

IPC with Aluminium bail for earthing

Holding Clamp for SP-33/55 with N&B

Labour

Cartage of material from central store Srinagar to road side including loading and unloading at both points

ST pole SP 55

ST pole SP 33

Small misc. material

Head load cartage of folloeing material from road side to work side dist. Approx 00 to 01 km loading/unloading complete

ST pole SP 55

ST pole SP-33

Small misc. material

Removing of old Rabbit conductor with opening of binding, jumpering and making of bundle with carriage from pit to JE Store including loading/unloading complete

Laying spreading stringing and sagging of 11 kv line in 3 phase of the following wire as phase wire including proper sagging with binding and jumpering as per user mannual and sagging Chart complete work.

11 kv ACS AL-59 equivalent 52.88 sq.mm covered conductor.

Excavation of earth for pole pit of size 0.9x0.6x1/6 fo full length of pole as per Norms

Grouting of pole in size 0.45x0.45x1/9 of the support in cc ratio 1:4:8 block including cost of cement, sand and stone ballast

Erection of following Pole in proper level and alignment alongwith fixing of all accessories

Single Support ST pole SP-33

Single Support ST pole SP-55

Proper Alignment of Tilted poles

T/F Connection and Jumpering of Covered Conductor

Jumpering and Connection of Section pole

Painting of poles with angle and channel and all steel part by one coat of Red oxide primer and two coats of Aluminium paint

Fabrication of MS Channel and angle

Fixing of MVCC accessories

11 KV tension clamp with bail and IPC

11 KV Suspension ties on every Pin Insulator

11 KV IPC for CC to CC connection

11 KV IPC for CC to bare conductor

11 KV Mid span jointing kit

IPC with Aluminium Bail for earthing

Head load cartage of Rabbit conductor scrap from work side toRoad side dist. Approx 00 to 01 km loading/unloading complete

Safe cartage of Rabbit Conductor scrap from Road side to Store centre, Rishikesh Approx. Dist. 150 Km.

M/s S S ENTERPRISES

Sagar Engineering Company