General

Filling of Sand for foundation trenches including cost and conveyance off all materials and all labour charges ramming, watering etc, as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH Existing Bed

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH (RBR-STCL-5) old Brick wall

Providing M-35 grade 80mm thick Interlocking paver block with fitting and fixing in compl. job.

Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911-1980 as per approved designs including all operations, incidental, labour charges, hire charges of Machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters - 1 Rmt. Gujjanagundla park - For piles 300mm

Carting away the surplus excavated earth from the work site with a lead of 3 km beyond initial lead including loading, unloading and conveyance but excluding stacking charges etc., complete - 1 Cum. As per Earth work qty

Construction of granular sub-base (GSB) by providing Well graded material for Grading III mixing in a Mechanical Mix Plant at OMC carriage mixed material to work site spreading in uniform layers with motor grader on prepared surface and compacting with 80-100 kN Vibratory Roller to achieve the desired density, complete as per Technical Specification of MORTH. For piles 300mm For Basement

Supply and placing of the Design Mix Concrete for M-20 Grade corresponding to IS 456 using CONCRETE MIXER with 20mm H.B.G Metal including cost and conveyance of all Material like cement, Sand, water etc., to site, operational, incidental and Labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete (APSS No.402) with minimum cement content as

For Plinth Beam

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded. (BLD-CSTN-2.19) For columns / Plinth Beam / stirrups / Slab

Brick Masonary in C.M (1:6) using 2nd Class well burnt ground moulded traditional size bricks of locally available having a crushing strength of not less than 35 Kg/Sq.Cm & size of 23x11x7 Cm including cost & conveyance of Material to site, mixing of Cement Mortar & laying of bricks & mortar to specified thickness, watering, curing, including all scaffolding, hire & operational charges of Machinery, all Labour charges & all water lead charges etc. complete for WALL

Plastering in C.M (1:3) 12 mm thick including cost and conveyance of all Material, Labour for mixing Material, laying and curing etc., complete - 10 Sq.M (BLD-CSTN-6.2) WALL

Ceiling Plaster: Ornamental Plastering 12mm thick in two coats, first with 8mm thick in C.M (1:6) prop and second with 4mm thick in C.M (1:3) prop including cost and conveyance of all Material to site, Screening and mixing, laying finishing with sponge finish and watering, curing including all Labour charges

Flooring with vitrified tiles of 1st quality, set over base coat of C.M (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kg/sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete for finished item of work (BLD-CSTN-7-5) - 10 Sq.M.

Dadooing to walls with Natural Granite Stone of any size 1st Quality set over base coat of C.M (1:3) prop. 12mm thick and neat grey cement slurry of honey like consistency spread @ 3.3 Kg of cement/sqm and jointed with neat white cement paste at 0.20 kg/sqm mixed with pigment of matching shade to match the shade of tiles including cost and conveyance of all Material Labour charges, water to work site, operational, incidental, mixing mortor, fixing in position, lift charges, curing, etc., complete for finished item of work - 10 Sq.M

Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 20101 of size 101.6 x 44.45 x 3.18 mm Shutter frame top, bottom and verticals of 19501 of size 44.45 x 47.62 x 3.10 mm and Middle lock rail of 2001 of size 49.91 x 44.45 x 3 mm with plain clear float glass 5 mm thick including supply and fixing aluminium handles of 100 mm for each shutter, floor springs/hydraulic door closure assembly and all Labour charges for fixing the fixtures with required no of screws, bolts and nuts and including Labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work (BLD-CSTN-11-31) - 1 Sq.M

Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours)(Total 3 Coats)

Supplying and fixing of 25mm Outer Dia. heavy duty (2.00 to 2.20 mm thickness) grade with IS.9537, Part-3 regid PVC Pipe of VIP/Besto plast/GM/Sudhakar/Polyline of ISI mark for CONCEALED IN ROOF SLAB with all required accessories including chisiling the wall where ever necessary including masonry work for Light/Fan Points and seperate plug point with MS deep junction boxes including all labour charges etc. complete.

Supplying and fixing of 25mm Outer Dia. heavy duty (1.60 to 1.80 mm thickness) grade with IS.9537, Part-3 regid PVC Pipe CONCEALED IN WALLS with all required accessories including chisiling the wall where ever necessary including masonry work for Light/Fan Points and seperate plug point with junction boxes and bends of makes Gold medal/Million plast/GM/Sudhakar/Polyline /Bestoplast. Including all labour charges etc. complete.

