Installation of new production well with ancillary works at Nasadipur ward no - 6 in Kendrapara Municipality.

Installation of new Production well

Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by Mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer-in-Charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of finished bore suitable for lowering of 200 mm dia GI/PVC pipes for housing, fitted with socket and with or without well screen as per the necessity for the soft, medium, hard and boulder formation (GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion) including lower and withdrawing of casing pipe after drilling 200 mm to 450 mm dia in over burden portion.

00 mtrs. to 100 Mtrs.

101 mtr. to 200 Mtrs

201 Mtrs to 285 Mtrs.

Supplying all labour T&p and jointing materials and lowering the PVC casing pipes , fitting and well screen in position including fitting and fixing of centalizer cutter plug and eashing the bore etc. all complete as per direction of E.I.C.

200mm dia PVC Pipe ( Sch-120)

Supplying all labour T& P and materials for cleaning and developing the tube well with compressor continuously washed till clean and adequate discharge is obtained from the tube well including supply and use of necessry equipement and labour complete in all respect. as per direction of E.I.C

Supplying all labour T&p and grounting with cement benonite slurry for saline sealing in the bore arounf the 50mm dia PVC casing pipe etc.all complete as per direction of E.I.C

Supplying all labour T& P and packing the bore with washed gravels ( size- P6) around the pipes in good quality including cost of gravels etc.all complete as per direction ofd E.I.C.

Supplying all labour T& P and grounting with cement slurry for sanitary sealing in the bore around the upper most 3 mtr of 125/ 100mm dia PVC casing pipe properly as per direction of E.I.C (

Supplying and providing the following materials during reaming saline and sanitary sealing lowering of pipes as specifications with lead of all materials to site. Cost of materials-

200mm dia ASTM PVC Pipe ( sch-120)

200mm dia PVC top cap

200mm dia PVC conical plug

200mmx600mm long pvc short piece

Adhessive for treaded joint (L.S)

Construction of pump house

Supplying all labour, t&p for earth work in excavation of all kinds of soil within 50m intial lead and1.5m initial lift including rough dressing and breaking the clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth as per direction of engineer in charge.

Supplying all materials, labour, t&p for filling sand infoundation and plinth, watered and rammed with lead of all materials to site.

Supplying all materials, labour, t&p and providing cement concrete (1:3:6) using 4cm size c.b.h g metal including hoisting, laying and curing with ead of all materials to site.

Supplying all materials, labour, t&p for Cement concrete (1:11/2:3) with 12mm.size crusher broken hard Granite chips for R.C.C.work including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete .

Supplying all materials, labour, t&p and providing m.s reinforcement for R.C.C work including cutting, bending, binding and tying grills and placing inposition including cost of binding wire 18 to 20gague with lead of all materials to site.

Supplying all materials, labour, t&p for brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:4) brick masonary in FOUNDATION & PLINTH & Superstructure

Supplying all materials,labour, T&P and making Rigid & smooth centering & shuttering for R.C.C work including false work & dismantling those after casting etc all complete as per specification and direction of the Engineer-In- Charge

Column Base-

Pump house wall plinth Beam, Pump house Column, Roof Beam-

Lintel-

Roof, Chajja, Karnish-

Supplying all materials, labour, T&P, and providing 12mm thick cement plaster (1:4) over brick work including punning curing with lead of all materials to site.

Construction Compound wall and approach road

Supplying all labour, t&p for earth work in excavation of all kinds of soil within 50m intial lead and1.5m initial lift including rough dressing and breaking the clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth as per direction of engineer in charge.

Supplying all materials, labour, t&p for filling sand infoundation and plinth, watered and rammed with lead of all materials to site.

Supplying all materials, labour, t&p and providing cement concrete (1:3:6) using 4cm size c.b.h g metal including hoisting, laying and curing with ead of all materials to site.

Supplying all materials, labour, t&p for Cement concrete M20 with 20mm.size crusher broken hard Granite chips for R.C.C.work including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete .

Supplying all materials, labour, t&p and providing m.s reinforcement for R.C.C work including cutting, bending, binding and tying grills and placing inposition including cost of binding wire 18 to 20gague with lead of all materials to site.

Supplying all materials, labour, t&p for brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:4) brick masonary in FOUNDATION & PLINTH & Superstructure .

Supplying all materials,labour, T&P for fitting & fixing of M.S grill gate etc all complete.

Supply all materials, labour, T&P and providing two coat enamel paint on new iron work including cost of paint etc all complete

Supplying all materials,labour, T&P and making Rigid & smooth centering & shuttering for R.C.C work including false work & dismantling those after casting etc all complete as per specification and direction of the Engineer-In- Charge

Column Base-

Compound Wall Plinth Beam, Compound Wall Column-

Suppling all materials, labour, t&p for providing Cement concrete (1:2:4) with 12mm size crusher broken hard granite metal including cost of all labour, materials with all taxes, lead, T & P etc all complete.

Supplying all materials, labour, T&P, and providing 12mm thick cement plaster (1:4) over brick work including punning curing with lead of all materials to site.

Supplying all materials,labour, T&P for Finishing walls with water proofing cement paint of approved shade on old work two coats to give an even shade including cost of all labour ,materials & P with taxes ,transportation etc all complete

M.S. work and Tee connection from the production well to the pipe line.

Supplying all labour, materials t&p for Cutting following types of road for taking the water supply pipe line through and making good to the damages including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.

Concrete Road- (Manually)

Metal road cutting-

Supplying all labour, t&p for earth work in excavation of all kinds of soil in pipe line trenches within 50m intial lead and1.5m initial lift as per direction of engineer in charge.

Supplying all materials, labour, t&p for laying of M.S pipe including earthwork , road cutting , cutting pipes to length , welding the same as required at site , making flange joint including cost of flange and Nut bolts , rubber insertion and dewatering ,providing light & barriers and making good the damages etc all complete as per direction of engineer in charge.

150mm dia M.S. pipe 6.3mm thick (Tata)

150mm dia M.S. pipe Cutting

150mm dia M.S. pipe welding, Flanged Welding

150mm dia M.S. Flange ( 10mm thick)

150mm dia Flange Joint

Supplying fitting and fixing of 3" dia G.I Column pipe ( heavy) 3mtr long and both side flanged welded with hole etc all complete.

Supplying all materials, labour, t&p and fabrication of 3" dia G.I pipe Tripod of each leg 6mtr long including welding of 25mm dia G.I of 200mm length in one leg for use as ladder with flange foot at each etc all complete.

Supplying all materials, labour, t&p for fixing M.S. Clamp & top cover of the production well including nut & bolt arrangements ect. all complete.

3"dia M.S. Clamp-

8mm thick M.S. top cover of size 0.30x0.30m

Supplying all materials, labour, t&p for lowering of pump & motor inside the production well with supply of plastic rope, Nut & bolt etc all complete.

Supplying all materials, labour, t&p for fitting and fixing of C.I sluice valve/N.R Valve/ Air Valve with double flanged ends for water works purposed including jointing Materials like rubber insertion , Nut Bolt etc all completef

150mm dia C.I Sluice Valve ( P.N-1.6)

150mm dia C.I N.R Valve ( P.N-1.6)

25mm dia Single Air Valve

Supplying all materials, labour, t&p for fabricating & fixing of 150mm dia x 900 G.I Bend including all complete as direction of E.I.C.

Supplying all materials, labour, t&p for fabricating & fixing of G.I/C.I/M.STee including cutting & welding etc all complete as direction of E.I.C.

150 x 150 x 100 mm dia C.I Tee connection

Supplying all materials, labour, t&p for filling pipe line trenches with sand including watered and rammed with lead of all materials to site.

Suppling all materials, labour, t&p for construction of brick masonary sluice valve chamber of size 0.90x 0.90 x 0.90 mtr as per P.H. Specification etc. all complete.

Supplying all materials, labour, t&p and providing cement concrete (1:3:6) using 4cm size c.b.h g metal including hoisting, laying and curing with ead of all materials to site.

Suppling all materials, labour, t&p for providing Cement concrete (1:2:4) with 12mm size crusher broken hard granite metal including cost of all labour, materials with all taxes, lead, T & P etc all complete.

Suppling all materials, labour, t&p for transportation of excess earth from work site by mechanical means including loading & unloading within 5 K.M lead etc. all complete.

Supplying all materials,labour ,t&p for fitting fixing of 15 H.P Submersible pump set etc all complete .

Supplying all materials,labour ,t&p for fitting fixing of 15 H.P control panel etc all complete .

Supplying fitting fixing of 6mm2 three core flat cable etc all complete

Internal electrification to Pump house

Internal electrification of pump house with suitable main switch, bus bar, kitkat , cable and yard lighting arrangement

Supplying fitting fixing 125 Amp TPN Main switch of following capacity (IS 13940 part 3/1993 ) on existing surface/wall mounting and complete with HRC fuse links, interconnection , earthing etc. As required.

Recessed wiring to 4/25 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS 694/1990 in 32mm dia non-metallic heavy duty flesible conduit with 1.6mm thick along with 2 x 16mm FR PVC insulated single core multisrand copper conductor as earth wire as required (Make of wire Finolex/ L&T/ Anchor/ Havells/V-Guard)

Suppling all materials, labour, t&p for wiring the light/plug point with supply of 1.0 sqmm PVCcopper wire, 5 Amps F/T switch or socket with angle holder/ ceiling rose over PVC board wiring inside 20mm dia PVC pipe with supply of iron board and bakalite cover all complete

Light point/Fan Point

Plug point

Supplying fitting fixing 200 Amp extension type kit kat fuse of approved make and standard quality with socketing both end with copper socket.

Suppling all materials, labour, t&p and laying 2.24 mm dia bare copper wire as running earth and testing with lead of all materials to site

Suppling all materials, labour, t&p making earthing with G.I earth pipe 3mtr long 40mm dia ISI marked including accessories and providing masonary encloser with cover plate having locking arrangement and watering pipe etc with charcoaland salt as required with with lead of all materials to site

Suppling and laying 6 SWG G.I wires ISI marked at 0.5 mtr below ground level for conductor earth electrode including solding etc as required.

Suppling all materials, labour, t&p and fixing M.V danger board of 200mm x 150mm made mild steel at least 2mm thick and vitreous enameled white on both sides and with inscription in single red colours on front side as required.

Suppling fitting fixing of 16mm2 3 core flat cable etc. all complete

External electrification

PART-A

63 KVA Transformer

PART-B

11 KV L.T line including all materials