Wiring with 2 runs of 14/0.3mm (1.00 Sq.mm) PVC insulated F.R flexible copper cable (ISI Mark) complete for LIGHT POINTS, FAN POINTS & BELL POINTS in Residental Building.

Filling of Red Earth for foundation trenches including cost of conveyance off all materials and all labour charges ramming, watering etc, as per drawing and technical specification in Clause 305.39 MORD & 304 MORTH track

Supply and fixing of Batten Holder/Slanting Holder of Anchor/Gold medal olive/Millon Zoom in lieu of ceiling rose of light point complete with all connections and all labour charges etc., complete (for New installation) without bulbs for finished item of work..

Supply and fixing of 6-A/6A 1 way combi Socket with shutter make of Legrand Arteor/Schneider Zen celo/Honeywell Blenge Plus duly recessed in module box including cost and conveyance of all materials to work site and all labour charges etec., complete.

Supply and fixing of 6-A/10-A 3/2 Pin 2 Module Modular Socket with shutter of make Legrand Arteor/Schneider Zen celo/Honeywell Blenge plus with 6-A/10-A, 1 Way 1 Module Modular switch on a common switch board of with Honeywell/Blenge plus 6-A Switch Control

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white glazed with P trap MAT-01789 BMW-D.13, SSR 2023-24 For Toilet

Labour charges only for fixing European Water Closet with P or S trap as per standard practice LAB-00168 BMW-D.15, SSR 2023-2024 For Toilet

Supplying & Fixing low down porcelain flushing tank 10 Lit Capacity with internal components MAT-01788 BMW-D.11, SSR 2023-2024 For Toilet

Labour charges only for fixing low down porcelain flushing tank with internal components LAB-00167 BMW-D.12, SSR 2023-2024 For Toilet

Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part 6, Sec-6-1974 fixed with screws complete Indian ladies urinal BMW-D.34

Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/Nice/Esso or equivalent complete with standard CI brackets including wooden block: 630 For Toilet

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks Rate as per b) - do - labour charges only. For Toilet (Supply+Labour charges)

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurar SDR 11 and SDR 13.5 pipes are made from identical CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007).

22.20mm ODP pipe - SDR 13.5 BMW-I.221 SSR2021-2022 Si No 815

28.60mm ODP pipe - SDR 13.5 BMW-I.222 SSR2021-2022 Si No 816

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potablewater supplies conforming to IS: 4985/2000 (3rd revision) with bell ends(Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes

90 mm Dia For waste water 6 Kgs/cm2

110 mm Dia For Grey water 6kgs/cm2

S&F 12.7mm N.P bib tap Indian make 3 heavy duty - do - labour charges only. For Taps

Supply of outer dia heavy grade with IS:9537 part 3 FRLS regid PVC pipe Makes: Precision/universal & Marudhar/VIP/Goldmedal/Million Plast/GM/Sudhakar/Polycab/Anchor/Polyline/Orbit/AKG

20 mm (2.10mm thickness)

25 mm (2.20mm thickness)

Supply of 6 Modular Hot Dip galvanized 20/18 SWG 6 Module box with earthing terminal. 6 Modular

Supply of 6 Modular Cover Frame Makes: Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&Tenglaze/GM-Zenova/ Goldmedal(GIFA). 6 Modular Cover Frame

Supply of FRLS / HFFR / ZHFR PVC insulated 1100V grade as per IS: 694 / 1990 specification for Copper cable. Makes:V-Guard/Bonton/Finecab/HPL/GM/Million/Goldmedal/Fortune Art/Sudhakar/Orbit/Tamra/Anchor/Plaza/Vihan/Olivin 22/0.3mm (1.5 Sqmm)

Supply of 6A / 10A 1 Way 1 Module Modular Switch. Makes: Legrand Arteor/Scheider Zen Celo/Crabtree Murano or Amare/ L&T englaze/GM-Zenova/Goldmedal (GIFA)

Supply and fixing of 20W, 2400 lumens, T8 not less than 1100 mm length LED retrofit tube light with aluminum anodized body, input voltage AC 220 - 260 Volts, having luminous efficacy >120 lumens/watt, with PF>0.9, surge protection: 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K-5700K, minimum CRI>70, etc., as per IS 10322 (Part 5/ Sec 1), 2012, complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I ELEC-3.8.16, Si No:128 Page No:68 SSR2023-2024 For toilets

Provision for Seignorage charges

Provision for DMF @ 30% on Seigniorage Charges

Provision for Consideration @ 100% on Seigniorage Charges

Provision for Merit @ 2% on Seigniorage Charges

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.739 %

Unforeseen item